Resumo do conteúdo contido na página número 1
LCD DISPLAY MONITOR
INSTRUCTIONS
LM-170
LM-150
The illustration of the monitor is of LM-170.
01_LM170&150-EN4.indd 1 01_LM170&150-EN4.indd 1 0 06.7.21 10:53:54 AM 6.7.21 10:53:54 AM
ENGLISH
Resumo do conteúdo contido na página número 2
Safety Precautions IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use, and service. Please read these “IMPORTANT SAFEGUARDS” carefully before use. All the safety and operating instructions
Resumo do conteúdo contido na página número 3
POWER CONNECTION The power supply voltage rating of this product is AC 100 – 240 V. The power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure safety and EMC regulations of each countries. For U.S.A. and Canada: For European and Asian For United Kingdom: AC 120 V countries: AC 220 – 240 V AC 220 – 240 V This product is equipped with a grounding-type plug to satisfy FCC rule. If you are unable to insert the plug into t
Resumo do conteúdo contido na página número 4
Safety Precautions (cont.) Make enough room for inserting or removing the Do not attempt to service this product yourself, as power plug. Place the product as close to the opening or removing covers may expose you to outlet as possible. The main power supply for the dangerous voltages and other hazards. Refer all product is controlled by inserting or removing the service to qualified service personnel. power plug. When the product is left unattended and unused for long periods of time, u
Resumo do conteúdo contido na página número 5
Never push objects of any kind into this product Under the following conditions, through openings as they may touch dangerous 1. Turn off the power. voltage points or short out parts that could result 2. Unplug this product from the wall outlet. in a fire or electric shock. 3. Refer service to qualified service personnel. Never spill liquid of any kind on the product. a) When the product emits smoke or unusual smell. b) When the product exhibits a distinct change in performance —for example
Resumo do conteúdo contido na página número 6
Safety Precautions (cont.) Maintenance Unplug this product from the wall outlet before cleaning. Screen To avoid irreparable change in appearance of the screen such as uneven color, discoloration, scratches, be careful about the following: Do not paste or stick anything with any glues or adhesive tapes. Do not write anything on the screen. Do not strike the screen with a hard object. Avoid condensation on the screen. Do not wipe the screen with solvent such as alcohol, thinner, or ben
Resumo do conteúdo contido na página número 7
Contents Safety Precautions ........................................................ 2 IMPORTANT SAFEGUARDS ................................... 2 Maintenance ............................................................. 6 Controls and Features .................................................. 8 Front panel ............................................................... 8 Rear panel .............................................................. 10 Installation ...................................
Resumo do conteúdo contido na página número 8
Controls and Features 7 Front panel 1 24 3 5 6 7 The illustration of the monitor is of LM-170. 2 1 Speaker (Monaural) (LM-170 only) 5 Volume control button (LM-170 only)* Outputs the audio signal of the selected input. While the menu is not displayed, adjust the volume level (00 to 50) by NOTE: pushing the button left or right. For audio signals input to the DVI-D or RGB terminal, left and right audio channel are mixed and output as monaural audio. 6 MENU button 1 2 CHROMA/PHASE button* Di
Resumo do conteúdo contido na página número 9
8 9 p The illustration of the monitor is of LM-170. 8 INPUT SELECT buttons/lamps 7 About the status display Select an input to display. When “STATUS DISPLAY” is set to “ON” (☞ page VIDEO 1: Selects the video signal input to the 16), the status (information of the current input VIDEO 1 terminal. and the monitor settings) is displayed for about 5 VIDEO 2: Selects the video signal input to the seconds in the following cases: VIDEO 2 terminal. When you press the INPUT SELECT button of the D
Resumo do conteúdo contido na página número 10
Controls and Features (cont.) 7 Rear panel a b cd 3 e f g h 2 4 5 6 The illustration of the monitor is of LM-170. 1 1 AC inlet 3 REMOTE (external control) terminal (MAKE/ Power input connector. Connect the provided AC TRIGGER) power cord to an AC outlet (AC 120 V/AC 220 - 240 Terminals for controlling the monitor by an external V, 50 Hz/60 Hz). control. Enables the monitor to be controlled by short- 2 VIDEO terminals circuiting the pin terminal in this terminal or by a VIDEO 1 terminals (
Resumo do conteúdo contido na página número 11
Installation NOTE: Do not rest your arm on the monitor or lean against the monitor. Do not hold the LCD panel when installing the monitor. Make sure to install the monitor securely to prevent the monitor from falling over, which causes damage to the monitor or injury. The illustrations of the monitor is of LM-170. 7 Using the monitor on the stand You can place the monitor in the following two ways when using the monitor on the supplied stand. You can tilt the monitor upward or downward w
Resumo do conteúdo contido na página número 12
Installation (cont.) 7 Installing the monitor on the wall Use a commercial wall mounting unit compliant with the VESA standard (100 mm x 100 mm). NOTE: Detach the stand first. (☞ page 11) Ask your dealer to install. VESA mounting holes (See page 21 for the specifications of the mounting holes.) 7 Installing the monitor on the rack Use a JVC’s RACK MOUNT ADAPTER (RK-C157L1G; not supplied). NOTE: Detach the stand first. (☞ page 11) Ask your dealer to install. 12 0 03_LM170&150-EN4.indd
Resumo do conteúdo contido na página número 13
How to Use the MAIN MENU The MAIN MENU contains the functions for daily use. MAIN MENU Select Adjust When analog RGB signals are input from the computer Select “AUTO ADJ.” Operation guide Shows the buttons for Perform “AUTO each operation. ADJ.” 7 To exit the menu: Select “all reset” Perform “all reset” Next NOTE: The menu automatically disappears in about 30 seconds after the last menu operation. Some items may not appear on the menu. Those items are not available for the current inp
Resumo do conteúdo contido na página número 14
How to Use the SET-UP MENU The SET-UP MENU contains the initial settings of the monitor. SET-UP MENU 7 PICTURE SUB ADJ. Select Select Adjust Press CHROMA/ Next PHASE while Select pressing MENU. “reset” Operation guide Shows the buttons for Perform each operation. “reset” 7 COLOR TEMP. Select 7 To exit the menu: Select Adjust Adjust Next (When selecting “USER1” or “USER2” in 2) 7 SIZE/POSI. ADJ. Select When video signals are input and “SCAN SIZE” is “USER” Select Next Adjust Ex. When “ASPE
Resumo do conteúdo contido na página número 15
7 SET-UP MENU items PICTURE SUB ADJ. Sets the standard level for the picture adjustments by using the CHROMA/PHASE and CONTRAST/BRIGHT buttons on the front panel. 1 CONTRAST* Adjusts the standard level for contrast adjustment. –20 - 00 - +20 1 BRIGHT* Adjusts the standard level for brightness adjustment. –20 - 00 - +20 1 CHROMA* Adjusts the standard level for chroma adjustment. –20 - 00 - +20 1 PHASE* Adjusts the standard level for phase adjustment. –20 - 00 - +20 reset Restores the items in “P
Resumo do conteúdo contido na página número 16
How to Use the SET-UP MENU (cont.) REMOTE SYSTEM Selects the external control system of the MAKE/TRIGGER terminal. Setting value: MAKE (make contact system), TRIG. (trigger system) NO SYNC FUNCTION Selects the screen status when no signal is being input. NO SYNC DISPLAY Sets the screen status when no signal is being input. OFF, SUSPEND (suspend mode), GRAY (gray screen) DELAY TIME Sets the period until the screen status changes after 5, 20, 60 (seconds, approx.) signals stop coming in. STATUS D
Resumo do conteúdo contido na página número 17
How to Use the External Control 7 About the external control The monitor has the MAKE/TRIGGER terminal, which allows you to control the monitor by the MAKE (make contact) or TRIG. (trigger) system. MAKE (make contact) system: Controls the function by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it. TRIG. (trigger) system: Controls the function by inputting the pulse signal instantaneously to the corresponding pin terminal. * Select “MAKE
Resumo do conteúdo contido na página número 18
Troubleshooting Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Reference Problems Points to be checked Measures (Remedy) pages No power supply Is the power plug loosened or Firmly insert the power plug. — disconnected? No picture with the Is the signal cable disconnected? Connect the signal cable firmly. 10 power on Is t
Resumo do conteúdo contido na página número 19
Reference Problems Points to be checked Measures (Remedy) pages Wrong picture Has the picture position or size been Adjust the picture size (H. SIZE/V. SIZE) or position, wrong changed? position (H. POSI./V. POSI.) in “SIZE/POSI. picture size ADJ.” in the SET-UP MENU. 13, 15 When analog RGB signals are input from the computer, perform “AUTO ADJ.” in the MAIN MENU. For some signals, the picture cannot be displayed fully in the effective screen area. — There is no sure method to solve this
Resumo do conteúdo contido na página número 20
Specifications Model LM-170 LM-150 Type LCD Display Monitor LCD panel 17”, active matrix TFT 15”, active matrix TFT Effective Screen Size Width: 337.9 mm (13 1/4”) Width: 304.1 mm (11 15/16”) Height: 270.3 mm (10 5/8”) Height: 228.1 mm (8 15/16”) Number of Pixels Displayed 1280 x 1024 1024 x 768 PC Scanning Frequency H: 31.5 kHz – 80 kHz H: 31.5 kHz – 60 kHz V: 56 Hz – 75 Hz V: 56 Hz – 75 Hz * Some signals within this frequency range may not be displayed depending on the computer you use (“Out
