Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS NOTE ON USE …………………………………………………………2 FOR SAFE AND EFFICIENT OPERATION …………………………2 DESCRIPTION OF THE FUNCTIONS …………………………………3 ……………………………………………3 FUNCTION OF THE MAIN UNIT ………………………………………4 FUNCTION OF THE CONTROL UNIT LCD INSTRUCTION ………………………………………………………6 PARAMETER SETTING INSTRUCTION …………………………………7 CONNETIONS ……………………………………………………………9 BAS I C OPER AT I ON … … … … … … … … … …………………10 ……………………………………10 LOADING AND EJECTING THE DISC TRACK SKIP ………………………………………
Streszczenie treści zawartej na stronie nr. 3
NOTE ON USE BE CAREFUL OF HIGH TEMPERA- TO AVOID DUST & MOISTURE TO AVOID PLACING ON UN- DO NOT USE CHEMICALS TURE STABLE LOCATION IF OUT OF WORK, CONTACT KEEP AWAY FROM TV & DO NOT OPEN THE CASE CARE WITH THE POWER CORD SALES AGENCY IMMEDIATELY MAGNETISM For Safe and Efficient Operation SAFETY CERTIFICATION · Select the installation location of your unit carefully. Avoid placing it in direct sunlight. Also avoid locations Laser
Streszczenie treści zawartej na stronie nr. 4
IMPORTANT SAFETY INSTRUCTION 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safe
Streszczenie treści zawartej na stronie nr. 5
40 1. UNIT 1-CONTROL OPERATION PANEL 11. CUE BUTTON This operation panel remotely controls the main unit 1. The cue function allows the CD returning to the memorized point. In PAUSE mode, pressing the CUE button to set the cue 2. UNIT 2- CONTROL OPERATION PANEL point, and the CUE button blinks; in PLAY mode, press this This operation panel remotely controls the main unit 2. button to pause the unit at the memorized point. 3. EJECT BUTTON 12. BOP BUTTON Press to eject the dis
Streszczenie treści zawartej na stronie nr. 6
NOTE: How to set up the parameter; please refer to 16. ON/OFF BUTTON (PITCH) parameter setting instruction. (Page7) Press the button to be PITCH ON mode, press it SCRATCH: Move the JOG Wheel backward or forward like again on the PITCH ON mode, and blinks with unit scratching a turntable record. This sound effect can be performed on the PITCH OFF mode. independently, or in parallel with other effect. 17. 3 HOT-CUE BRAKE: To change the speed of PAUSE and START. This sound This uni
Streszczenie treści zawartej na stronie nr. 7
LCD INSTRUCTION 1. TOTAL TRACK – the track number of the CD or CARD. 15. MINUTES – Shows the minutes elapsed or remaining depending on mode setting. 2. – The unit is in playing. SECONDS – 16. Shows the seconds elapsed or remaining 3. – The unit is paused depending on mode setting. SINGLE – 4. Shows when the unit is set to play only one track. FRAMES – 17. The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames 5. CONT – Shows when the
Streszczenie treści zawartej na stronie nr. 8
PARAM ETER SETTING INSTRUCTION Effect Menu Note Default Scope BRAKE BK/START_T 1 20 (1 unit = 0.1 sec) 0 ~100 (0.1 ~ 10 sec) BK/STOP_T 2 20 (1 unit = 0.1 sec) 0 ~100 (0.1 ~ 10 sec) PHASER PS/BPM_SYNC 3 ON ON / OFF PS/GAIN 4 50 (%) 0 ~ 100 (%) PS/TIME 5 SYNC OFF: 50 (1 unit = 0.01 sec) 25~800 (0.25 ~ 8 sec) SYNC ON: 4/1 beat 1/4 ~ 64/1 beat FLANGER FG/BPM_SYNC 6 ON ON / OFF FG/GAIN 7 40 (%) 1 ~90 (%) FG/TIME 8 SYNC OFF: 50 (1 unit=0.01sec) 25 ~ 800 (0.25 ~ 8 sec) SYNC ON: 4/1 beat 1
Streszczenie treści zawartej na stronie nr. 9
PARAM ETER SETTING INSTRUCTION NOTE : 1. 15. BK/START_T : The period time before starting music FL/GAIN: Determine the volume of FILTER effect signal. The higher ratio with stronger effect. 2. BK/STOP_T : The period time before stopping music 16. PAN/BPM_SYNC: Add the PAN effect to the music in a cycle 3. PS/BPM_SYNC: Add the PHASER effect to the music in a cycle based upon the selected beat based upon the selected beat 17. PAN/MIX : Determine the volume of signal taken for mixing
Streszczenie treści zawartej na stronie nr. 10
Connections Typical connections with a mixer is illustrated below. Please use it for reference. 115 V 23 0V 60 Hz 50 Hz * Connect the connection cords to the line inputs of your mixer. * The connection cords and the remote control connection cable are supplied with the main unit. * Be sure to use the remote control connection cable which has been supplied. Use of another cable type might cause damage. - 9 -
Streszczenie treści zawartej na stronie nr. 11
BASIC OPERATION Loading and Ejecting the Disc When the disc is loaded, press the EJECT button to eject the disc (This may be done on either the player or the remote control side.) Place a disc in the disc loader 12 cm disc 8 cm disc Push the disc to the loader. While the disc is loaded, the preparation for disc play will begin. When preparation is completed, the total tracks number & total playing time will display. To the de
Streszczenie treści zawartej na stronie nr. 12
TRACK SKIP T o go back through the tracks To advance through the tracks Tracks change as follows Tracks change as follows (This is for a disc containing 4 tracks) When this button is pressed once, the CD player will When this button is pressed once, the CD player skip backward to the beginning of the track, press twice will advance to the beginning of the next track. will skip backward to the
Streszczenie treści zawartej na stronie nr. 13
B B B u u u f f f f f f MATCHING THE BEATS PER MINUTE Match the p itc h by monito ring the music of both UNIT 1 and UNIT 2 by e ar. Whe n the te mpo of the mus ic o f the se le cted C D player is s lo w comp ared to the te mpo of the other player, move the slider to the + s id e and ma tc h the tempo . Whe n fa st, mo ve to the - side . The fo llow ing des crip tion is for the cas e of ma tc hing the p itch o f UNIT 2 to the pitch of the mus ic b eing played on UN IT 1 .
Streszczenie treści zawartej na stronie nr. 14
OPERATION OF CUE (WITH PLAY/PAUSE) 1. In p aus e mode , pres s C UE button to me morize a point fo r playing ba ck. We mean it “c ue po int”. 2. After “c ue po int” is memorized , in play m ode, press ing C UE button will re turn the music ba ck to the cue p oint and k eep it in pa use mo de. 3. Pre ss PL AY button a gain to perform from “c ue po int”. OPERATION OF A AND B/LOOP 1. Set “A POINT” under play mod e by p re ssing A b utto n (
Streszczenie treści zawartej na stronie nr. 15
BEFORE SWITCHING OFF THE POWER When you have finished using the CD player, before switching off the power, ensure that the disc is ejected Do not switch off the power when the Switch off the power after the disc is disc in the loader. ejected. POWER OFF POWER OFF TROUBLESHOOTING GUIDE If difficulties arise with your compact disc player, locate the apparent problem in the left-hand column of the table and follow the corrective action sugge
Streszczenie treści zawartej na stronie nr. 16
USB Driver Installation and Operating Instructions For running program properly, please install the Driver before installing the Application program I. The driver Setup 1. There are three directories on installation CD, please select the Driver directory. 2. Run setup.exe and finish installation of the driver. 3. Please press YES to reboot the computer, if operating system is Win98 or Win ME. Please press No to neglect this step, if operating system is Win 2000 and Win XP. 4. Connect
Streszczenie treści zawartej na stronie nr. 17
II. Application Setup 1. There are three directories on installation CD. Please select the DJMP3 directory. 2. Follow the onscreen instructions to complete the setup. 3. Run DJMP3 program on START menu after finishing application installation. III. Application instructions The files in SD card will automatically be listed in SD card box after running application program. Drag selected files to file list box and release, the selected files will be added to file list box. Selec
Streszczenie treści zawartej na stronie nr. 18
button after you changed SD card. 8. The format button: Format SD card, and all the file will be deleted. If the SD card is fresh, format it before the first use. 9. The exit button: Exit the application program. 10. The download button: Press this button to download files to SD card. 11. The progress bar: Show the downloading progress. 12. The status bar: Displays the total and remaining space of SD card showed in status bar. 13. DJ MP3: Press the button to get the information about t
