Krups ESSENTIAL-EA8160 user manual

To reset your Krups EA81 coffee machine, you can follow these steps:
1. Ensure the coffee machine is turned on and functioning properly.
2. Locate the "On/Off" button on the front of the machine and press and hold it for about five seconds. This will initiate the reset process.
3. Keep holding the "On/Off" button until you see the display screen blinking or showing some kind of reset message.
4. Release the button and wait for the machine to power off and then power back on again.
5. Once the machine has restarted, it should be reset to its default settings.
Note: The specific reset procedure may vary depending on the model and firmware version of your Krups EA81 coffee machine. If these steps do not work, refer to the user manual or contact Krups customer support for further assistance.

There could be several reasons why your Krups frother is not working. Here are some possible solutions:
1. Check the power source: Ensure that the frother is properly plugged into a working electrical outlet. If it is connected to an extension cord, make sure that the cord is functioning correctly.
2. Frother not switched on: Double-check that the power switch on the frother is turned on.
3. Insufficient milk quantity: Make sure you are using enough milk for frothing. The minimum and maximum level markings are usually indicated on the frother's jug.
4. Milk temperature: Ensure that the milk you are using is cold, preferably refrigerated. Frothing hot milk may cause issues with the frother.
5. Frother attachment not in place: Check if the frother attachment is correctly assembled on the frother base. If it is not aligned correctly or if it has come loose, it may prevent the frother from functioning properly.
6. Frother clogged: Over time, milk residues can accumulate and clog the frother. Ensure that the frother is clean and free from any blockages. Refer to the user manual for proper cleaning instructions.
7. Defective frother unit: If none of the above solutions work, there might be an issue with the frother itself. Contact Krups customer support or take the frother to an authorized service center for assistance or repair.
Remember to refer to your Krups Essential-EA8160 user manual for specific troubleshooting instructions related to your model.