Shark LIFT-AWAY-NV601UK user manual

There could be several reasons why the brush is not spinning on your Shark lift-away vacuum cleaner.
1. Obstruction - One common reason could be that there is something obstructing the brush roll preventing it from spinning, perhaps a build up of hair or debris.
2. Belt issues - The brush roll on your Shark vacuum is powered by a belt, which can become stretched or damaged over time, resulting in the brush not spinning.
3. Electrical issues - An electrical problem could also be causing the brush to not spin. In this case, you should contact Shark customer service for further assistance.
4. Incorrect setting - Make sure your setting is on "carpet" not "hard floor".
In any case, to resolve the issue, check for obstructions and clean the brush roll regularly. If you suspect a belt or electrical issue, consider contacting a professional or Shark customer service.

Yes, there is a reset button on some models of Shark Lift Away vacuum cleaners. The location of the reset button may vary depending on the specific model, but it is typically located on the base of the vacuum cleaner. If you are unsure about the location of the reset button, it is recommended to consult the user manual of your specific Shark Lift Away model for instructions.

When the lights on your Shark Lift-Away NV601UK vacuum blink, it typically indicates an issue or error with the vacuum. The specific meaning of the blinking lights may vary based on the model and brand of the vacuum.
Generally, here are a few possible explanations for blinking lights on a Shark vacuum:
1. Brush Roll Indicator: Some Shark vacuums have a brush roll indicator light that blinks to notify you when the brush roll needs attention. This could mean that the brush roll is tangled, obstructed, or needs cleaning.
2. Blockage or Clog: Blinking lights could indicate a blockage or clog in the vacuum's hose, nozzle, or other attachments. Check all the openings and connections for any debris or obstructions and clear them.
3. Overheating: If the motor or the vacuum is overheating, it may trigger blinking lights as a safety measure. In such cases, turn off the vacuum, unplug it, and let it cool down before using it again.
4. Battery or Charging Issue: For cordless Shark vacuums, blinking lights could indicate a battery or charging issue. Check the battery connection and ensure that it is properly charged. If the problem persists, refer to the user manual or contact Shark customer service for further assistance.
It is recommended to consult the user manual specific to your Shark Lift-Away NV601UK vacuum for accurate information about blinking lights and troubleshooting steps.