JBL TUNE-125TWS user manual

1. Turn on your JBL earbuds by pressing the power button.
2. If they have been connected to some device previously, they will automatically try to connect to that device. If you want to connect the earbuds to a new device, you need to put them into pairing mode.
3. To put the earbuds into pairing mode, press and hold the power button or the bluetooth button (depending on your earbuds model) for about five seconds until the LED light on the earbuds starts flashing red and blue.
4. When the earbuds are in pairing mode, you’ll be able to connect to them with your device’s Bluetooth settings.
5. Go to your device’s Bluetooth settings and select "JBL Earbuds" to pair.
Remember the earbuds may have different ways to enter pairing mode depending on the specific model. Always refer to your product's manual for the most accurate instructions.

To turn up the volume on your JBL Tune 125TWS earbuds, follow these steps:
1. Put on your earbuds and ensure they are properly connected to your device via Bluetooth.
. Locate the physical buttons on the earbuds itself, usually found on the sides or back of the earbuds.
3. On the right earbud, there should be a volume up button. Press the volume up button to increase the volume level.
4. Keep pressing the volume up button until you reach the desired volume level.
5. You can also adjust the volume directly from your connected device. Use the volume control buttons on your smartphone, tablet, or other connected device to increase the volume.
Note: The left earbud usually controls play/pause, answering calls, or activating voice assistants, so the volume adjustment is typically on the right earbud. The volume on the JBL Tune 125TWS is controlled independently from your connected device, so make sure to adjust the volume on both the earbuds and your device if necessary.

To adjust the volume on your JBL earbuds, you can follow these steps:
1. Locate the volume controls on your JBL earbuds. Depending on the model, the buttons may be placed on the earbud itself or integrated into the control module or cable.
2. Identify the volume up (+) and volume down (-) buttons. They are commonly labeled with a plus (+) and a minus (-) sign.
3. Once you have found the volume buttons, press the volume up (+) button to increase the volume or the volume down (-) button to decrease the volume.
4. Keep pressing the volume up (+) or down (-) button until you reach your desired volume level.
Note: The exact process may vary depending on the specific model of JBL earbuds you own. Consult the user manual or instructions provided by JBL if you encounter any difficulties or if the above steps do not work as expected.