Streszczenie treści zawartej na stronie nr. 1 
                    
                        UNVENTED (VENT-FREE) Gas  
MiNi CoMpa CT FiREpla CE
oWNER’s opERa TioN aND iNsT alla TioN MaNU al
PFS
®
US
Shown with Optional 
Cabinet Mantel/Hearth 
Base Accessory
MaNUal MoDEls CGMFN aND CGMFp
REMoTE-REaDy MoDEls VGMRN aND VGMRp
WARNING: If the information in this manual is not fol-
lowed exactly, a fire or explosion may result causing 
property damage, personal injury or loss of life.
— Do not store or use gasoline or other  flammable 
vapors and liquids in the vicinity  of this or any other
                    
                    Streszczenie treści zawartej na stronie nr. 2 
                    
                        TaBE l oF CoNTENTs Safety Information ............................................... 2 Cleaning and Maintenance ................................ 24 Local Codes......................................................... 4 Troubleshooting ................................................. 25 Unpacking............................................................ 4 Specifications .................................................... 29 Product Identification ........................................... 5
                    
                    Streszczenie treści zawartej na stronie nr. 3 
                    
                        saFET y iNFoRMa TioN Do not place clothing or other  Continued flammable material on or near  the appliance. Never place any   DANGER: Carbon monoxide  objects on the heater. poisoning may lead to death! Carbon Monoxide Poisoning: Early signs of Fireplace front and screen be- carbon monoxide poisoning resemble the flu,  come very hot when running  with headaches, dizziness or nausea. If you  heater. Keep children and adults  have these signs, the fireplace may not be  away from hot surfaces to a
                    
                    Streszczenie treści zawartej na stronie nr. 4 
                    
                        17. Operating fireplace above elevations of  saFETy iNFoRMa TioN 4,500 feet could cause pilot outage. Continued 18. Do not operate fireplace if any log is  4. This fireplace shall not be installed in a  broken. Do not operate fireplace if a log  bathroom. is chipped (dime-sized or larger). 5. Do not use this fireplace as a wood-burn- 19. To prevent performance problems, do not  ing fireplace. Use only the logs provided  use propane/LP fuel tank of less than 100  with the fireplace. lbs. capacity
                    
                    Streszczenie treści zawartej na stronie nr. 5 
                    
                        ELECTRONIC IGNITOR pRoDUCT  (Remote-Ready Models Only) iDENTiFiCa TioN This heater has an electronic ignitor to light  heater fuel supply. opTioN al REMo TE  CoNTRol aCCEssoRiEs Brick  (For Remote-Ready Models Only) Liners  There are four optional remote controls that  can be purchased separately for Remote- Ready Models only: Screen  • wall switch • hand-held ON/OFF remote Log • wall thermostat • hand-held thermostat remote See Accessories, page 34. Control  assEMByl Knob Piezo  Ignitor  WARNIN
                    
                    Streszczenie treści zawartej na stronie nr. 6 
                    
                        assEMByl aiR FoR CoMBUsTioN  Continued aND VENTila TioN 4. Check installation of brick liners. Brick   WARNING: This fireplace  liners are in four pieces: 2 sides, 1 back  and 1 top. shall not be installed in a con- 5. Place hood under top edge of firebox fined space or unusually tight  opening. Use 3 screws from hardware kit  construction unless provisions  to mount hood to firebox (see Figure 3). are provided for adequate com- bustion and ventilation air. Read  the following instructions to in
                    
                    Streszczenie treści zawartej na stronie nr. 7 
                    
                        DETERMINING FRESH-AIR FLOW  aiR FoR CoMBUsTioN  FOR FIREPLACE LOCATION aND VENTila TioN Continued Determining if You Have a Confined or  Unconfined Space The air that leaks around doors and windows  Use this work sheet to determine if you have  may provide enough fresh air for combus- a confined or unconfined space. tion and ventilation. However, in buildings of  Space: Includes the room in which you will install  unusually tight construction, you must provide  fireplace plus any adjoining rooms
                    
                    Streszczenie treści zawartej na stronie nr. 8 
                    
                        aiR FoR CoMBUsTioN  aND VENTila TioN 12" Continued The space in the example is a confined space Ventilation Grills  Into Adjoining Room, Ventilation Option 2 because the actual Btu/Hr used is more than the  Grills Or  into Remove  maximum Btu/Hr the space can support. You  Adjoining Door into  Room, Adjoining  must provide additional fresh air. Your options Option 1 Room,  Option 3 are as follows: A. Rework worksheet, adding the space of an  adjoining room. If the extra space provides an  12" un
                    
                    Streszczenie treści zawartej na stronie nr. 9 
                    
                        IMPORTANT: Vent-free fireplaces add mois- iNsTalla TioN ture to the air. Although this is beneficial,  NOTICE: This heater is intended  installing fireplace in rooms without enough  ventilation air may cause mildew to form from  for use as supplemental heat.  too much moisture. See Air for Combustion  Use this heater along with your  and Ventilation, page 6. primary heating system. Do not  Note: Your fireplace is designed to be used in  install this heater as your pri- zero clearance installatio
                    
                    Streszczenie treści zawartej na stronie nr. 10 
                    
                        Minimum Clearances For Side Combustible  iNsTalla TioN Material, Side Wall and Ceiling Continued A. Clearances from the side of the fireplace  FIREPLACE CLEARANCES cabinet to any combustible material and  wall should follow diagram in Figure 6.  WARNING: Maintain the   Example: The face of a mantel, bookshelf,  minimum clearances shown etc. is made of combustible material and  1 protrudes 3 / " from the wall. This com- in Figure 6. If you can, provide 2 bustible material must be 4" from the side
                    
                    Streszczenie treści zawartej na stronie nr. 11 
                    
                        IMPORTANT: When finishing your firebox,  iNsTalla TioN combustible materials such as wall board,  Continued gypsum board, sheet rock, drywall, plywood,  etc. may be butted up next to the sides and  Actual Framing 3 1 top edge of the firebox. Combustible materials  Height 23 /4" 22 /4" 3 1 should never overlap the firebox front facing. Front Width 19 /4" 17 /2" 7 7 Depth 8 /8" 8 /8"  WARNING: Do not allow any  Bottom 0" 0" combustible or noncombustible  1. Frame in rough opening. Use dimensions  
                    
                    Streszczenie treści zawartej na stronie nr. 12 
                    
                        Pipe and Gas  Electrical  iNsTalla TioN Hearth  Shutoff Valve Outlet Continued Base Mantel Shelf 9" Note:  3" All vertical  measurements  1" are from top of  3/4" fireplace  opening to   Figure 10 - Placing Hearth Base Against Wall bottom of  mantel shelf. All  measurements  are in inches.  Cabinet  Mantel Side of Firebox Figure 9 - Minimum Mantel Clearances  Hearth  for Built-In Installation Base OPTIONAL MANTEL INSTALLATION Refer to instructions provided with the mantel  for assembly. Refer to
                    
                    Streszczenie treści zawartej na stronie nr. 13 
                    
                        External Regulator iNsTalla TioN Propane/LP  Continued Supply Tank CONNECTING TO GAS SUPPLY  WARNING: This appliance re- quires a 45° male flare fitting 5/8"- 18 UNF (Unified National Fine  Thread) inlet connection and the  flexible gas line provided.  WARNING: A qualified ser- Vent Pointing Down vice person must connect fire- Figure 13 - External Regulator With Vent  place to gas supply. Follow all Pointing Down local codes.  CAUTION: Use only new,  black iron or steel pipe. Inter-  WARNING: Ne
                    
                    Streszczenie treści zawartej na stronie nr. 14 
                    
                        1. Route flexible gas line, included, from  iNsTalla TioN fireplace control to equipment shutoff  Continued valve through side or rear access holes  We recommend that you install a sediment  in outer casing (see Figure 1, page 5). trap in supply line as shown in Figure 14. Lo- 2. Apply pipe joint sealant lightly to male  cate sediment trap where it is within reach for  threads of gas connector attached to  cleaning. Install in piping system between fuel  flexible gas line/equipment shutoff valve
                    
                    Streszczenie treści zawartej na stronie nr. 15 
                    
                        Test Pressures Equal To or Less Than   iNsTalla TioN 1/2 PSIG (3.5 kPa) Continued 1. Close equipment shutoff valve (see Fig- CHECKING GAS CONNECTIONS ure 16). 2. Pressurize supply piping system by either   WARNING: Test all gas piping  opening propane/LP supply tank valve  and connections, internal and for propane/LP gas or opening main gas  valve located on or near gas meter for  external to unit, for leaks after  natural gas or using compressed air. installing or servicing. Correct  3. Check a
                    
                    Streszczenie treści zawartej na stronie nr. 16 
                    
                        iNsTalla TioN Continued PRESSURE TESTING FIREPLACE GAS  CONNECTIONS 1. Open equipment shutoff valve (see Figure  16, page 15). 2. Open main gas valve located on or near  gas meter for natural gas or open pro- pane/LP supply tank valve. 3. Make sure control knob of fireplace is in  the OFF position. 4. Check all joints from equipment shutoff  valve to gas regulator (Manual-Controlled  Models) or to gas control valve (Remote- Ready Models) (see Figures 17 or 18,  page 15). Apply noncorrosive leak 
                    
                    Streszczenie treści zawartej na stronie nr. 17 
                    
                        8. Install the base onto the wall with the  iNsTalla TioN provided screws. Continued 9. Move the temperature adjustment back  OPTIONAL WALL MOUNTED  and forth to insure the bimetal is free from  THERMOSTAT - GWMT1  restrictions. (Remote-Ready Models Only) 10. Replace the cover onto the base. (Upon  installation, the thermostat must be al-  WARNING: Read and fol- lowed to stabilize at room temperature  for a minimum of 30 minutes for proper  low installation instructions.  operation). Installatio
                    
                    Streszczenie treści zawartej na stronie nr. 18 
                    
                        Shoulder Screw iNsTalla TioN Continued Log OPTIONAL WALL SWITCH - GWMS2  (Remote-Ready Models Only)  WARNING: Read and fol- low installation instructions.  Installation should be done by  a qualified installer familiar with  low-voltage wiring procedures. Screen  WARNING: Do not connect  Figure 22 - Installing Log and Screen this switch to any electrical  opERa TiNG FiREpla CE source! Electrical shock and/or  MaNUal-CoNTR ollED  fire hazard will occur. MoDEls 1. Connect one terminal of 25 ft. wi
                    
                    Streszczenie treści zawartej na stronie nr. 19 
                    
                        6. With control knob pressed in, press and  opERa TiNG FiREpla CE release ignitor button (see Figure 23).  Continued This will light pilot. The pilot is attached  D. Do not use this appliance if any part  to the front burner. If needed, keep press- has been under water. Immediately call  ing ignitor button until pilot lights. a qualified service technician to inspect   Note: If pilot does not stay lit, refer to  the appliance and to replace any part of  Troubleshooting, page 31. Also, con- the c
                    
                    Streszczenie treści zawartej na stronie nr. 20 
                    
                        C. Use only your hand to push in or turn  opERa TiNG FiREpla CE the gas control knob. Never use tools.  Continued If the knob will not push in or turn by  9. To turn off burner and leave pilot lit: hand, don’t try to repair it, call a quali- fied service technician or gas supplier.  Turn control knob clockwise  to  Force or attempted repair may result in  the PILOT position. a fire or explosion. TO TURN OFF GAS  D. Do not use this appliance if any part  TO APPLIANCE has been under water. Immedia