Lenovo ACTIVE-PEN-2 user manual

The buttons on the Lenovo Active Pen 2 serve different functions depending on how you use them.
1. Top Button (also known as the Eraser button): This button, located on the top end of the pen, can be programmed to perform different functions, such as opening a specific app or executing a specific command, when pressed. By default, it is used as an eraser when you flip the pen and use it on the touchscreen.
2. Side Buttons (also known as Barrel buttons): With two buttons on the side of the pen, these can also be customized through the Lenovo Pen Settings app in your device. They typically function as right and left click buttons, similar to a standard mouse.
It's worth noting that the specific functions can vary between devices and depending on any custom settings you may have applied. Always check your device's manual or support documentation for definitive information.

To check the battery status of your Lenovo Active Pen 2, you can follow the steps below:
1. On your Windows desktop, click on the "Start" button or press the Windows key on your keyboard.
. In the search bar, type "Lenovo Pen Settings" and select the corresponding app from the search results.
3. Once the Lenovo Pen Settings app opens, you should see the battery level of your Active Pen 2 displayed on the main screen.
Alternatively, you can also check the battery level of your Lenovo Active Pen 2 using the following method:
1. Remove the cap or top part of your Active Pen 2.
. On the lower part of the pen, you'll find an LED light indicator.
- If the LED light is blinking green, it indicates that the battery is above 20%.
- If the LED light is blinking yellow, it indicates that the battery is below 20%.
- If the LED light is blinking red, it indicates that the battery is critically low and needs to be replaced or recharged.
Please note that the specific steps and details may vary depending on the version of Windows you are using and the Lenovo Pen Settings app version installed on your device.

To pair your Lenovo Active Pen 2, follow these steps:
1. Ensure that your compatible Lenovo device is turned on and functioning properly.
. Remove the cap from the pen and insert the AAAA battery.
3. Press and hold the top button on the pen for a few seconds until the green LED indicator light starts blinking.
4. On your Lenovo device, go to the Start menu and open the "Settings" app.
5. In the Settings menu, click on the "Devices" option.
6. Under the Devices menu, select "Bluetooth & other devices" from the left sidebar.
7. On the right-hand side, click on the "+ Add Bluetooth or other device" option.
8. In the Add a device window, select "Bluetooth" to initiate the Bluetooth pairing process.
9. Your Lenovo device will start searching for nearby Bluetooth devices. Wait for it to detect the Active Pen 2.
10. Once the Active Pen 2 is detected, it will appear in the available devices list. Click on it to start the pairing process.
11. Follow any on-screen prompts or instructions to complete the pairing process.
12. Once the pairing is successful, the Active Pen 2 will be connected to your Lenovo device, and you can start using it.
Note: Make sure that Bluetooth is enabled on your Lenovo device before starting the pairing process. Additionally, the specific steps may vary slightly based on the operating system and device model you are using.