Dyson DC23-STOWAWAY user manual

Your Dyson vacuum might be blowing out air due to a number of reasons:
1. Clogged Filters: The filters might be blocked or clogged due to dust and dirt. Cleaning or replacing them may solve the issue.

. Full Dust Bin: If the dust canister or bag is full, the vacuum may start to expel air. Make sure to regularly empty the bin.

3. Vacuum Blockage: The air paths or the hose might be blocked. Check for blockages and remove any you find.

4. Faulty Motor: An issue with the motor or fan might be causing this problem. If this is the case, you will probably need to get the vacuum serviced or repaired.
Remember to always turn off and unplug your vacuum cleaner before trying to service it or access the inside parts. If the issue persists, it might be best to consult with a professional or contact Dyson support.

The Dyson DC23 vacuum cleaner has a suction power of 220 airwatts.

Yes, the Dyson DC23 Stowaway vacuum cleaner comes with a turbine head that is powered by the vacuum's suction. The turbine head includes a rotating brush bar which helps to agitate and lift dirt and debris from carpets and other surfaces.

There could be several reasons why your Dyson DC23 Stowaway vacuum is not suctioning properly:
1. Blockage: Check for any blockages in the hose, wand, or brush bar. Remove any debris or obstructions that may be blocking the airflow.
2. Dirty filters: Dirty filters can restrict suction. Make sure to clean or replace both the washable pre-filter and the post-motor filter according to the manufacturer's instructions.
3. Clogged canister: If the canister is full or has a clog, it may hinder suction. Empty the canister and ensure there are no obstructions in the bottom or around the entry point.
4. Damaged hose or brush bar: Inspect the hose and brush bar for any damages or clogs. If there is any damage, it might affect the suction ability. Replace or repair these components as necessary.
5. Weak motor: If none of the above solutions work, it's possible that the motor is weakening or malfunctioning. In such cases, contacting Dyson customer support or a professional technician for assistance is recommended.
Remember to always refer to the user manual for specific troubleshooting steps and maintenance instructions concerning your Dyson DC23 Stowaway vacuum.