Resumo do conteúdo contido na página número 1
CONSUMER SERVICES TECHNICAL
KD-12
EDUCATION GROUP PRESENTS
POINT VOYAGER DISHWASHER
MODEL NUMBERS:
GU1200XT
GU1500XT
JOB AID
Part No. 8178022
I
Resumo do conteúdo contido na página número 2
INTRODUCTION This Job Aid, POINT VOYAGER DISHWASHER, Part No. 8178022 provides specific information on the operation, diagnosis and repair of the Whirlpool Point Voyager series Undercounter Dishwasher. POINT VOYAGER DISHWASHER has been compiled to provide the most recent information on de- sign, features, operation, troubleshooting, and repair procedures. GOALS AND OBJECTIVES The goal of this Job Aid is to provide detailed information that will enable the service technician to properly diagnose
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS MODEL/SERIAL NUMBER DESIGNATOR MODEL/SERIAL NUMBER DESIGNATOR MODEL/SERIAL NUMBER DESIGNATOR MODEL/SERIAL NUMBER DESIGNATOR MODEL/SERIAL NUMBER DESIGNATOR .......................... .......................... .......................... .......................... ..........................iv iv iv iv iv Section One INSTALLATION CONSIDERATIONS INSTALLATION CONSIDERATIONS INSTALLATION CONSIDERATIONS .............................. .............................. ....................
Resumo do conteúdo contido na página número 4
MODEL/SERIAL NUMBER PLATE SERIAL NUMBER DESIGNATOR Model/Serial Number Plate SERIAL NUMBER F L 36 50001 (Left side of MANUFACTURING SITE frame behind door) F = Findlay, OH YEAR OF MANUFACTURE L = 2001 WEEK OF MANUFACTURE PRODUCT SEQUENCE NUMBER MODEL NUMBER DESIGNATOR MODEL NUMBER G 1500 XT K U B 0 Product Group G = Gold Series Dishwasher Product Identification U = Undercounter Series Code 800 = Baseline and Contract Models 900 = Midline and Retail Derivatives 1000 = Voyager Platform Feature Cod
Resumo do conteúdo contido na página número 5
SECTION ONE INSTALLATION CONSIDERATIONS GENERAL CONSIDERATIONS For complete installation procedures see the “Installation Instructions” in the literature packet provided with the dishwasher. A video presentation, Key Features and Installation Considerations, part number 4317280V, is available. This video covers the entire installation process. Each location will present a different set of challenges that can be anticipated and solved before instal- lation begins. • Check the planned location of
Resumo do conteúdo contido na página número 6
SPECIFICATIONS ELECTRICAL SUPPLY: (Under Load) 60Hz, 120VAC SUPPLY WATER FLOW RATE: (To Fill 2 Quarts (1.9 L) in 27 secs.) - 120psi Max., 20psi Min. SUPPLY WATER TEMPERATURE: 120° F to 160° F (49° C to 71° C) WATER CHARGE: 1.8 Gal. (6.8 L) / First Fill 1.7 Gal. (6.5 L) / All Other Fills LOWER SPRAY ARM ROTATION: 25 TO 40 RPM UPPER SPRAY ARM ROTATION: 25 TO 35 RPM APF DRAIN: .1 Gal. (.38 L) HEATING ELEMENT HEATING RATE: 1°+ F Rise per Minute 2
Resumo do conteúdo contido na página número 7
SECTION TWO THEORY OF OPERATION CONTROL PANEL MODEL: GU1200XTK CYCLES 24 8 CYCLE SELECTION CHART Select the wash cycle and options desired. Upon selecting the cycle key, the cycle will begin imme- diately. Cycles may be changed at any time, dur- ing the first fill. Options can be selected or changed at any time. High NOTE: The last options used will be recalled from º Low 130 F memory automatically upon selecting a cycle, (if (54ºC) the option is valid with the cycle selec
Resumo do conteúdo contido na página número 8
Canceling a Cycle Anytime during a cycle, press The dishwasher starts a two minute drain (if needed.) Let the dishwasher drain completely. The light turns off after two minutes. To Stop the Drain NOTE: The Soil Sensor monitors water pres- Press CANCEL/DRAIN a second time to stop the sure at the output of the drain pump. Cycle time drain immediately. Always drain the dishwasher and/or water usage can vary from the numbers before starting a new cycle. above as the sensor adjusts the cycle for
Resumo do conteúdo contido na página número 9
ADDING ITEMS DURING A CYCLE Items can be added any time before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, add items. To Add Items: 1. Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door. 2. Open the door. If the detergent dispenser cover is still closed, add the item(s). 3. Close the door firmly until it latches. The dishwasher resumes the cycle after a five (5) second pause. OPTION
Resumo do conteúdo contido na página número 10
Control lock Use the Control Lock to prevent the dishwasher from accidentally being turned on. Use the ControlLock, also, to prevent accidental cycle or option changes during a cycle. When the Lock LED is lit, all buttons are disabled. NOTES: • The dishwasher door can be opened while the controls are locked. • The lock can be turned on while the dishwasher is running. To Turn on the Control Lock: Press and hold Air Dry for four (4) seconds. The LOCK LED will glow. To Turn off the Lock: Press
Resumo do conteúdo contido na página número 11
Sensing/Soaking The dishwasher senses the soil level on the dishes. Soil level determines the length of some cycles, the amount of heat added to the wash and the number of rinses needed in the cycle for the load. It also senses the temperature of the water during thermal hold water heating periods. SENSING/SOAKING glows during the soil sensing and thermal hold portions of the cycle. Wash action continues while sensing occurs. SENSING/SOAKING also glows during “soaking” events and the 4-hour
Resumo do conteúdo contido na página número 12
Rinse High High Low Purge Low Rinse High Low High º Low 130 F (54ºC) 8
Resumo do conteúdo contido na página número 13
FUNCTION DESCRIPTION The washing action of the Point Voyager Dishwasher performs more work and maintains higher per- formance with reduced energy consumption. This is accomplished with the following: 1) A redesigned wash system using separate wash and drain pumps. 2) A soil sensor and thermistor which monitor washing conditions. 3) An electronic control board which adjusts cycle functions to optimize washing performance. 8 10 11 6a 7 2a 7 2b 4 2c 6b 3 5 11 Wash/Rinse Function (6a) The remai
Resumo do conteúdo contido na página número 14
Drain Function 1. During the Drain function, a separate drain pump motor is started while the main wash pump motor continues to operate for 1 minute. (1) This accomplishes three goals. 2. First, the jets on the underside of the lower spray arm continue to flush soils from the accumu- lator screen while the water is drained from the unit. (2) 3. Second, negative pressure in the main wash pump inlet chamber keeps the check valve closed, allowing the drain pump to remove soiled water from the accu
Resumo do conteúdo contido na página número 15
Automatic Purge Filtration 1. The Automatic Purge Filtration feature may be invoked if the soil sensor detects excessive soils. This can occur during selected wash or rinse functions. APF mode provides one or more purges of excess soils trapped in the soil accumulator at specified intervals in a cycle. 2. The APF mode operates for a total of 10 seconds while the wash pump is operating in a wash or rinse mode. The accumulator screen will be cleaned from jets on the underside of the lower spray
Resumo do conteúdo contido na página número 16
-- NOTES -- 12
Resumo do conteúdo contido na página número 17
SECTION THREE COMPONENT ACCESS COMPONENT LOCATION Upper Spray Active Control Arm Vent Panel Inner Feed Tube Electronic Control Board Middle Spray (Interconnect Arm Board Underneath) Door Latch Assembly Dispenser Assembly LowerSpray Arm Water Inlet Float Sump and Motor Assembly Drain Tube Heating Element Accumulator Check Valve (in drain hose) Soil Sensor Pressure Switch Drain Pump Motor Wash Pump Thermistor Start Capacitor Wash Pump Motor 13
Resumo do conteúdo contido na página número 18
! IMPORTANT Electrostatic Discharge (ESD) Sensitive Electronics ESD problems are present everywhere. ESD may damage or weaken the electronic control as- sembly. The new control assembly may appear to work well after repair is finished, but failure may occur at a later date due to ESD stress. • Use an antistatic wrist strap. Connect wrist strap to green ground connection point or un- painted metal in the appliance. - OR - Touch your finger repeatedly to a green ground connec- tion point or
Resumo do conteúdo contido na página número 19
Removing the Electronic Control Board The electronic control board is located inside the console at the top of the dishwasher door. 1. Disconnect the ribbon connector and the wiring harness connectors from the electronic control board. (Fig. 3-2) 2. Use a flat bladed screwdriver to depress the holding tabs at the left end of the control board assembly while pulling up. (Fig. 3-3, Inset) Use a flat bladed screwdriver to depress the holding tabs Inset at the left end of the control board assembly
Resumo do conteúdo contido na página número 20
Removing the Door Microswitches The Door Switches are located on the right and left side of the door latch assembly. 1. Disconnect the wiring harness connectors from the microswitch terminals. 2. Pull back on the two (2) plastic retaining tabs securing the microswitches to the door latch assembly and lift the microswitches out. (Fig. 3-5) Inset Lift Microswitch Spread Tabs (Caution: These tabs can break.) Fig. 3-5 Removing the Active Vent Use Flat Bladed Assembly Screwdriver and Turn Interior V
