Kenwood DRV-A601W user manual

To update your Kenwood DRV-A601W dashcam, you can follow the steps below:
1. Start by visiting the Kenwood website and navigate to the support section.
2. Search for the DRV-A601W dashcam model and find the software or firmware updates available for download. Make sure to download the latest version compatible with your specific device.
3. Connect your dashcam to your computer using a USB cable.
4. Once connected, open the downloaded firmware update file on your computer.
5. Follow the on-screen instructions provided by the update software to complete the installation process. This usually involves selecting your dashcam model, verifying the current firmware version, and proceeding with the update.
6. During the update process, it is essential to keep your dashcam connected to the power source to ensure a stable power supply. Avoid any interruptions or disconnections during the update.
7. Once the firmware update is complete, disconnect the dashcam from your computer.
8. Power on your dashcam and check to ensure that the update was successful. You can verify the firmware version on the dashcam's settings menu.
Remember that firmware updates can vary depending on the manufacturer and model, so it's always recommended to refer to the specific instructions provided by Kenwood for your DRV-A601W dashcam model.