Linx 1010 user manual

To turn on your Linx 1010 tablet, you just need to press and hold the power button for a few seconds. The power button is located on the top edge of the tablet. When the tablet comes on, you should see the Linx logo on the screen. If the tablet does not turn on, it may need to be charged. Connect it to a power source using the AC adapter and charge it for a few hours before trying to turn it on again.

To charge your Linx 10 tablet, follow these steps:
1. Plug the USB cable into the charging port on the tablet. The charging port is usually located on the bottom or the side of the tablet.
. Connect the other end of the USB cable to a power source, such as a computer USB port or a wall adapter. Make sure the power source is turned on.
3. Once the cable is connected, the tablet should start charging automatically. You should see a battery icon or an indicator on the screen showing that it is charging.
4. Leave the tablet connected to the power source until it reaches a sufficient charge. It may take a couple of hours to fully charge the tablet, depending on the battery level.
5. You can check the battery status by swiping down from the top of the screen to open the notification panel. Look for the battery percentage or icon to see the current charge level.
Remember to use the original USB cable and charger that came with the Linx 10 tablet for optimal charging performance.

To reset your Linx 12x64, you can follow these steps:
1. Make sure the device is turned off completely.
2. Press and hold the volume up button, then press and hold the power button at the same time.
3. Keep holding both buttons until the Linx logo appears on the screen. Once you see the logo, you can release the buttons.
4. You will then be taken to the UEFI/BIOS settings menu. Use the volume up and volume down buttons to navigate through the options.
5. Look for the "Restore Factory Defaults" or "Reset to Default" option. Select it using the power button.
6. Confirm the reset by selecting "Yes" or "OK" when prompted.
7. Wait for the reset process to complete. This may take a few minutes.
8. Once the reset is done, the device will reboot and start up as if it was brand new.
Note: Resetting your device will erase all your personal data, so make sure to backup any important files before proceeding.