Resumo do conteúdo contido na página número 1
Cordless Headset
Telephone
Model CT10
User Guide
Guide d’Utilisation
Guía para el usuario
Manual de usuário
Resumo do conteúdo contido na página número 2
i
Resumo do conteúdo contido na página número 3
DIAGRAM ii
Resumo do conteúdo contido na página número 4
DIAGRAM KEY Headset Base (Front) 1 19 CT10 Base Headset (P/N 47349-01) 20 2 Clothing Clip Headset Holder/Antenna 21 Power Indicator Light Remote 22 In-Use Indicator Light (Talk) 3 23 Battery Charge Indicator CT10 Remote 4 Mute Indicator Light Light 24 Remote Charging Well 5 Mute Button 6 Jack Page Button 25 25 7 Redial Button 8 Channel Button Base (Underside) 9 26 AC Adapter Jack Headset Cable Retainer 10 In-Use Indicator Light 27 AC Adapter Plug 11 28 AC Adapter Talk/Hangup Button 12 Flash B
Resumo do conteúdo contido na página número 5
Resumo do conteúdo contido na página número 6
CO WEL ME Thank you for selecting the CT10 Cordless Headset Telephone System from Plantronics. This User Guide will help you install your CT10 Telephone System and learn its basic operation.
Resumo do conteúdo contido na página número 7
IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. The symbol identifies and alerts the user to the presence of important operating and service instructions. 3. Unplug this product from the wall outlet before cleaning. Do not use liqui
Resumo do conteúdo contido na página número 8
˜ ˆ ENGLISH FRANÇAIS ESPANOL PORTUGUES KOREAN JAPANESE CHINESE IMPORTANT SAFETY INSTRUCTIONS 8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. 9. Do not overload outlets and extension cords as this can result in the risk of fire or electric shock. 10. Never push objects of any kind into this product through base unit slots as they may touch dangerous voltage points or short out parts that
Resumo do conteúdo contido na página número 9
IMPORTANT SAFETY INSTRUCTIONS 14. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a) When the power supply cord or plug is damaged or frayed. b) If liquid has been spilled into the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adj
Resumo do conteúdo contido na página número 10
˜ ˆ ENGLISH FRANÇAIS ESPANOL PORTUGUES KOREAN JAPANESE CHINESE IMPORTANT SAFETY INSTRUCTIONS BATTERY SAFETY CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the battery pack supplied with this product. 2. Do not dispose of battery pack in a fire. The cells may explode. Check with local codes for possible disposal instructions. 3. Do not open or mutilate battery pack. Released electrolyte is corro- sive and may cause
Resumo do conteúdo contido na página número 11
STEP 1 GENERAL SETUP SELECTING A LOCATION Install the CT10 Base Unit in a location that is near an AC power outlet G and a modular telephone line jack. The base’s location effects the telephone’s range. Try several locations to see which provides the best performance. Select a location that is away from electrical machinery, electrical appliances, metal walls, filing cabinets, wireless security alarms, room monitors, and areas of excessive moisture. GETTING STARTED Unpack the unit and check for
Resumo do conteúdo contido na página número 12
˜ ˆ ENGLISH FRANÇAIS ESPANOL PORTUGUES KOREAN JAPANESE CHINESE STEP 1 SETUP THE REMOTE PREPARING THE REMOTE FOR USE Remove the paper separator between the Remote and the B Rechargeable Battery by pulling it out. Note: If the paper rips before coming out. The Remote and the C Rechargeable Battery Pack can be separated by sliding the Remote up and the Battery Pack down. They can be reassembled by reversing this action. Plug the Headset into the Headset Jack on the Remote an
Resumo do conteúdo contido na página número 13
STEP 1 SETUP THE HEADSET Put on the Headset , and adjust the band until it rests with almost no F pressure on your ear and the top of your head. If the headset is too loose, remove it and gently push the headset band inward slightly to tighten it. If the headset is tight, gently pull the headset band out to loosen it. The microphone boom can be swiveled to position the headset on either F your right or left ear by rotating it up over the head. Use one hand to hold the headset in place. Adjust
Resumo do conteúdo contido na página número 14
˜ ˆ ENGLISH FRANÇAIS ESPANOL PORTUGUES KOREAN JAPANESE CHINESE STEP 2 MAKE A CALL Before using your cordless telephone, put the headset on and adjust it F as needed. To make a call, press the Talk/Hangup Button on the Remote . The In-Use Indicator will light. When you hear dial tone, enter the number you want to call. G To disconnect a call, press the Talk/Hangup Button . STEP 3 RECEIVE A CALL Set the Ringer Switch on the Remote to the ON position. G To answer a call pres
Resumo do conteúdo contido na página número 15
SPECIAL BUTTONS MUTE The Mute Button stops the voice transmission to the receiving party. G When activated, the red LED is “On.” Press the Mute Button again to deactivate the mute function. REDIAL The Redial Button redials the last number dialled. To use, press the G Talk/Hang-up Button . When a dial tone is heard, press the Redial Button. The last number entered will be dialled just as you would have redialled it manually. CHANNEL Your cordless headset telephone has an auto scan feature that G
Resumo do conteúdo contido na página número 16
˜ ˆ ENGLISH FRANÇAIS ESPANOL PORTUGUES KOREAN JAPANESE CHINESE SPECIAL BUTTONS MEM (MEMORY) TO STORE NUMBERS The In-Use Indicator Light should be off. If it is not off, press the G Talk/Hang Up Button once to shut it off. Press the Mem Button followed by the numbers you want to store. Press the Mem Button followed by the one digit number (0-9) on the Telephone Keypad that you want to assign for that number. You can repeat the process for storing numbers until the 10 singl
Resumo do conteúdo contido na página número 17
SPECIAL BUTTONS VOLUME CONTROL The Dual Function Volume Control Keys on the 12 Button Keypad G allow you to adjust the sound level that you hear through the headset. This feature is especially useful for people who have trouble hearing, or are in an especially noisy area like a kitchen or workshop. To increase volume, push and hold the ‘▲/✱’ Key on the Remote for a minimum of 2 seconds or until the volume is comfortable, then release the key. To decrease the volume, push and hold the ‘▼/#’ Key
Resumo do conteúdo contido na página número 18
˜ ˆ ENGLISH FRANÇAIS ESPANOL PORTUGUES KOREAN JAPANESE CHINESE SPECIAL BUTTONS VISUAL REMOTE In-Use Indicator Light — Green LED is “On” only when Remote Talk G Button is activated. Mute Indicator Light — Red LED is “On” only when transmit audio is “muted.” BASE Power Indicator Light — Red LED is “On” whenever the power is G applied to the Base via the AC Power Adapter. In-Use Indicator Light (Talk) — Green LED is “On” only when Remote Talk Button is activated. Charge
Resumo do conteúdo contido na página número 19
TROUBLESHOOTING THE REMOTE DOES NOT RING Make sure that the Ringer is “On”. Ensure that the Telephone Cord and the AC Adapter A are installed correctly. Recharge the Remote Battery by firmly placing it in the E Remote Charging Well . Disconnect the AC Adapter from the power source and G reconnect it in a known good outlet. Use the Remote in an area closer to the Base . I CANNOT HEAR A DIAL TONE Make sure your Remote Rechargeable Battery is E securely seated in the Charging Well and/or fully cha
Resumo do conteúdo contido na página número 20
˜ ˆ ENGLISH FRANÇAIS ESPANOL PORTUGUES KOREAN JAPANESE CHINESE TROUBLESHOOTING MY REMOTE STOPPED WORKING Separate and then reconnect the Rechargeable Battery and C Remote . Remove and replace the AC power cord from the Base . A Return the Remote to the Charging Well for 5 seconds to re- establish a communication link. E CALLER CANNOT HEAR MY VOICE Make sure the Mute Button is off. G Change Channels using the Channel Button . I HEAR A BUZZ OR HUM Try locating your Base in
