Sun Joe MJ401E user manual

The Sun Joe MJ401E lawn mower typically takes around 4 to 5 hours to fully charge its battery.

The Sun Joe MJ401E does not have a reset button. In case of any issues or malfunctions, it is recommended to consult the user manual or contact Sun Joe customer support for assistance.

To adjust the cutting height on a Sun Joe MJ401E lawn mower, you can follow these steps:
1. Locate the cutting height adjustment lever: Look for a lever or a wheel near each wheel of the mower deck. Usually, there will be one on each side of the lawn mower.
2. Determine the desired cutting height: Sun Joe MJ401E offers three cutting height options ranging from 1.18 inches to 2.52 inches. Decide which height you want to mow your lawn.
3. Adjust the cutting height: Depending on the model and design, you may need to adjust the cutting height individually for each wheel or use a single lever to adjust all the wheels simultaneously.
- Individual wheel adjustment: If your mower has an adjustment lever near each wheel, adjust them one by one to the desired height. Lift the lever and move it up or down to select the cutting height for that specific wheel. Repeat the same process for each wheel until all wheels are set at the desired height.
- Single lever adjustment: If your mower has a single lever, it will typically be located near one of the wheels. Lift the lever and move it up or down to simultaneously adjust the cutting height for all wheels. Make sure the lever is set to the same position on all sides for even cutting.
4. Verify the cutting height: Before mowing, visually check all wheels to ensure they are set at the desired cutting height. Double-check the lever positions or wheel settings to confirm everything is adjusted correctly.
Now you are ready to start mowing your lawn with the Sun Joe MJ401E at your preferred cutting height.