Epson ET-2720 user manual

To connect your Epson ET-2720 to Wi-Fi, please follow the steps below:
1. Ensure that your Wi-Fi network is set up and working properly.
. Turn on your Epson ET-2720 printer.
3. On the printer's control panel, press the Home button, which is located on the left side.
4. Use the arrow buttons to navigate and select the Wi-Fi Setup option. Press OK.
5. Choose Wi-Fi Setup Wizard and press OK.
6. The printer will now search for available Wi-Fi networks. Wait for the search to complete.
7. A list of available networks will be displayed. Use the arrow buttons to select your Wi-Fi network, and then press OK.
8. If prompted, enter the password for your Wi-Fi network using the displayed keyboard. Press OK to confirm.
9. The printer will attempt to connect to your Wi-Fi network. Once the connection is successful, a message confirming the same will appear on the screen.
10. Press OK to complete the setup.
Your Epson ET-2720 printer is now connected to your Wi-Fi network, allowing you to print wirelessly from your devices.

As an AI language model, I don't have real-time information or access to current product availability. However, I can provide general guidance. Product availability may vary depending on your location and the specific retailer or distributor. It's recommended to check with authorized Epson retailers or contact Epson directly to get the most accurate and up-to-date information about the availability of the Epson ET-2720 printer.