Streszczenie treści zawartej na stronie nr. 1
Model No. GGTL90608.0
Serial No.
USER'S MANUAL
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete cus-
tomer satisfaction. If you have
questions, or if parts are missing,
DO NOT CONTACT THE STORE;
please contact Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-877-776-4777
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . .
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, con- carrying 15 or more amps. No other appliance sult your physician. This is especially impor- should be on the same circuit. Do not use
Streszczenie treści zawartej na stronie nr. 4
20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. the power cord, and switch the reset/off cir- cuit breaker to the off position when the 25. DANGER: Always unplug the power treadmill is not in use. (See the drawing on cord immediately after use, before cleaning the page 5 for the location of the circuit breaker.) treadmill, and before performing the mainte- nance and adjustment proce
Streszczenie treści zawartej na stronie nr. 5
BEFORE YOU BEGIN Thank you for selecting the revolutionary GOLDʼS ual. To help us assist you, note the product model GYM MAXX™ COMPETITOR 1080 treadmill. The number and serial number before contacting us. The COMPETITOR 1080 treadmill offers an impressive model number and the location of the serial number array of features designed to make your workouts at decal are shown on the front cover of this manual. home more enjoyable and effective. And when youʼre not exercising, the unique treadmill ca
Streszczenie treści zawartej na stronie nr. 6
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-perfor- mance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal c
Streszczenie treści zawartej na stronie nr. 7
2. Remove the 3/8" Nut (8) and the 3/8" x 2" Bolt 2 (4) from the Base (83). Attach a Wheel (84) with Tie the Bolt and the Nut that you just removed. Do not overtighten the Nut; the Wheel must turn 38 freely. 83 Cut the tie off the Upright Wire (38). 4 84 8 3. Identify the Right Upright (78) and the Right 3 Upright Spacer (79), which are marked with 78 stickers. Insert the Upright Wire (38) through the Right Upright Spacer as shown. Set the Right Upright Spacer on the Base (83). 38 38 Have a seco
Streszczenie treści zawartej na stronie nr. 8
5. With the help of a second person, carefully tip 5 the treadmill onto its right side. Partially fold the Frame (56) so the treadmill is more stable; do 83 not fully fold the Frame yet. 81 56 2 Attach a Base Pad (81) to the Base (83) in the 4 location shown with a 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (81) with only a 1" Tek Screw (2). 13 Remove the 3/8" Nut (8) and the 3/8" x 2" Bolt (4) from the Base (83). Attach a Wheel (84) with 84 2 81 the Bolt and the
Streszczenie treści zawartej na stronie nr. 9
8. Insert the indicated connectors into the Right 8 Upright (78). 95 Next, insert the fronts of the brackets on the Bridge (95) into the Uprights (74, 78), and then fully insert the brackets. Make sure that the plastic edges of the Bridge are inside the Connectors Uprights. 7 10 Front Attach the Bridge (95) with six 1/4" x 1/2" Bolts 7 (7) and six 1/4" Star Washers (10); start all six Edge Bolts before tightening any of them. 7 See steps 4 and 6. Tighten the four 3/8" x 4 1/2" 74 Bolts (6). 10 7
Streszczenie treści zawartej na stronie nr. 10
11. Raise the Frame (56) to the position shown. 11 Have a second person hold the Frame until this step is completed. 56 Orient the Storage Latch (53) so that the large barrel and the Latch Knob (54) are oriented as shown. 8 4 53 Attach the Latch Bracket (109) and Storage Latch (53) to the Base (83) with two 3/8" x 2" Bolts (4) and two 3/8" Nuts (8). 54 Large Attach the upper end of the Storage Latch (53) Barrel to the bracket on the Frame (56) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Note:
Streszczenie treści zawartej na stronie nr. 11
If you purchase the optional chest pulse sensor (see page 19), follow the steps below to install the re- ceiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated 1/2" Screws (1) and the Access Door (87) from the Console Back (91). 2. Connect the wire on the receiver to the indicated 91 wire extending from the Console Back (91). Small Hold the receiver so that the small cylinder is Screws Receiver 87 oriented as shown and is facing the Conso
Streszczenie treści zawartej na stronie nr. 12
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding Your treadmill features a walking belt coated with high- plug. Plug the power cord into a surge suppressor, performance lubricant. IMPORTANT: Never apply sil- and plug the surge suppressor into an appropriate icone spray or other substances to the walking outlet that is properly installed and grounded in belt or the walking platform. Su
Streszczenie treści zawartej na stronie nr. 13
CONSOLE DIAGRAM Key Clip FEATURES OF THE CONSOLE To turn on the power, see page 14. To use the man- ual mode, see page 14. To use a personal trainer This revolutionary treadmill console offers a selection workout, see page 16. To use the iFIT Competition of features designed to make your workouts more ef- Training Center, see page 17. To use the settings fective and enjoyable. When you use the manual mode mode, see page 18. To use the information mode, of the console, you can change the speed an
Streszczenie treści zawartej na stronie nr. 14
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER to the left. do this, the console displays or other electrical components may become damaged. 2. Select the manual mode. Plug in the power cord Each time you insert the key, the manual mode will (see page 12). Next, lo- be selected. I
Streszczenie treści zawartej na stronie nr. 15
5. Follow your progress with the display. sensor (see page 19 for information about the op- tional chest pulse sensor). Note: If you hold the The console offers several display options. The dis- handgrip pulse sensor and wear the optional chest play option you select will determine which workout pulse sensor at the same time, the console will not information is shown. Press the Display button re- display your heart rate accurately. peatedly to select the desired display option. Before using the
Streszczenie treści zawartej na stronie nr. 16
HOW TO USE A PERSONAL TRAINER WORKOUT The program will continue in this way until the last segment of the profile flashes in the display and 1. Insert the key into the console. the last segment ends. The walking belt will then slow to a stop. See HOW TO TURN ON THE POWER on page 14. If the speed or incline setting for the current seg- ment is too high or too low, you can manually over- 2. Select a personal trainer workout. ride the setting by pressing the Speed and Incline buttons. Every few tim
Streszczenie treści zawartej na stronie nr. 17
HOW TO USE THE IFIT COMPETITION TRAINING information is shown. Press the Display button re- CENTER peatedly to select the desired display option. 1. Insert the key into the console. As you walk or run on the treadmill, the display can show the following workout information: See HOW TO TURN ON THE POWER on page 14. • An animation of a runner labeled “U,” which rep- resents you. As you increase or decrease the 2. Select the iFIT Competition Training Center. speed of the walking belt, the runner wi
Streszczenie treści zawartej na stronie nr. 18
• A profile of the incline settings of the race will ap- HOW TO USE THE SETTINGS MODE pear in the lower part of the screen. 1. Insert the key into the console. • A status bar showing the distance you have trav- elled in the race and the distance you still have to See HOW TO TURN ON THE POWER on page travel. 14. • Your average speed. 2. Select the settings mode. • The rate at which your opponents recover their To select the settings mode, press the Select energy (rec). Your row in the rec column
Streszczenie treści zawartej na stronie nr. 19
THE INFORMATION MODE THE OPTIONAL CHEST PULSE SENSOR The console features an information mode that allows An optional chest pulse sensor offers hands-free oper- you to select a unit of measurement for the console, ation as it tracks your heart rate during your workouts. turn on or turn off the display demo mode, and change To purchase the optional chest pulse sensor, call the contrast of the display. the telephone number on the front cover of this manual. To select the information mode, hold dow
Streszczenie treści zawartej na stronie nr. 20
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the
