Philips AVENT-SCF870 user manual

According to the Philips Avent SCF870 user manual, it takes approximately 10-15 minutes to steam food using the steamer blender. However, the exact time may vary depending on the type and quantity of food being steamed.

To use your Philips Avent food maker SCF870, follow these steps:
1. Ensure that the appliance is clean and disinfected before use. Wash the jar, blade, and spatula in warm, soapy water, or put them in a dishwasher.
2. Place the blade unit in the bottom of the jar and screw it tightly.
3. Cut the fruits or vegetables into small pieces, ensuring they fit in the jar.
4. Put the ingredients in the jar, making sure you don't exceed the maximum capacity line indicated on the container. You can steam different ingredients at once, saving time and preserving nutrients.
5. Fill the water reservoir on the back of the appliance with the required amount of water specified in the user manual. Make sure the water level is between the MIN and MAX lines.
6. Place the jar on top of the base unit and turn it clockwise until it stops.
7. Plug in the food maker and press the power button. The orange light will turn on.
8. Adjust the steaming and blending time by pressing the respective buttons. You can choose from different settings based on the consistency of the food and your baby's age.
9. The steaming process will begin, and the light will turn blue. The food maker will automatically switch to blending mode after steaming.
10. Once the food is ready, the appliance will beep, and the light will turn off. Unplug the food maker and wait for a few minutes to allow it to cool down.
11. Carefully remove the jar from the base unit using the spatula or oven mitts to avoid burns.
12. Open the jar and blend the food to the desired consistency using the provided spatula or a separate blender.
13. Allow the food to cool down before serving it to your baby.
Always refer to the user manual for specific instructions and safety guidelines for your Philips Avent food maker model (SCF870).

According to the product manual, for steaming and blending fruits or vegetables, the recommended water level is 100 ml. However, for blending only, no water is needed. It's important to refer to the product manual for precise instructions and safety guidelines.

To clean your Philips Avent 2 in 1 steamer (model SCF870), follow these steps:
1. Unplug the steamer from the power outlet and let it cool down before cleaning.
. Remove all the parts from the steamer, including the water tank, the basket, and the lid.
3. Wash the water tank, basket, and lid with warm, soapy water. You can use a mild detergent or dish soap.
4. Rinse all the parts thoroughly under running water to remove any soap residue.
5. If there are any stubborn stains or mineral deposits, you can soak the parts in a mixture of vinegar and water for a few hours, then scrub them gently with a soft brush.
6. Wipe the exterior of the steamer with a damp cloth to remove any dirt or spills. Avoid using abrasive or chemical cleaners as they may damage the surface.
7. Once all the parts are clean and dry, reassemble the steamer.
8. Before using the steamer again, make sure there are no water or soap residues left inside, as they could affect the steaming process or contaminate your food.
It's important to clean your steamer regularly to maintain its performance and prevent the buildup of mineral deposits. Refer to the user manual for your specific model for any additional cleaning instructions or maintenance guidelines.