Vizio M80-D3 user manual

The Vizio M60 C3 was released in 2015.

The Vizio M80-D3, being a part of the M series, does not have physical buttons on the TV itself. Instead, it relies on a remote control to navigate through its features and settings. It is equipped with an IR (infrared) sensor on the front of the TV, which receives signals from the remote control.

To do a manual setup on a Vizio TV, follow the steps below:
1. Power on your Vizio TV and press the "Menu" button on the remote control.
. Use the arrow keys on the remote to navigate to the "Settings" option, and press the "OK" button to select it.
3. In the Settings menu, navigate to the "Tuner" or "Channels" section. This may be labeled differently, depending on your model.
4. Within the Tuner or Channels section, look for the "Channel Scan" or "Auto Channel Scan" option and select it.
5. Choose the input source you want to scan channels for, such as Antenna or Cable. If you're using an antenna, ensure it is properly connected to the TV.
6. Start the channel scan by selecting the "Scan" or "Start" option. The TV will search for available channels and store them in its memory.
7. Once the scan is complete, you will be able to access and change channels using the channel up/down buttons on your remote control.
8. If you want to manually add or delete channels, navigate to the "Channel List" or "Channel Edit" option in the settings menu. From there, you can customize your channel lineup by adding or removing specific channels.
Note: The steps outlined above are general instructions and may vary slightly depending on your specific Vizio TV model. It is always recommended to refer to the user manual provided with your TV for detailed instructions.

The Vizio M60-C3 has a resolution of 3840x2160, also referred to as 4K Ultra HD.