Manual do usuário Broilmaster BPB26-1

Resumo do conteúdo contido na página número 1

BPB26-1 AND SSPB26-1 PATIO BASE
INSTALLATION INSTRUCTIONS
WARNING: THIS PATIO BASE IS NOT DESIGNED FOR USE WITH AN LP GAS CYLINDER.
WARNING: SEE YOUR GRILL OWNER'S MANUAL FOR PROPER LOCATION, MINIMUM CLEARANCES,
AND OTHER IMPORTANT SAFETY INFORMATION BEFORE PROCEEDING WITH INSTALLATION OF THIS
PATIO POST.
VERIFY THAT ALL PARTS LISTED ON THE EXPLODED VIEW OF THIS MANUAL HAVE BEEN INCLUDED
IN THIS POST BEFORE BEGINNING INSTALLATION.
CAUTION: USE CAUTION WHEN HANDLING PARTS, AS THEY MAY CONTAIN

Resumo do conteúdo contido na página número 2

THIS GAS ACCESSORY IS DESIGNED FOR OUTDOOR USE ONLY: IMPORTANT THIS MANUAL SHOULD BE READ THOROUGHLY BY THE PERSON INSTALLING THE GRILL MOUNTING AND ALL PERSONS WHO WILL USE AND MAINTAIN THE GRILL MOUNTING. THE INSTALLER SHOULD BE SURE THE MANUAL IS LEFT IN THE POSSESSION OF THE USER. THE USER SHOULD RETAIN THIS MANUAL FOR FUTURE REFERENCE WHEN USING OR CLEANING THE GRILL MOUNTING AND TO PROPERLY IDENTIFY ANY REPAIR PARTS THAT MAY BE REQUIRED. WARNING REFERENCE THIS MANUAL FOR PROPER INSTAL

Resumo do conteúdo contido na página número 3

TABLE OF CONTENTS CONGRATULATIONS! You have chosen the finest grill for your outdoor cooking pleasure. Please take time to read this entire manual ® before assembling your premium Broilmaster accessory. Important Information ........................................................................................................................................ 4 Patio Base Parts List & Exploded View ................................................................................................

Resumo do conteúdo contido na página número 4

IMPORTANT INFORMATION Grill Location Gas Types Broilmaster Premium Gas Grills are designed for out- Never use liquid propane gas with a grill designed for door use ONLY. natural gas, or natural gas with a grill designed for liquid propane gas. The type of gas required for your grill is These mounting accessories are designed for use with defined on its product identification label. Questions Broilmaster gas grills and must not be used with any regarding different types of gases should be direc

Resumo do conteúdo contido na página número 5

PATIO BASE PARTS LIST & EXPLODED VIEW All repair part orders should be placed through your local Broilmaster dealer. To locate a dealer in your area, contact Broil- master Customer Service at 800-851-3153 • www.broilmaster.com To ensure prompt and accurate service, please provide the following information when placing a repair part order: Model Number, Part Name, Part Number, and Quantity of parts needed. Key Part Name Quantity BPB26 SSPB26 Number Part Number Part Number 1 9/32 I.D. x 5/8 O.D

Resumo do conteúdo contido na página número 6

PATIO BASE ASSEMBLY The BPB26 and SSPB26 Patio Base are only for use with Broilmaster Gas Grills. Before proceeding with 2 installation read the Owner’s Manual for the proper loca- Fasten the bottom of the post to the cast iron patio tion and minimum clearances to combustible materials base (9) using 9/32 ID x 5/8 OD flat washers, 1/4 lock for your grill and patio base. washers, and 1/4-20 hex nuts. FIGURE 2. Verify that all parts listed in the exploded view of this Anchor the cast iron pat

Resumo do conteúdo contido na página número 7

PATIO BASE ASSEMBLY 4 5 Fasten the four 1/4-20 x 1 3/4" eyebolts (4) to the top Arrange with your local gas company or licensed con- of the square post using 1/4 - 20 x 3/4" bolts, 9/32 ID tractor to have a gas supply line connected to the inlet x 5/8 OD flat washers, 1/4 lock washers, and 1/4-20 of the stainless steel flex tube assembly. The gas supply hex nuts. must have a shutoff valve inside the wall and must be shutoff when the grill is not in use. Position the grill head onto the eyebo

Resumo do conteúdo contido na página número 8

PATIO BASE ASSEMBLY 6 Attach the grease cup bracket assembly (10) to the bottom of the grill casting and fasten with 10-24 x 3/4" bolt, 9/32 ID x 5/8 OD washer, and #10-24 wing nut. Figure 4. Loosen the wing nut and move the slide up or down to accept the grease cup. Be sure to trap the rim of the cup as shown. Use only the supplied grease cup or noncombustible containers for the grease cup (aluminum or tin cans). DO NOT use combustible containers such as Styrofoam Figure 4 or paper