One for All REMOTE-CONTROLLERS user manual

User manual for the device One for All REMOTE-CONTROLLERS

Device: One for All REMOTE-CONTROLLERS
Category: Uncategorized
Manufacturer: One for All
Size: 2.8 MB
Added : 7/25/2023
Number of pages: 2
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for One for All REMOTE-CONTROLLERS. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with One for All REMOTE-CONTROLLERS.

For your convenience

If looking through the One for All REMOTE-CONTROLLERS user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual One for All REMOTE-CONTROLLERS on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual One for All REMOTE-CONTROLLERS to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
One for All REMOTE-CONTROLLERS Manual - Online PDF
Advertisement
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual One for All REMOTE-CONTROLLERS but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to One for All REMOTE-CONTROLLERS. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

One for All REMOTE-CONTROLLERS - Support and Troubleshooting

How do I reset my one for all remote control?

To reset a One For All remote control, follow these steps:
1. Turn on the device you want to control with the remote.
. Press and hold the Magic button and the device button (e.g., TV, DVD, AUX) simultaneously for three seconds until the LED light on the remote stays on.
3. While still holding the Magic and device buttons, enter the code "981" using the numeric keypad on the remote.
4. Release both buttons. The LED light should blink twice, indicating the reset was successful.
5. Now, reprogram the remote control by entering the correct code for your device or by using the auto-search method.
Note: If the LED light doesn't blink twice, repeat the steps above and make sure you're holding down the buttons properly. Also, if you performed a reset on the One For All remote, any previously programmed codes will be erased, and you will need to reprogram them.

How do I program my one for all remote control?

To program your One For All remote control, follow the steps below:
1. Turn on the device you want to control with the remote (e.g., TV, DVD player, audio system).
2. Press and hold down the "Magic" or "SETUP" button on your remote control until the indicator light stays on.
3. Enter the provided 4-digit setup code for your specific device using the number buttons on the remote control. You can find the codes in the manual that came with your remote or on the One For All website.
4. Once you have entered the correct 4-digit code, the indicator light on the remote control will blink and turn off.
5. Point the remote control towards the device you want to control and press the power button. If the device turns off, you have successfully programmed your remote. If not, repeat steps 2-5 with a different setup code until the device responds.
6. After programming, press the "Magic" or "SETUP" button again to save the code.
If your specific device's setup code is not available or you are unable to find it, you can try the manual code search method. Here's how:
1. Turn on the device you want to control.
2. Press and hold the "Magic" or "SETUP" button until the indicator light stays on.
3. Press the "Power" (or equivalent) button repeatedly while pointing the remote control towards the device. Keep pressing until the device turns off.
4. As soon as the device turns off, press the "Magic" or "SETUP" button again to save the code.
Remember, these instructions are general guidelines, and the exact process may vary depending on the model of your One For All remote control. Refer to the user manual or manufacturer's website for specific instructions for your remote control model.

How do you program a one for all remote without codes?

Programming a One For All remote without codes can be a bit tricky, as the remote usually requires specific codes to be programmed correctly. However, there are a few general methods you can try:
1. Auto Search: This method allows the remote to search for the correct code by cycling through all possible codes until it finds the right one. Here's how to do it:
a. Turn on the device you want to control with the remote.
b. Press and hold the "Setup" button on the remote until the LED light stays on.
c. Enter the code "9-9-1" using the number keys.
d. Aim the remote at the device and press the "Power" button.
e. Keep pressing the "Power" button every few seconds until the device turns off.
f. Once the device turns off, press the "Enter" button on the remote to save the code.
2. Manual Search: If the auto search method does not work, you can try the manual search method, which involves cycling through every code manually. Here's how:
a. Turn on the device you want to control with the remote.
b. Press and hold the "Setup" button on the remote until the LED light stays on.
c. Enter the code "9-9-0" using the number keys.
d. Use the number keys to manually enter each code, one by one, starting from 0001.
e. After entering each code, try pressing the "Power" button to see if the device turns off.
f. Keep cycling through the codes until you find the one that turns off the device.
g. Once the device turns off, press the "Enter" button on the remote to save the code.
Note that these methods may not always work as intended, especially if the remote requires specific codes. In such cases, it is advisable to refer to the instruction manual or contact the manufacturer for further assistance.

What is the magic button on one for all remote?

The "magic" button on a One For All remote control refers to the "Magic" or "Magic Key" button. This button is typically labeled with a symbol of a wand or magic hat. The purpose of the magic button varies depending on the specific model and the devices you are controlling. It is designed to simplify the operation of multiple devices simultaneously. By pressing the magic button, you can set the remote control to control multiple devices (e.g., TV, DVD player, sound system) with a single button press.
Alternative user manuals
# User manual Category Download
1 One for All URC 7960 Owner's manual Uncategorized 0
2 One for All SV 9425 Manual Uncategorized 0
3 One for All URC-1669 Instruction manual Uncategorized 0
4 One for All SV 9030 User manual Uncategorized 0
5 One for All REMOTE-CONTROLLERS Manual Uncategorized 0
6 One for All URC-7110 Manual Uncategorized 0
7 One for All URC-7110 User manual Uncategorized 0
8 One for All FERNBEDIENUNGEN Manual Uncategorized 0
9 One for All TELECOMMANDES Manual Uncategorized 0
10 One for All REMOTE-CONTROLLERS Manual Uncategorized 0
11 One for All FERNBEDIENUNGEN Manual Uncategorized 0
12 One for All URC-7110 User manual Uncategorized 0
13 One for All FERNBEDIENUNGEN Guide Uncategorized 0
14 BUSH 16GB MP3 Player Instruction manual Uncategorized 0
15 Sony HDR-AS15 Owner's manual Uncategorized 0
16 Electrolux EKK54506OW User manual Uncategorized 0
17 Panasonic SLJ910 Operating instructions Uncategorized 0
18 Sony NWZ WS613 Owner's manual Uncategorized 0