Manual do usuário Linear AM-KPI

Resumo do conteúdo contido na página número 1

1. INTRODUCTION 2. KEYPAD FEATURES
The Model AM-KPI keypad is designed for use with Linear’s AM/II
RED/GREEN YELLOW
access control system. The keypad is housed in a rugged, plastic
POWER/ACCESS "LOCKOUT"
enclosure and is designed to be mounted indoors in a standard single-
INDICATOR INDICATOR
gang electrical box. Tamper resistant screws secure the keypad to its
AM-KPI
mounting plate. The die-cast keys have bright, easy-to-read yellow
BEZEL
graphics.
The keypad is supplied with a satin-chrome

Resumo do conteúdo contido na página número 2

6. ROUTE THE CABLE 7. CONNECT THE CABLE & SET THE DEVICE ADDRESS 8. MOUNT THE KEYPAD EACH AM-KPI KEYPAD EQUALS 9 LOAD UNITS 1 FOLLOW THIS WIRING DIAGRAM HOOK THE KEYPAD ASSEMBLY ONTO THE MOUNTING PLATE TO CONNECT THE KEYPAD CABLE LENGTH FORMULA FOR EACH KEYPAD USED IN THE SYSTEM O 1 O TO THE AM/II CONTROL 1 O 1 B O 1 B 2 INSTALL THE KEYPAD IN TWO SCREWS B O 1 FORMULA CABLE RUN CABLE TYPE 300 FEET MAXIMUM BELDEN 9931 (24 AWG) FEET x LOAD UNITS < 3,000 MAXIMUM 500 FEET MAXIMUM WEICO 9405 (20 AWG)