Epson EXPRESSION-HOME-XP-235 user manual

You can check the ink levels on your Epson XP 235 printer by following these steps:
1. Power on your printer.
2. On your computer, navigate to the system tray located on the lower-right corner of the screen.
3. From the system tray, find and double-click on the Epson printer icon. This action will open the Epson printer software.
4. Look for and click the icon that represents ink levels. This will show you the current ink levels of your printer.
Remember, you can also check the ink levels on your printer's LCD screen. If one of the ink cartridges is low or out of ink, there will be a notification on the screen.
Please note: The printer’s ink levels may not be displayed if you're using non-Epson ink cartridges. Because of this, it's always recommended that you use original Epson cartridges for the best result.

There could be several reasons why your Epson printer is not working after replacing ink cartridges. Here are some possible causes and solutions:
1. Incorrectly installed cartridges: Make sure the cartridges are correctly installed in the printer. Check if they are properly seated in their respective slots. Remove and reinsert the cartridges to ensure they are securely in place.
2. Cartridges are not recognized: If the printer does not recognize the newly installed cartridges, it could be due to dirty or damaged contacts on the cartridges or inside the printer. Clean the metal contacts on the cartridges using a lint-free cloth and alcohol. Additionally, lightly wipe the corresponding contacts inside the printer.
3. Protective tape or seal: Ensure that you have removed the protective tape or seal from the cartridges before installation. Leaving the tape on can prevent the ink from flowing properly.
4. Low ink level notification: Some Epson printers may not work if the ink level is critically low or if a specific cartridge is empty. Check the printer software or LCD panel for any error messages related to low ink levels. If necessary, replace any empty cartridges or refill the ink tanks.
5. Firmware or driver issues: Check if your printer's firmware or driver needs to be updated. Visit the Epson support website and download the latest firmware or driver for your specific printer model. Install the update as instructed and restart your printer.
6. Clogged printhead or nozzles: If the printer has not been used for a while, the printhead nozzles may become clogged, causing print quality issues or preventing the printer from functioning correctly. Use the printer's built-in cleaning function to unclog the printhead. If the problem persists, perform a deep cleaning cycle.
7. Other hardware or software issues: If none of the above solutions work, there may be other hardware or software issues preventing the printer from working. In this case, it is recommended to contact Epson customer support for further assistance or consult a professional technician for repair.