Karcher WD2 user manual

There could be several reasons why your Kärcher WD2 vacuum is not working.
1. Filter Blockage: The filter of your vacuum might be blocked by dirt and dust, thus reducing suction. Clean the filter thoroughly or replace if necessary.
2. Full Dirt Bag: The bag could be full, blocking the airflow hence reducing suction. Check the bag and replace if it is full.
3. Power Issue: Check if the vacuum is properly plugged in and the power switch is ON. If the device is not turning on, there could be an issue with the power supply.
4. Hose Blockage: There might be a blockage in the hose, wand, or the vacuum head. Inspect these areas and clean any obstructions.
5. Motor Issue: If the motor of your vacuum cleaner is not working, you may hear a humming noise. This case may require professional service.
Remember to disconnect the vacuum from power source before starting any troubleshooting. If the problem persists, contact Kärcher's customer service or go to a professional for repair.

Yes, the Kärcher WD2 can be used on carpets. It is a wet and dry vacuum cleaner that is capable of cleaning both dry and wet surfaces, including carpets. However, keep in mind that the WD2 is not specifically designed for deep carpet cleaning like a specialized carpet cleaner. It can help in removing dust, dirt, and smaller spills from carpets, but it may not be as effective as a dedicated carpet cleaner.

Yes, the Kärcher WD2 can be used without a bag. It has a container capacity of 12 liters which can be used to collect dust and dirt without the need for a bag.

Yes, the Kärcher WD2 is a wet and dry vacuum cleaner, meaning it is designed to vacuum both dry debris, such as dust and dirt, as well as liquids, including water. The WD2 has a special water suction feature that allows you to effectively vacuum water spills or even small amounts of standing water. However, it's important to note that the WD2 is not designed for large-scale water suction, such as flooded areas.