Resumo do conteúdo contido na página número 1
Installation Instructions / Warranty
Citterio M
34133XX1
Citterio M
34213XX1
Resumo do conteúdo contido na página número 2
Axor Citterio M widespread lavatory faucet 34133XX1 Axor Citterio M widespread bidet faucet 34213XX1 34213XX1 34133XX1 Technical Information Recommended water pressure 14.7 - 72.5 psi Max. water pressure 145 psi Recommended hot water temp. 120� - 140� F* Max. hot water temp 165�F* Hole size in mounting surface valves 1-1/4" spout 1 3/8" Max. mounting surface depth 1 3/8" Flow rate 2.2 gpm *Please know and follow all applicable local plumbing codes when setting the temperature on the water h
Resumo do conteúdo contido na página número 3
Installation Install the friction washer and fiber washer on the valve. Push the valve up through the hole in the mounting surface. Install the sealing ring, escutcheon, and nut. Rest the valve assembly on the mounting surface (1). 3 Tighten the screws (2). Push the handles into place (3). 2 1 Push the spout shank up through the mounting surface (1). 2 Install the sealing ring, escutcheon, and shaft fastening ring (2). The notch on the shaft fastening ring and the notch on the shank must
Resumo do conteúdo contido na página número 4
Check the alignment of the handles. If one is not aligned, pull it off (1), turn it slightly (2), and reinstall it (3). 2 3 1 Install the glide ring and the o-ring. 4
Resumo do conteúdo contido na página número 5
Lubricate spout the o-ring. Push the spout into place. Tighten the spout screw with a 2 mm Allen wrench. Tighten the mounting nut screws. Install the drain pull rod. 5
Resumo do conteúdo contido na página número 6
Thread the connecting hoses into the spout shank by hand. Connect the hoses to the valves with the compression fittings. Tighten the fittings using two wrenches. Do not allow the hoses to twist. Install the hot and cold supply lines (not included). Install the pop-up drain. off on
Resumo do conteúdo contido na página número 7
Install the pop-up drain Remove the plunger assembly. plunger Unscrew the drain outlet flange from the tee. height adjuster Unscrew the tailpiece from the tee. Wrap the threads with plumbers’ thread tape and replace. flange Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. From under the sink, install the black mack gas- ket, white friction ring and retainer nut to the flange. Do not tighten the nut against the bottom sealing gasket of the sink at t
Resumo do conteúdo contido na página número 8
Cleaning (34133 only) If the flow of water diminishes over time, unscrew the aerator using the service key. Rinse the aerator with clear water. Reinstall the aerator. Tighten it with the service key. 8
Resumo do conteúdo contido na página número 9
Replacement Parts 4 1 15 1 13 2 30x1.5 14 3 12 11 5 1 aerator 8 2 000 7 2 handle 3405XX0 3 color-ring set 8 27000 4 spout 8 28XX0 5 nut 8 2 XX0 pull rod 57XX0 7 cold cartridge 4008000 8 8 hot cartridge 400000 fixation set 131000 10 connection hose 4071001 11 handle fixing set 832000 12 flange 8 30XX0 17 13 aerator 73 0XX0 14 ball joint 732XX0 15 spout 8 31XX0 1 aerator service key 8 87000 10 17 compression fittings (pr compression fitt
Resumo do conteúdo contido na página número 10
Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning. Cleaning Materials for Faucets and Showers Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when cleaning faucet
Resumo do conteúdo contido na página número 11
the product for use primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper i
Resumo do conteúdo contido na página número 12
Hansgrohe, Inc. • 140 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel. 770-30-880 • Fax 770-30- 887 www.hansgrohe-usa.com US - Installation Instructions • Part No. 0445721 • Revised 04/2008
