Manual do usuário Emerson LK59FSST

Resumo do conteúdo contido na página número 1

LIMITED WARRANTY
READ AND SAVE THESE INSTRUCTIONS
What The Warranty Covers:
All products covered by this Owner’s Manual are warranted against all defects in workmanship and materials. You must be the
original purchaser or user of the product to be covered.
What The Period Of Coverage Is:
The fluorescent bulb and electronic ballast are covered by this warranty for two years after the date of purchase; all other
components are covered for one year after the date of purchase. ANY IMPLIED WARRANTY O

Resumo do conteúdo contido na página número 2

How To Order Repair Parts ! WARNING Safety Instructions When ordering repair parts, always give the following information: To avoid fire, shock, and serious personal injury, follow all instructions - Name of Item carefully. - Part Description 1.Read your Owner's Manual carefully before installing the light fixture. - Model Number Retain Owner's Manual for future reference. 2.Be careful of the fan and blades when cleaning, painting, or working near The model number will be found on a label attach

Resumo do conteúdo contido na página número 3

7. Insert the black and white wires through Replacement of the Installation on Emerson NOTE: This equipment has been the lockwasher(8) and hex nut(9) Fluorescent Bulbs Fans with Modular tested and found to comply with supplied. Firmly tighten the hex nut to part 18 of the FCC Rules. This (Detachable) 1.Remove the pendants from the fan and secure the light kit fitter(7) to the switch equipment generates, uses and can light switch chains (Figure 7). Switch Cups cup(1) (Figure 2). radiate radio fre

Resumo do conteúdo contido na página número 4

11. Position the cup/light fitter(1)(7) on 5.Slide the guide plate(5) up the light Installation of FAN SWITCH the cover plate(2) and install the fitter’s threaded nipple until the glass (1) SWITCH CHAIN Fluorescent Bulbs and HOUSING shade(1) mates with the bottom of the three screws(3) that were previously ASSEMBLY (3) WIRE Glass Shade light fitter plate (Figure 6). removed in Step 2 and tighten CONNECTORS BLUE WIRE securely. 6.Install the hex nut onto the threaded WHITE WIRES