Resumo do conteúdo contido na página número 1
DAY & NIGHT COLOR CCD CAMERA
INSTRUCTION MANUAL
-
SDN 520N/P
-
SDN 510N/P
SALES NETWORK
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
SAMSUNG TECHWIN CO., LTD
Optics & Digital Imaging Division Closed Circuit Division
145 -3, Sangdaewon 1-Dong, Jungwon-Gu, 40 Seaview Drive, Secaucus N.J
07094, U.S.A.
Sungnam, Kyungki-Do, Korea
462-121
TEL : (201) 902-0347
TEL :82 -31-740 - 8137~41
FAX : (201) 902-9342
SAMSUNG CCD CAMERA
FAX :82 -31-740 - 8145
P/NO.:6806-0366-01A
Printed in Korea
www.samsungcctv.com
Resumo do conteúdo contido na página número 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamatio
Resumo do conteúdo contido na página número 3
Resumo do conteúdo contido na página número 4
Resumo do conteúdo contido na página número 5
Resumo do conteúdo contido na página número 6
G GE ET TT TIIN NG G T TO O K KN NO OW W Y YO OU UR R C CA AM ME ER RA A Tripod Mounting Hole Bottom Front Used to install the camera on an optional tripod. The tripod must be equipped with C Mount Adapter. the screw specified as shown below. Attach the C-Mount Adapter when using the 1/4"-20 UNC (20 THREAD) C-Mount Lens. L L:4.5mm±0.2mm (ISO standard), Tripod Mounting Bracket Screw Hole. or 0.197" (ASA standard) Used to fix the Tripod mounting bracket on the top of the camera. Auto Iris Len
Resumo do conteúdo contido na página número 7
G GE ET TT TIIN NG G T TO O K KN NO OW W Y YO OU UR R C CA AM ME ER RA A G GE ET TT TIIN NG G T TO O K KN NO OW W Y YO OU UR R C CA AM ME ER RA A Back Accessories REMOTE Jack Used to connect a remote plug. Auto Iris Lens Plug This jack also provides the motion detect signal. DC/VIDEO Selection Switch Remote Plug Used to choose DC or VIDEO Video Out Jack according to the type of your auto iris lens. Used to connect an external video monitor in jack. L-Wrench Menu Setup Buttons SET Button Used t
Resumo do conteúdo contido na página número 8
C CO ON NN NE EC CT TIIO ON N 3. Remove the cover from the iris lens plug supplied, and solder the lens cable to the plug as shown below. • Video type : • DC type : Lens No. 1 Pin --- Red (Power source) No. 1 Pin --- Damping - No. 2 Pin --- N.C No. 2 Pin --- Damping + The lens is not supplied with this camera. Purchase a lens No. 3 Pin --- White (Video signal) No. 3 Pin --- Drive + suitable for your environment. This camera accepts the auto No. 4 Pin --- Black (GND) No. 4 Pin --- Drive
Resumo do conteúdo contido na página número 9
Resumo do conteúdo contido na página número 10
Resumo do conteúdo contido na página número 11
C CO ON NF FIIG GU UR RA AT TIIO ON N O OF F M ME EN NU U Setup Menu Gain Control (see page 34) Camera ID (see page 23) • ON : Activate. You can enter up to 14 • AGC (Auto Gain Control) : Activates AGC feature. alphanumeric characters and select • OFF : Deactivate AGC feature. the ID position. White Balance Control (see page 35) • OFF : Deactivate • ATW (Auto Tracing White balance) : Automatically Backlight (see page 26) controls white balance. • AWC (Auto White balance Control) : Automatica
Resumo do conteúdo contido na página número 12
S SE ET TU UP P M ME EN NU U 2. Select the desired feature using the UP or DOWN button. Use the five Setup Menu buttons on the rear of the camera. Each time you press the UP or DOWN button, the arrow indicator moves up or down. Move the arrow indicator to the desired feature item. Setup Select the function Camera ID OFF Change the status Backlight OFF using the UP or using the LEFT or Motion Detect. OFF DOWN button.Lens DC RIGHT button. Shutter ESC UP button Gain AGC White Balance ATW LEFT but
Resumo do conteúdo contido na página número 13
Resumo do conteúdo contido na página número 14
S SE ET TU UP P M ME EN NU U S SE ET TU UP P M ME EN NU U Backlight Motion Detection The Wide Dynamic Range and Super BLC technology in Your camera transmits an alert signal when it detects your camera provides intelligent light level control to motion of an object on the screen. If you connect the camera overcome the severe Backlight conditions. to an external alarm, you can pay attention to the screen when the alarm sounds. This feature is useful when you 1. Press the SET button to display th
Resumo do conteúdo contido na página número 15
S SE ET TU UP P M ME EN NU U S SE ET TU UP P M ME EN NU U How to Assign the Zone 4. Specify the zone area. If you assign a zone, an alert signal occurs when the camera detects motion of objects in that zone. You can point to the top, bottom, left, and right base lines by setting a proper value from 0 to 15 with an increment of 1. Top base line Ex. Zone Ex. Full screen Top 2 Bottom 12 Left 0 Right 7 Left base line Right base line 5. Adjust Sensitivity. Move the arrow indicator to 'Sensitiv
Resumo do conteúdo contido na página número 16
Resumo do conteúdo contido na página número 17
S SE ET TU UP P M ME EN NU U S SE ET TU UP P M ME EN NU U 3. If you choose “DC”, you can adjust the brightness. 3. If you choose 'Manual', select the optimal shutter speed. After pressing the SET button, adjust the brightness of the monitor You can select speed from '1/60' to '1/10,000' sec (NTSC screen using the LEFT or RIGHT button. Models), / '1/50' to '1/10,000' sec (PAL Models). The screen becomes darker when the value is decreased and When the shutter speed is increased or decreased usi
Resumo do conteúdo contido na página número 18
Resumo do conteúdo contido na página número 19
S SE ET TU UP P M ME EN NU U S SE ET TU UP P M ME EN NU U Synchronization Mode Color ( Day & Night) Your camera provides automatic mode changeover by sensing day Two synchronization modes are available Internal and or night conditions. It changes to Color mode in day conditions for External linelock. -In linelock mode, it synchronizes the video optimal color and to BW mode in night conditions for clear signal between cameras without a synchronous generator. identification. The linelock synchron
Resumo do conteúdo contido na página número 20
S SE ET TU UP P M ME EN NU U The phase is preset to 225 degrees at the factory. You can re- If you connect a remote plug to the REMOTE jack on the adjust it from 0 to 270 degrees. rear of the camera as shown below, you can access the menu setup mode from a remote place. Line Lock Phase 225 Press SET to Return Tx (Transmit Data) NOTE GND When the power frequency is 50Hz, you can not use linelock Rx (Receive Data) MD (Motion Detection Signal) mode(NTSC Models). When the power frequency is 60Hz, y
