iRobot BRAAVA-JET-240 user manual

The Braava Jet 240 battery typically lasts for approximately one hour of cleaning time.

According to iRobot, the manufacturer of the Braava jet 240, they recommend using their own Braava jet Hard Floor Cleaning Solution. This cleaning solution is specially formulated for use with the Braava jet and is designed to effectively clean tough dirt and grime on hard floors. It is important to use this specific solution as it is specifically designed to work with the Braava jet and may produce the best cleaning results.

There could be several reasons why your Braava 240 is not spraying. Here are a few troubleshooting steps you can try:
1. Check the water reservoir: Ensure that the water reservoir is properly filled with water. If it is empty or low on water, the robot will not be able to spray.
2. Clean the nozzle: The nozzle of the robot might be clogged with dirt or debris. Remove the nozzle and clean it thoroughly. You can use a small brush or even a toothpick to remove any obstructions.
3. Check the spray jets: Make sure that the spray jets are not blocked or clogged. Remove any debris that might be blocking the spray jets.
4. Check the battery: If the battery is low, the robot might not spray. Ensure that the robot is fully charged before trying to use the spraying function.
5. Restart the robot: Try restarting the robot by turning it off and on again. Sometimes a simple reset can fix any software or connectivity issues.
If none of these steps work, it might be a hardware issue with the robot. In that case, it's recommended to contact iRobot customer support for further assistance.