Streszczenie treści zawartej na stronie nr. 1 
                    
                        OUTDOOR GRILLS
BUILT-IN INSULATED JACKET GRILLS
Installation Instructions and Use & Care Guide
For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230
or visit our website at www.kitchenaid.com
In Canada, for assistance, installation and service, call: 1-800-807-6777 
or visit our website at www.KitchenAid.ca
GRILS D'EXTÉRIEUR
GRILS ENCASTRÉS AVEC CHEMISAGE ISOLÉ
Instructions d’installation et Guide d’utilisation et d’entretien
Au Canada, pour ass
                    
                    Streszczenie treści zawartej na stronie nr. 2 
                    
                        TABLE OF CONTENTS TABLE DES MATIÈRES OUTDOOR GRILL SAFETY............................................................3 SÉCURITÉ DU GRIL D'EXTÉRIEUR ...........................................25 INSTALLATION REQUIREMENTS ................................................5 EXIGENCES D'INSTALLATION...................................................27 Tools and Parts ............................................................................5 Outillage et pièces.......................................
                    
                    Streszczenie treści zawartej na stronie nr. 3 
                    
                        OUTDOOR GRILL SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety  messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: You can be killed or seriously injured if you don't immediate
                    
                    Streszczenie treści zawartej na stronie nr. 4 
                    
                        IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electrical shock, ■  The LP gas supply cylinder to be used must be:  injury to persons, or damage when using the outdoor cooking  - constructed and marked in accordance with the  gas appliance, follow basic precautions, including the  Specification for LP Gas Cylinders of the U.S. Department  following: of Transportation (DOT) or the National Standard of  ■  Do not install portable or built-in outdoor cooking gas Canada, CAN/CSA-
                    
                    Streszczenie treści zawartej na stronie nr. 5 
                    
                        INSTALLATION REQUIREMENTS T ools and Parts Location Requirements Gather the required tools and parts before starting installation.  Read and follow the instructions provided with any tools listed  here. WARNING Tools Needed  ■ Tape measure ■ Wrench or pliers ■ Small, flat-blade screwdriver ■ Pipe wrench ■ Flat-blade screwdriver ■ Scissors or cutting pliers  (to remove tiedowns) ■ #2 and #3 Phillips screwdriver Explosion Hazard ■ Noncorrosive  ■ Level Do not store fuel tank in a garage or indoors
                    
                    Streszczenie treści zawartej na stronie nr. 6 
                    
                        NOTE: The grill drops into the opening and the bottom of the grill  should be supported by the bottom support of the cabinet  Product Dimensions cutout. A 2¼" 12" (30.5 cm) (5.7 cm) min to any  38" accessory (96.5 cm) 3" (7.6 cm) Bottom  7 ³⁄₈" min to support (18.7 cm) open hood 11 ¾" (29.6 cm) 25⁵⁄₈" Gas line 12" (30.5 cm) (65.0 cm) location at 1¹⁄₂" min to any  rear of grill (3.8 cm) accessory 24" 11¾" (61.0 cm) (29.8 cm) 20 ⁵⁄₈" C (52.5 cm) B 36½" 2 ⁵⁄₈" (92.7 cm) (6.8 cm) 27¾" 20 ⁷⁄₈" (70.5 
                    
                    Streszczenie treści zawartej na stronie nr. 7 
                    
                        A 120-volt, 60-Hz, AC-only, 15-amp, fused electrical supply is  Built-in Outdoor Grill Enclosure Ventilation for LP Gas: required. An enclosure for an LP gas fuel tank is to be ventilated by  openings at both the top and lower levels of the enclosure. It is recommended that a separate circuit servicing only this grill  be provided. If converting to LP gas these vents are to be in the enclosure: The model/serial number rating plate is located on the right-hand  An enclosure for use with an LP gas
                    
                    Streszczenie treści zawartej na stronie nr. 8 
                    
                        Burner Requirements for High Altitude Gas Supply Requirements Input ratings shown on the model/serial rating plate are for  elevations up to 2,000 ft (609.6 m). WARNING For elevations above 2,000 ft (609.6 m), ratings are reduced at a  rate of 4% for each 1,000 ft (304.8 m) above sea level. Orifice  conversion is required for elevations above 2,000 ft (609.6 m).  See “Assistance or Service” section to order High Altitude  Conversion Kit. Gas Supply Line Pressure Testing Explosion Hazard Testing 
                    
                    Streszczenie treści zawartej na stronie nr. 9 
                    
                        Do not block access to the shutoff valve. The valve is for turning To convert to LP gas, the LP Gas Conversion Kit Part Number  on or shutting off gas to the grill. W10118099 must be used. Follow instructions included with kit. B A A B C A. Gas supply line B. Shutoff valve “open” position C. To grill C D LP Gas Conversion Using a Local LP Gas Supply A. Grill gas pipe Conversion must be made by a qualified person. The installation B. New CSA International approved  “outdoor” flexible gas supply l
                    
                    Streszczenie treści zawartej na stronie nr. 10 
                    
                        6. On some models, install rotisserie mounting bracket using ■ If local codes permit, use an outdoor flexible stainless  steel tubing gas connector, design-certified by CSA  2 screws. International, to connect the grill to the rigid gas supply  line. A ⁵⁄₈" diameter line is recommended. Using a wrench  to tighten, connect the gas supply to the grill. Use pipe- joint compound on all non-flared male threads. Do not  kink or damage the flexible connector when moving the  grill. ■ Pipe-joint compoun
                    
                    Streszczenie treści zawartej na stronie nr. 11 
                    
                        To Install the 20 lb LP Gas Fuel Tank: 1. Install the 20 lb LP gas fuel tank tray according to the  WARNING instructions provided with the LP Gas Conversion Kit, Part  Number W10118099. 2. Place the 20 lb LP gas fuel tank bottom collar into the  mounting hole in the LP tank tray. 3. Tighten the locking screw against the bottom collar of the  20 lb LP gas fuel tank to secure. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. C Do not use an adapter. Do not u
                    
                    Streszczenie treści zawartej na stronie nr. 12 
                    
                        Check and Adjust the Burners The burners are tested and factory-set for most efficient 6. If flame is yellow (not enough air), turn air shutter adjustment  operation. However, variations in gas supply and other conditions screw counterclockwise. may make minor adjustments to air shutter or low flame setting  If flame is noisy or lifts away from burner (too much air), turn  necessary. air shutter adjustment screw clockwise. It is recommended that a qualified person make burner  adjustments. NOTE:
                    
                    Streszczenie treści zawartej na stronie nr. 13 
                    
                        OUTDOOR GRILL USE This manual covers several different models. The grill you have purchased may have some or all of the features listed. The locations and  appearances of the features shown here may not match those of your model. Control Panel A B C D E F H I G LIGHTS A. Left rotisserie burner control knob F. Sear burner control knob B. Left grill burner control knob G. Right rotisserie burner control knob C. Center grill burner control knob H. Front side burner control knob D. Right grill burne
                    
                    Streszczenie treści zawartej na stronie nr. 14 
                    
                        4. Guide the lit match between the grill grate and one of the  Turn the Gas Supply On slots in the sear plate. 1. For outdoor grills using gas supply source other than 20 lb LP  gas fuel tank:  Open the manual shutoff valve in the gas supply line. The  valve is open when the handle is parallel to the gas pipe. A B  5. Push in and turn the burner knob to LITE/HI for the burner  closest to the lit match. The burner will light immediately.  A. Closed valve When burner is lit, turn knob to desired s
                    
                    Streszczenie treści zawartej na stronie nr. 15 
                    
                        Using Your Rotisserie WARNING C D A Electrical Shock Hazard Plug into a grounded 3 prong outlet. B Do not remove ground prong. Do not use an adapter. A. Rotisserie motor B. Spit rod Do not use an extension cord. C. Rotisserie fork Failure to follow these instructions can result in death,  D. Rotisserie burner fire, or electrical shock. For best cooking results, do not use main grill burners when  using the rotisserie. 8. Plug into a grounded 3 prong outlet. The rotisserie system is designed to c
                    
                    Streszczenie treści zawartej na stronie nr. 16 
                    
                        4. Gently hold the lit match close to the rotisserie burner. Trussing Poultry for the Rotisserie 1. Load the spit rod by sliding one of the forks on the rod, with  the prongs facing inward. Tighten the screw to keep it from  A slipping. B 2. Push the rod through the center of the bird. 3. Cut 24" (61 cm) of butcher’s string and center it under the  bird, breast side up. 4. Wrap each end of the string around the wings; catch each  wing tip. Bring the string tightly together at the top of the  bre
                    
                    Streszczenie treści zawartej na stronie nr. 17 
                    
                        Using Your Smoker Box TIPS FOR OUTDOOR  (on some models and as an accessory)* The smoker box can be used when grilling or when using your  GRILLING  rotisserie. 1. Prepare wood chips/pellets following manufacturer’s  directions. WARNING 2. Open smoker box lid and add prepared chips/pellets onto the  Food Poisoning Hazard grate inside the smoker box. NOTE: For about 1 hour of smoking, fill the smoker box Do not let food sit for more than one hour before or  approximately one-fourth full of chips/
                    
                    Streszczenie treści zawartej na stronie nr. 18 
                    
                        Cooking Methods For optimal use of the SureSear™ system, the following cooking Cooking by indirect heat means the food is placed on the grill  methods are recommended. grate above an unheated burner, allowing heat from lighted  burner(s) on either side to cook the food. Direct Heat If possible, turn on 2 burners. Cook with the hood down. This will  Cooking by direct heat means the food is placed on grill grates  shorten the cooking time. directly above lighted burners. Hood position can be up or
                    
                    Streszczenie treści zawartej na stronie nr. 19 
                    
                        FOOD COOKING METHOD/ INTERNAL TEMP. TIME SPECIAL INSTRUCTIONS BURNER SETTING (total minutes) Chicken Breast, boneless DIRECT 170°F/77°C 15-22 For even cooking, pound breast  Medium to ¾" (2.0 cm) thick. Pieces, 2-3 lbs (0.75- DIRECT Breast 170°F/77°C Start bone side down. 1.1 kg) Med-Low to Medium Thigh 180°F/82°C Lamb Chops and Steaks,  Loin, Rib, Sirloin, 1" (2.5 cm) thick DIRECT Med-rare (145°F/63°C) 10-20 Medium to Medium (160°F/71°C) 1½" (3.8 cm) thick DIRECT Med-rare (145°F/63°C) 16-20 Med
                    
                    Streszczenie treści zawartej na stronie nr. 20 
                    
                        OUTDOOR GRILL CARE GRILL GRATES Changing the Light Bulb 1. Unplug grill or disconnect power. IMPORTANT: To avoid damage to grill grates, do not use a steel  2. To remove glass light cover, remove screw and gently pry or fiber scraper. Immediately after you are finished cooking,  downward with a small flat-blade screwdriver at the left side loosen food soil with a brass bristle brush. Turn all burners to HI  of the cover, and pull away from the retainers. for 10-15 minutes with the hood closed to