Manual do usuário Sylvania RM36

Resumo do conteúdo contido na página número 1

SYLVANIA Emergency Lighting
Installation Instructions
Installation Instructions for Emergency Lights
Model RM36
SAVE THESE INSTRUCTIONS
• Before Installation, read instructions and understand all safety information.
WHEN INSTALLING AND USING ELECTRICAL EQUIPMENT, ALL WORK SHOULD BE PERFORMED BY A LICENSED
ELECTRICIAN AND BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED INCLUDING BUT NOT LIMITED TO
THE FOLLOWING:
WARNING
• To prevent shock or damage, turn power off before inspection,

Resumo do conteúdo contido na página número 2

Step 2: Remove cover plate by first removing the screw caps and then unscrewing the screws. Save screws. Step 3: If installing into wall or ceiling of new construction, set adjustable flange to proper depth according to the thickness of the drywall you plan to use. Measure height and depth of installation and use two of the four screws or similar metal/wood screws to anchor the flange to the stud. A standard hanger bar can also be utilized for more stability. After installing the unit, secure

Resumo do conteúdo contido na página número 3

Step 6: Turn ON AC the power supply (circuit breaker) to emergency light unit. The green LED will light. To test unit, gently depress and hold the green LED button and the lens housing will automatically extend outward to the open position and the lamps will turn on. Release the green LED button and the unit will automatically retract and the lamps will turn off. Replace front cover plate via metal screws and screw cap covers. Green LED charge indicator will stay on as an indication that AC