JBL WIRELESS-MICROPHONE user manual

To set up your JBL wireless microphone, follow these steps:
1. Unpack the microphone: Remove the microphone from its packaging and ensure all included accessories are present.
2. Charge the microphone: Connect the provided USB charging cable to the microphone's charging port and the other end to a power source or computer. Allow the microphone to charge fully before proceeding.
3. Turn on the microphone: Locate the power switch on the microphone and slide it to the "On" position. Some models may have a button to press instead of a switch.
4. Connect the receiver: Depending on your JBL model, you may need to connect a wireless receiver or a compatible audio device. Refer to your microphone's user manual for specific instructions on how to connect the receiver properly.
5. Sync the microphone and receiver: Press and hold the sync button on the wireless receiver until the LED indicator starts flashing. Then, press the sync button on your JBL microphone. The LED indicator on both devices should synchronize or stop blinking, indicating a successful pairing.
6. Adjust the microphone settings: Most JBL wireless microphones have adjustable settings such as volume, gain, frequency, and channel. Refer to your microphone's user manual to make any necessary adjustments.
7. Test the microphone: To ensure proper setup, test your JBL microphone by using it with a compatible audio device or through a connected sound system. Speak or sing into the microphone, and check if the sound is clear and without interference.
Keep in mind that specific instructions may vary depending on the JBL microphone model you own, so it's always recommended to consult the user manual for your particular device.

To unmute your JBL wireless microphone headset, you can follow these steps:
1. Locate the mute button on your JBL headset. It is usually located on the side of the headset or on the microphone boom.
. Press the mute button once to unmute the headset. This will deactivate the mute function and allow audio to be transmitted from the microphone.
3. Check for a visual indicator on the headset, such as an LED light, which might show whether the headset is muted or unmuted. If the light is on or changes color, it indicates that the headset is unmuted.
If pressing the mute button does not unmute the headset, you can try the following:
1. Check the volume control on the headset. Ensure that the volume is turned up and not set to a very low level or muted.
. If your JBL headset has additional control buttons or knobs, check if there are any dedicated mute buttons or controls and make sure they are set to the unmute position.
3. Restart any connected devices that you are using with the headset, such as a computer or mobile device. Sometimes, the headset mute function can be influenced by the connected device's settings.
If these steps do not resolve the issue, it is recommended to refer to the user manual of your specific JBL wireless microphone headset model for further instructions.

To turn off your JBL wireless microphone, you can follow these steps:
1. Locate the power button on your JBL microphone. It may be located on the front, side, or bottom of the microphone, depending on the model.
. Press and hold the power button for a few seconds until the LED indicators on the microphone turn off. The LED indicators may be located on the power button or somewhere else on the microphone body.
3. Once the LED indicators are off, your JBL microphone should be turned off.
If you're unable to locate the power button or the microphone doesn't have a specific power button, make sure to consult the user manual for your specific JBL microphone model for detailed instructions on how to turn it off.

To unmute your JBL VM200 wireless microphone, you can follow these steps:
1. Locate the power/mute button on the microphone. It is usually located on the bottom or side of the device.
. Press and hold the power/mute button for a few seconds until you see the microphone's indicator light change or hear a beep sound.
3. Release the button. This should unmute the microphone, and it should now be ready to use.
If the above steps don't unmute the microphone, you can also check the user manual that came with your JBL VM200 for specific instructions on how to unmute it.