Yamaha YPG-525 user manual

Yes, the Yamaha YPG-525 has weighted keys.

Yes, the Yamaha YPG-625 has weighted keys.

To connect your Yamaha YPG-535 to your computer, you can follow these steps:
1. Check your computer's available ports: Determine if your computer has a USB port or MIDI ports. The YPG-535 has USB and MIDI capabilities, so either option will work.
2. USB connection: If you have a USB port on your computer, you can connect the YPG-535 using a USB cable. Locate the USB port on the back panel of your keyboard, and connect the other end of the USB cable to an available USB port on your computer.
3. MIDI connection: If your computer has MIDI ports, you can use a MIDI interface to connect your YPG-535. You will need two MIDI cables to connect the keyboard to the MIDI interface, and then connect the interface to your computer using a USB cable or another MIDI cable (depending on the type of MIDI interface you have).
4. Install necessary drivers: If you are using a USB connection, your computer may automatically recognize the YPG-535. However, you may need to install specific drivers if prompted by your operating system. Check the Yamaha website for any available drivers for your model.
5. Configure software settings: Once the connection is established, you can use music software or a digital audio workstation (DAW) on your computer to control or record MIDI data from the keyboard. Configure the software to recognize the YPG-535 as a MIDI input device.
Note: This general guidance assumes that you have a basic knowledge of computer operations and software configurations. The specific steps may vary depending on your computer's operating system and the software you are using. Refer to the user manual for your Yamaha YPG-535 keyboard for more detailed instructions, or consult Yamaha's technical support if needed.