Manual do usuário Asante Technologies SECURE NET 6001/P/W

Resumo do conteúdo contido na página número 1

Enter the Main Page
Step
SecureNET
Enter Home Camera Page
Open A Microsoft Internet Exploer(IE) Window 3
1
Enter Camera IP address
You Will Enter Home Page After Login
.
Enter Login Window
2
Enter Username: “root”, Password: “root”
Install Internet Explorer Plug-In Components
Step
Install ActiveX
1
Network Camera Live & Control Page
3
3
When the username and password are confirmed, a
NetServer 6001/P/W
When ActiveX Plug-In is installed then you can view
control setup screen pops up under the IE

Resumo do conteúdo contido na página número 2

IP Address settings Connection diagram Step Start Wireless networking 1 PTZ Surveillance Run the IP Finder.exe file from the CD. RS485 Search the product on the network Submit the change 2 4 Search for the product from your LAN. The factory Click Submit to validate new settings. 4 IP setting 192.168.0.20 appears on the screen. Alarm Infrared inductor Video in Alarm input . Alarm output POWER Alarm AMP Changing the IP address, Netmask, HUB Confirmation 5 WAN Internet 3 Default Gateway You may “

Resumo do conteúdo contido na página número 3

Wireless Setting Relocate Camera and Final Test Step Unplugged Ethernet 1 Test & RUN 3 Unplug the RJ45 on both router and the You may “Test” if it has been connected and operated smoothly. network camera so that you can start to use wireless independently. 1) Set Up your PC on the same WLAN subnet. 2) Use IP Finder to identify the Network Camera. 3) Use IE brower to view the video 4) Check to make sure that wireless signal strength is at least 50%. 5) Check to make sure that the Vid