Resumo do conteúdo contido na página número 1
DGP2-648BL
DGP2-641BL / DGP2-641RB DGP2-640
User Guide for the
EVO96
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
Table of Contents Panic Alarms ..................................................................... 22 Introduction ...................................................................... 1 Quick Function Buttons ..................................................... 23 Legend................................................................................. 1 Testing and Maintenance............................................... 24 Basic Operation...................................................
Resumo do conteúdo contido na página número 4
1.0 Introduction Your EVO96 System is an advanced technology security system that will provide you with reliable security protection and powerful features that are easy to use. The elegant and user-friendly keypads will allow you easy access to your security system's functions and information at the touch of a button. Depending on which keypad you have selected, the 32-character LCD screen will display messages and menus to guide you through the system’s operations on the DGP2-641BL/RB keypad
Resumo do conteúdo contido na página número 5
2.0 Basic Operation The following sections will introduce you to the roles of the buttons, lights, and messages on your keypad. Figure 1: DGP2-641BL/RB Basic Overview AC Light: The LCD screen will guide you with detailed messages. ON = AC power OFF = Power failure STATUS Light: When Green: Use the arrow buttons to scroll ON = All zones are closed. through the current menu when the OFF = One or more zones are open. arrows appear in the LCD screen. FLASH = Exit Delay in progress When Red: ON =
Resumo do conteúdo contido na página número 6
2.2 Visual Feedback ICON The icons on the keypad’s screen communicate your system’s status as outlined in Table 1. Table 1: Icon Display and Functionality Icon(s) Display and Functionality Indicates numbers corresponding to zones and option numbers. If a zone or zones are open, their corresponding number(s) will appear. Indicates which areas are Force armed. Refer to Force Arming on page 6. Indicates which areas are Regular armed. Refer to Arming on page 6. Indicates which areas are Instant
Resumo do conteúdo contido na página número 7
For all keypads, the [ENTER] or [] key will save and exit, and the [CLEAR] or [] key will exit without saving. [ENTER] and [CLEAR] represent both the Icon’s enter and clear keys and the LCD/LED keypads’ enter and clear keys unless both keys are shown to have a different function. 2.3 Confidential Mode LCD ICON LED Your installer can program keypads to not display the status of your system automatically by changing the keypad to Confidential Mode. In Confidential Mode: • The zones, status me
Resumo do conteúdo contido na página número 8
3.0 Partitioned System Your installer can set your keypad to recognize separate protected areas. A separated system is called a partitioned system, which can be useful in situations where shared security systems are more practical. For example, a company that has both an office and a warehouse area, can arm and disarm each area separately while controlling access to each area. Therefore, one person may have access to only one area, whereas another person may have access to all areas. Access t
Resumo do conteúdo contido na página número 9
4.0 Arming When your system is armed, it can respond to any breach in the protected zones by causing an alarm and sending a report to your monitoring station. 4.1 Exit Delay Timer LCD ICON LED When you arm your system, it will trigger the Exit Delay Timer to provide you with enough time to exit the protected area before the system is armed. The light and the appropriate arm icon will both flash during the exit delay on the DGP2-640 keypad. (Refer to Table 1 on page 3) 4.2 Regular Arming LCD
Resumo do conteúdo contido na página número 10
4.6 Bypass Programming LCD ICON LED You can bypass certain zones when you arm the protected area(s). When a zone is bypassed, it will be ignored the next time your system is armed. Once your area is disarmed, the system will unbypass the zone. To Bypass a zone: 1. Enter your [ACCESS CODE]. 2. Press the [BYP] button or the [] key. 3. Enter the zone number (i.e. 01, 02,...96), or use the [ ] and [ ] buttons and press [BYP] or [] once the zone you want to bypass appears on the screen. If by
Resumo do conteúdo contido na página número 11
4.9 Auto-Arming LCD ICON LED If enabled by your installer, you can set the time that an area will arm itself automatically. 4.9.1 Timed Auto-Arming Your installer can set Timed Auto-Arming to function in either Force or Stay arming mode. A sixty-second (default value) Exit Delay sequence will begin prior to your system automatically arming itself at the programmed time. To set the Auto-Arming timer: 1. Enter your [ACCESS CODE]. 2. Press the [0] button. 3. Press the [MEM] button or the [] key
Resumo do conteúdo contido na página número 12
5.0 Disarming When your system is disarmed, it deactivates any alarms in progress, and it deactivates the zones so the alarm will not be triggered if zones are breached. 5.1 Entry Delay Timer LCD ICON LED Your installer will program designated entry points (i.e. the front door) with an Entry Delay Timer. This delay gives you time to enter the armed premises and enter your code to disarm your system before the alarm is triggered. 5.2 Disarming an Armed System LCD ICON LED You can only disarm
Resumo do conteúdo contido na página número 13
6.0 Access Codes Access Codes allow access to the system. Your system supports up to 999 user access codes. Codes are given a User Number between 002 and 999 (User Number 001 is the System Master Code). Your installer will program user access codes to be four, six, or variables of one to six digits in length. Each digit can be any value between zero and nine. If your installer programmed your system to accept a variable code length, you have to press the [ENTER] button after entering your use
Resumo do conteúdo contido na página número 14
6. Enter a user code. If the user code is of variable length, press the [ENTER] button after entering the user code. If necessary, assign an Access card (step 13 in section 6.6.1 on page 13) and User Label (section 6.4 on page 11). 7. Press [ENTER] to save and exit. 6.4 User Labels LCD User labels personalize user access codes and can be assigned by pressing [ENTER] at any point after step 4 during the programming of user access codes (refer to section 6.6.1 on page 13). For Example, the DGP
Resumo do conteúdo contido na página número 15
[DISARM] = Numeric Keys / Alphanumeric Keys Every time the [DISARM] key is pressed it will toggle from numeric keys to alphanumeric keys and vice versa. Numeric: Keys [0] to [9] represent numbers 0 to 9. [BYP] = Lower Case / Upper Case Every time the [BYP] key is pressed it will toggle the case setting from lower to upper case and vice versa. [MEM] = Special Characters After pressing the [MEM] key, the cursor will turn into a flashing black square. Using Table 5 on page 12, enter the 3-di
Resumo do conteúdo contido na página número 16
If the keypad emits a rejection beep at any point during the programming procedure, you may have chosen an existing user code or you do not have access to certain User Options (section 6.7) and Area Assignments (step 7 in section 6.6.1 on page 13). Users with the Master feature can only assign User Options and Area Assignments that they are assigned to. For example, if a User with the Master feature is assigned User Option 1 and Area 2, they can only assign Options 1 and Area 2 to a user ac
Resumo do conteúdo contido na página número 17
Option [1]: Access Control Option [2]: Can Disarm with Access Card Option [3]: Extended Unlocked Period Options [4] and [5]: Arming with Card [4] ON, [5] OFF:Regular Arm [4] OFF, [5] ON:Stay Arm [4] and [5] ON:Force Arm [4] and [5] OFF:Disable the Arming with Card feature Option [6]:Add Tolerance Window to Schedule Option [7]:Code Follows Schedule Option [8]:Card to Unlock and Code to Disarm 13.Enter the Access Control card’s serial number within the brackets. 14.Press the [ENTER] button to save
Resumo do conteúdo contido na página número 18
Option [4]: Bypass When option [4] is ON, the Bypass feature is enabled. This feature allows the user to deactivate zones when arming the area(s). Option [5]: Arm Only When option [5] is ON, the Arm Only feature is enabled. The user can arm assigned areas with either a card or code, but cannot disarm. When the option is OFF, the user can either arm or disarm assigned areas. Option [6]: Stay & Instant Arm When option [6] is ON, the Stay and Instant arm features are enabled. The user can now
Resumo do conteúdo contido na página número 19
Option [6]: Add Tolerance Window to Schedule When option [6] is ON, the Schedule Tolerance Window feature is enabled. This feature extends a user’s scheduled access period through an Access Control door by the amount programmed by your installer. For example, if the user’s assigned schedule for the door is Monday to Friday from 9:00 a.m. to 5:00 p.m., and your installer sets the “Tolerance Window” at one hour, the user with the “Schedule Tolerance Window” enabled will be able to enter and e
Resumo do conteúdo contido na página número 20
7.0 Using Access Control 7.1 Entering & Exiting LCD ICON LED Depending on how your system is installed and on the type of keypad, there are various ways to enter and exit Access Control doors: • Present your Access Control card to the reader or the DGP2-641RB keypad. The system will verify that the card is allowed access according to its assigned Access Level and Schedule. If it is accepted, the system will unlock the door. The reader’s light can be programmed by the installer to turn gree
