Resumo do conteúdo contido na página número 1
Luxus A / SR-1
Electriscreen
OWNER’S MANUAL
To the Owner
Installation Instructions
Operating the Screen
Maintenance
LXSR-0903
TO THE INSTALLER: BE SURE TO LEAVE THIS MANUAL WITH THE OWNER .
Resumo do conteúdo contido na página número 2
Printed in U.S.A. ©2003 Stewart Filmscreen Corporation.
Resumo do conteúdo contido na página número 3
Luxus A / SR-1 Electriscreen OWNER’S MANUAL Contents To The Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Preparing The Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Step 1. Hanging The Case . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Step 2. Electrical Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Adjusting The Screen Extension . . . . . . . . . . . . . . . . . . . . .14 Operating The Screen . . . . . . . . . . .
Resumo do conteúdo contido na página número 4
TO THE OWNER Congratulations on your purchase of the finest optical viewing screen available anywhere in the world! Please take a moment to review this manual, it will help ensure you many years of trouble-free service from your new Stewart Filmscreen product. About your Luxus A Series Electriscreen This is Stewart’s most popular electric roll up unit because it can accommodate screen sizes up to 66” x 122” (LX138W). Typically, the screen housing is hidden above the ceiling, and the screen des
Resumo do conteúdo contido na página número 5
HDTV Format (16:9/1.78:1 Aspect Ratio) Luxus A Luxus SR- Image Image Image Weight Model # 1 Model # Diagonal Height Width LX082H- SR082H- 82” 40 1/2” 72” 50 lbs. LX092H- SR092H- 92” 45” 80” 55 lbs. LX100H- SR100H- 100” 49” 87” 60 lbs. LX110H- SR110H- 110” 54” 96” 65 lbs. LX123H- SR123H- 123” 60” 107” 70 lbs. LX135H- 135” 66” 118” 70 lbs. Wide Screen Format (1.85:1 Aspect Ratio) Luxus A Luxus SR- Image Image Image Weight Model # 1 Model # Diagonal Height Width LX082W- SR082W- 82” 39” 72” 50 lbs.
Resumo do conteúdo contido na página número 6
PREPARING THE INSTALLATION Before proceeding with the installation of this screen, be sure to read and understand all the installation and operating instructions thoroughly. All electrical wiring installations must conform to local and national codes and should be performed by qualified service personnel. There are no user-serviceable parts contained within the unit. Preparation Specifications regarding the individual screen dimensions, weight, mounting type, and controls are provided by th
Resumo do conteúdo contido na página número 7
Unpacking Warning! Failure to remove the batten lock-down screws can result in permanent damage to the screen. 1. Remove the outer plastic covering and white wrapping paper surrounding the screen case. 2. Do not remove the wrapping paper surrounding the screen roller. You should remove it only after the unit is hung and all electrical connections have been made. 3. Remove the batten lock-down screws located on the back side of the case. Luxus A/SR-1 Electriscreen: Owner’s Manual 5
Resumo do conteúdo contido na página número 8
STEP 1. HANGING THE CASE Professional mounting techniques should be adhered to. Stewart Filmscreen Corporation cannot be liable for substandard or faulty installations. Make sure that you mount the screen so that the electrical box is on the left side (audience left). Wall installation 1. Mount screen through the holes in the wall mount brackets. Refer to Figure 2. – If mounting onto a wood substructure, #12 screws may be used. – If the unit is to be mounted to plaster, drywall, masonry, or ot
Resumo do conteúdo contido na página número 9
Recessed or concealed mount Support Structure You can install the screen so that the motor is recessed and the bottom is flush with dry wall or a suspended ceiling. Refer to Figure 4. 1. Attach the supplied ceiling mount brackets to the top of the screen unit. 2. Install the unit onto the support structure making sure that the bottom of the case is flush with the finished ceiling. 3. Make sure the unit is level. Drywall or suspended ceiling Figure 4: Recessed or concealed mount Suspended ins
Resumo do conteúdo contido na página número 10
STEP 2. ELECTRICAL HOOK-UP Caution Professional techniques need to be adhered to when making any electrical connection. A qualified electrician should perform these procedures. Be sure to follow all standard safety procedures for installing electrical devices. Do not disassemble or alter the configuration of the motor or the unit's electrical connections. This may cause injury to you or damage to the product. The electrical connection should be made only to the type of power source indicated on
Resumo do conteúdo contido na página número 11
Installing the high voltage switch control (standard) A standard 3-position 120V wall switch is supplied. The high-voltage control is connected to the electrical source. It alternates directions of screen motion by means of the hot lead, using the 3-position switch. Preparing the connection Before making the electrical connections, you need: An available 120V AC constant power source A 4-conductor romex or motor connector cable Making the connections The diagram in Figure 7 illustrates the co
Resumo do conteúdo contido na página número 12
Installing the screen trigger interface option The optional 12V screen trigger interface enables up and down operation of the screen in conjunction with a projector, tuner, VCR, cable box, or switched AC outlet. Once the AC power outlet is installed near the screen, an electrician is not needed to connect the screen trigger interface to the power source. Note: An optional 12V DC transformer is used if there is no 12V power source from the projector or AV control center. Preparing the connectio
Resumo do conteúdo contido na página número 13
Installing the low-voltage 3-button switch option The optional Stewart Filmscreen low-voltage control allows the use of low- voltage wire to connect to the supplied 3-position 24V momentary wall switch. Preparing the connection Before making the electrical connections, you need: An available 120V AC constant power source A 4-conductor switch hook-up cable (4-conductor bell wire or category 5 cable is typically used for long runs) Making the connection Refer to the diagram that is located on
Resumo do conteúdo contido na página número 14
Installing the wireless remote control option The optional Stewart Filmscreen wireless remote control allows control of the screens from anywhere in the room. Once the AC power outlet is installed near the screen, an electrician is not needed to connect the wireless remote receiver module to the power source. Note: The distance between the hand-held remote control and the receiver can be up to 50 feet. It is not necessary to have uninterrupted line-of-sight between the remote and the receiver,
Resumo do conteúdo contido na página número 15
Installing the infrared remote control option The optional Stewart Filmscreen infrared remote control allows control of the screens from anywhere in the room. Note: The distance between the hand-held remote control and the receiver can be up to 50 feet. It is necessary to have uninterrupted line-of-sight between the remote and the receiver. Preparing the connection Before making the electrical connections, you need: An available 120V AC constant power source A 4-conductor switch hook-up cable
Resumo do conteúdo contido na página número 16
OPERATING THE SCREEN The method you use to raise and lower the screen depends on the type of switch control devices you have selected. When you lower or retract the screen, it will stop at its preset limit. If an obstacle (such as a person or furniture) gets in the path of the screen as it is lowered, you should use the switch control to stop the screen's motion; it will not automatically stop if it hits an obstacle. In general, when the screen is not in use, you should store it in the fully re
Resumo do conteúdo contido na página número 17
Down Limit Switch Modifying the extension of the screen You can increase the extension of the screen up to 3" past the factory preset stop, or you can decrease the extension by approximately 4-6" from Up the factory preset stop. Do not attempt to modify the screen extension Limit beyond these recommended amounts. Switch The limit switches are located on the left side of the screen roller tube inside the case, as shown in Figure 12. To increase the screen's fully extended (screen down) stop pos
Resumo do conteúdo contido na página número 18
SCREEN CARE AND CLEANING With reasonable care, you may expect many years of trouble-free use of your Stewart projection screen. We encourage you to keep your screen clean. To protect your screen when it is not in use, store it in the fully retracted position. Avoid getting any foreign material on the screen, as cleaning may prove very difficult. It may not be possible to remove scratches, paint, ink, etc. General maintenance The screen surface on your Luxus Electriscreen is extremely delicate. S
Resumo do conteúdo contido na página número 19
TROUBLESHOOTING Refer to the following guidelines if you encounter a difficulty in the operation of your Stewart Filmscreen. Problems related to electrical or motor function may require a qualified service person or electrician. Should you have a problem that is not addressed here, call the Stewart Filmscreen Corporation. Problem description Probable cause Action to take Screen won't operate. No 120V power available. Check to see if the circuit breaker has switched off. Reset if needed. Check v
Resumo do conteúdo contido na página número 20
www.stewartfilm.com 1-800-762-4999 Fax (310) 326-6870
