Manual do usuário American Standard Reliant+ Single Control Kitchen Faucet 4205.100

Resumo do conteúdo contido na página número 1

0





1





2




3




4





5





6




Installation
Instructions
4205.100
SINGLE CONTROL
KITCHEN PULL-OUT FAUCET
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
Certified to comply with ANSI A112.18.1M
please read these instructions carefully before you begin.
M968473 REV 1.4
TOOLS REQUIRED
Adjustable Wrench Regular Screwdriver Phillips Screwdriver Plumb

Resumo do conteúdo contido na página número 2

0 1 2 3 4 5 6 MAKE WATER SUPPLY CONNECTIONS 2 Turn off hot and cold water supplies before beginning. Connect FLEXIBLE SUPPLIES (1, 2) directly to wall supplies. Connection on fitting supplies are 3/8" compression. Connect left supply (Marked with a Red Stripe) to Hot and right supply (Marked with Blue Stripe) to 2 Cold wall supply. Use adjustable wrench to tighten connections. Do not over tighten. 1 Faucet supplies are 21" lo

Resumo do conteúdo contido na página número 3

0 1 2 3 4 5 6 CHECK CONNECTIONS FOR LEAKS. 5 Move HANDLE down into "off" position. Turn on water supplies and check connections for leaks. Operate HANDLE (2) up and down, left and right to flush water lines thoroughly. Operate HAND SPRAY and check connections for leaks. CHECK CONNECTIONS FOR LEAKS SERVICE 6 If faucet drips, operate HANDLE several times from "off" to "on." Do not apply excessive force. Clogged CARTRIDGE outlets