Humax HDR-FOX-T2 user manual

No, the Humax HDR-FOX T2 does not have built-in Wi-Fi. However, you can connect it to your home network using an Ethernet cable to access online features such as streaming services, internet radio, and software updates. Alternatively, you can purchase a separate Wi-Fi dongle to enable wireless connectivity for the device.

There could be several reasons why your Humax HDR-FOX T2 box is not working. Here are some common issues and possible solutions:
1. Power supply: Make sure the box is properly connected to a power source and that the power button is turned on. If the box doesn't turn on at all, try plugging it into a different outlet or using a different power cord.
2. No signal or weak signal: Check the cables connecting the box to your TV or other devices. Make sure they are securely plugged in and undamaged. If you are using an antenna for over-the-air TV, try repositioning it or using a different one to see if reception improves.
3. Firmware or software issues: If the box turns on but doesn't function properly, it may need a software update. Check the Humax website or contact their customer support for instructions on how to update the firmware. You can also try resetting the box to its factory settings, but note that this will erase all saved settings and recordings.
4. Hard drive problems: If the box freezes or doesn't respond to commands, it could indicate an issue with the internal hard drive. Try unplugging the box for a few minutes, then plugging it back in to see if it resolves the issue. If the problem persists, you may need to contact Humax customer support for further assistance.
If none of these solutions work, it's recommended to contact Humax customer support for more specific troubleshooting guidance or to inquire about repairs or replacements.