Resumo do conteúdo contido na página número 1
AdvanceCAM
IntraOral Camera
Operation And
Installation Manual
Resumo do conteúdo contido na página número 2
Advance Video Remote Control: Full / Quad Button: Choose to capture image in full screen or capture 4 images (quad). F/M: Press button to capture image on monitor Delete Button: Press shaded quad (1,2,3 or 4) to “delete” image from that specific quad. Press “Freeze Button” to re- capture image for specific quad. Zoom Button: Press shaded quad (1,2,3 or 4) to “zoom” image from that specific quad. Press again to return to normal size. Delete Single Image: This function will delete t
Resumo do conteúdo contido na página número 3
Docking Station AIC815 Full / Quad Button: Push button to capture image(s) in full screen or 4 images (quad). Choice Button: Press the choice button to highlight image 1 2 3 or 4 when in quad mode. The number will turn green. This function only works in quad mode. Zoom Button: Use choice to select then press zoom while the number is highlighted green, this will zoom in on selected image. Press again to return to normal size. Freeze Button: Press to capture image. Press to return to liv
Resumo do conteúdo contido na página número 4
Advance Cam Press “Freeze button” to freeze image. Press “Freeze button” again to copy image into memory. There is also an additional button on the wand that will allow you to change from “full” to “quad”. Press this button once and it will put you in “quad” mode. Press a second time and the camera will go back to a “full” screen mode. While in “quad” mode you must depress the capture button only four times to freeze all images if you press the button a fifth time the image will be cop
Resumo do conteúdo contido na página número 5
AdvanceCAM Intraoral Camera Installation Instructions AIC 850 Turn power to transmitter on and off. Connect Camera wand Light will emit from cable to wireless end of camera when transmitter if you power is on. desire wireless operation. AIC 900 Turn power to Connect camera transmitter on and off. transmitter to the Light will emit from back of the end of camera when camera. power is on. AIC810 Connect camera wand cable to docking station if you d
Resumo do conteúdo contido na página número 6
1. Prior to using the TPC-WIC 850, AIC900 charge the Wireless Video Module TX until the power supplies LED turns back to green. It will be red while the unit is charging. After the charging period is over, it is recommended that the power charger be removed from the transmitter. 2. Disconnect power supply from Wireless Video Module TX “DC In” port. 3. Connect EZ Cam cord to Wireless Video Module TX “Cam” port. AIC850 AIC888
Resumo do conteúdo contido na página número 7
AIC810 4. Plug adv20 “switching power adapter” into Docking Station ADV-20 /AIC815 “DC 5VIN” port. Plug power supply into wall outlet. AIC810 5. Plug RCA jack or S-Video into Docking Station ADV- 20 “AV Out” or “YC Out” port. Connect other end of video cable into Video Input port on monitoring device (pc or TV). Note you only need to use one video output S-video Or RCA. AIC815 6. Plug RCA jack or S-Video into Docking Station AIC 815 “AV Out” or “S0video out” por
Resumo do conteúdo contido na página número 8
Notes: Cameras that start with PA or NT, you will need to press the freeze button to activate the camera’s LED’s. This will turn the camera on. Then you will be able to see an image from the camera. Docking Station Settings: AIC800,805,810,815 • Switches 1-4 are to select the docking station’s channels. Only one can be set to the on position. They must correspond to the transmitter’s setting. • The P and N are to select which system is being used. P is
Resumo do conteúdo contido na página número 9
Troubleshooting Guide The remote to my camera does not work. 1. Point the remote towards the lens of the camera, press any button and hold on the remote. You should see light flickering on the monitor. You must use the camera to see this because the human eye cannot detect this light. 2. If there is no light try changing the battery in the remote. 3. If problem persists call your local dealer. There is no light coming from the end of my camera. 1. Check to
