Manual do usuário Gianni Industries DG-600H

Resumo do conteúdo contido na página número 1

70
1
2 3
4 5 6
8 9
7
0 #
*
DG-600H
Stand-alone Proximity Reader
Unit: mm
Specifications
Operating Voltage: DC +9V to 16V
Features
Current Draw: Average 50mA, Peak 100mA @ 12Vdc
Allows up to 600 proximity cards and PIN codes
Transmitting Frequency: 125 KHz, 26~37-bit format (Host)
125 KHz Frequency 26~37-bit format Memory Volume: 600 Proximity cards/tokens and PIN codes
Read Range: Up to 10 cm (Depending on local installation
Tamper switch and alarm buzzer included
conditions)
Fully Programmable

Resumo do conteúdo contido na página número 2

DG-600H Stand-alone Proximity Reader Auxiliary reader The auxiliary reader must not be further than 50 meters from the DG-600H. Also this reader should be nearer than 60 centimeters, to avoid disturbance. The suggested wire gauge is #22~26 AWG. Split of units for DG-600H and auxiliary reader in ranging up to 50 M bring out the friendly system device for low cost but high security with anti-tampering as well as convenience and reliability. GEMPROX-H 125 KHz,Wiegand 26~37-bit format output Size:88