NETGEAR DG834G user manual

To get your Netgear DG834G modem to work, follow the steps below:
1. Connect your modem to a power source and turn it on.
. Connect one end of an Ethernet cable from the modem's LAN port to your computer's Ethernet port.
3. Open a web browser on your computer and enter the default IP address of the modem, which is usually "192.168.0.1" or "192.168.1.1", into the address bar. Press Enter.
4. You will be prompted for a username and password. The default username is usually "admin" and the default password is "password" or "1234". Enter these credentials and click Login or press Enter.
5. Once logged in, you will be directed to the modem's web interface. Here, you can configure various settings.
6. Follow the setup wizard or navigate to the Internet Setup section to configure your modem's internet connection. Depending on your ISP, you may need to enter your username and password provided by them.
7. Save and apply the settings once you have entered the necessary information.
8. After the settings are applied, wait for a few moments for the modem to establish a connection with your ISP.
9. You should now have a working internet connection through your Netgear DG834G modem.
Note: If you encounter any issues or if the default IP address or login credentials have been changed, you may need to reset the modem to factory settings by locating the reset button (usually a small hole) on the back of the modem. Use a paperclip or similar object to press and hold the reset button for a few seconds until the lights on the modem blink. This will reset the modem to its default settings, allowing you to start the setup process from scratch.

To reset your Netgear DG834G router, follow these steps:
1. Locate the reset button on the back of the router. It is a small button usually recessed inside a small hole.
. Using a paper clip or a similar pointed object, press and hold the reset button for about 10-15 seconds.
3. Release the reset button after the specific duration. The router will restart and all settings will be restored to factory defaults.
Note: Resetting the router will erase all the customized settings such as Wi-Fi network name, password, and any other configurations you might have made. After the reset, you will need to reconfigure the router according to your preferences.