Manual do usuário ADT Security Services D9412

Resumo do conteúdo contido na página número 1

Security
System
Owner’s Manual
Supplement
Introduction
This reference supplements the Security System Owner’s Manual (71-06633-000) with the Function List features for
the D9412/D7412. The instructions for the commands listed in this reference are intended to replace those instructions
in the Security System Owner’s Manual. Please refer to the Owner’s Manual for the operation of your new security
system and its other basic Function List features.
NOTE: This supplement should be placed inside the

Resumo do conteúdo contido na página número 2

Resumo do conteúdo contido na página número 3

ACCESS LEVEL CONTROL Description Use this function to manually enable/disable access authority levels assigned to users. This function can be used to temporarily disable a user’s access level instead of deleting and adding the user. I have this feature. q I do not have this feature. q Using Access Level Control 1. Ensure the display shows idle disarmed text. 2. Press the MENU key to enter the Function List, then press NEXT repeatedly until you reach the CHANGE LEVEL CTL? prompt. Press ENT. 3. AC

Resumo do conteúdo contido na página número 4

Resumo do conteúdo contido na página número 5

DOOR CONTROL COMMAND 46 Description There are three sub-functions within the door control function. They are CYCLE DOOR?, UNLOCK DOOR?, and SECURE DOOR?. CYCLE DOOR? momentarily unlocks a door to allow a person into an area. UNLOCK DOOR? unlocks a door to allow free access. SECURE DOOR? unlocks a door and prohibits access regardless of a user’s authority level. I have this feature. q I do not have this feature. q Using Door Control? 1. Ensure the display shows idle disarmed text. 2. Press the C

Resumo do conteúdo contido na página número 6

UNLOCK DOOR? 9. If you wish to unlock a door to allow free access, at the CYCLE DOOR? prompt, press NEXT to enter the UNLOCK DOOR? subfunction. 10. The display will read UNLOCK 1 2 3 4 5 6 7 8 if all doors are at a normal state and are available. If a door is not at a normal state, the number of the door will be replaced with a symbol indicated in the chart above. 11. Enter the number of the door you wish to unlock then press ENT. This door will be unlocked and the display will change to reflect

Resumo do conteúdo contido na página número 7

DELETE USER? COMMAND 53 Description Use this function to delete a personal passcode from your system without assistance from your security company. You need to know the user number for the passcode you want to delete.. I have this feature. q I do not have this feature. q Using DEL USER ? 1. Ensure the display shows idle disarmed text. 2. Press the COMMAND bar. The display shows SYSTEM COMMAND. 3. Press 5 and 3. NOTE: If you prefer, you may use the Function List in place of steps 2 and 3 to init

Resumo do conteúdo contido na página número 8

Resumo do conteúdo contido na página número 9

ADD/CHNG USER? COMMAND 56 Description Use this function to add or change a passcode/card without assistance from your security company. Before adding or changing a passcode/card, you will need to know which user numbers are available, the authority level you want to assign to the new user, and the areas in which the passcode/card will be valid. I have this feature. q I do not have this feature. q Using Add User ?: 1. Ensure the display shows idle disarmed text. 2. Press the COMMAND bar. The disp

Resumo do conteúdo contido na página número 10

33267D 12/97