Jura IMPRESSA-C60 user manual

The "Open Switch" message on a Jura Impressa C60 typically refers to a situation where the machine cannot detect the presence of the drip tray or the drip tray is not inserted properly. The machine has a safety switch that prevents operation if the drip tray is not correctly placed. Therefore, the message serves as a reminder to check if the drip tray is inserted correctly or if any blockages are preventing it from being recognized by the machine.

To get your Jura Impressa C60 coffee machine out of the descaling mode, you can follow these steps:
1. Press the "P" or "Program" button on your machine. This will bring you into the programming mode.
2. Use the up and down arrows on the display to scroll through the menu options until you find "Descaling."
3. Once you have found "Descaling," press the "OK" or "Start" button to select it.
4. The machine will now prompt you to add water and descaling solution into the water tank. Follow the instructions provided by the machine to complete this step.
5. After adding the descaling solution, the machine will begin the descaling process. Allow the machine to complete the process.
6. Once the descaling process is finished, the machine will ask you to empty the drip tray and waste container.
7. After emptying the drip tray and waste container, the machine will prompt you to rinse and refill the water tank.
8. Rinse the water tank thoroughly and refill it with fresh water.
9. Press the "Rinse" or "Finish" button to start the rinsing process.
10. Once the rinsing process is complete, the machine should exit the descaling mode and return to its normal operation.
By following these steps, you should be able to successfully exit the descaling mode on your Jura Impressa C60 coffee machine.