Resumo do conteúdo contido na página número 1
Model RC2001 User Guide
Remote Controller
Resumo do conteúdo contido na página número 2
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interf
Resumo do conteúdo contido na página número 3
Thank you for purchasing the Marantz RC2001 TABLE OF CONTENTS remote controller. This remarkable component has been engineered BEFORE USE .......................................... 2 to provide you with many years of home theater LOADING BATTERIES ...............................................2 enjoyment. Please take a few minutes to read this manual thoroughly before you operate the USING THE REMOTE CONTROLLER WITH RC2001. INFRARED RAYS ..................................................
Resumo do conteúdo contido na página número 4
ENGLISH CAUTION ON BATTERY BEFORE USE � Use AAA type batteries in this remote controller. LOADING BATTERIES � We recommend that you use alkaline batteries. � If the remote controller does not operate from Before using the remote controller for the fi rst close to the main unit, replace the batteries time, load the batteries in the remote controller. with new ones, even if less then a year has The batteries provided are used to verify the passed. operations of the remote controller only.
Resumo do conteúdo contido na página número 5
AV SURRO UND RECEIV ER SR 8001 INPUT SELECTOR VOLUME DISP M UL TI AUT O T UNED ST SPKR A B V O - FF PEAK ATT ANA O L G S URR OUND SLEEP A UTO SURR D IR ECT DI SC 6.1 MTX 6.1 N G I HT D G I IT AL DLGI T A I CL LFER AAC PCM S L S S R DOWN UP S T AND BY ENTER AU X 1 I N P U T POW ER O N/OFF PHO NES D IGIT A L S -VI D EO VI D EO L AUDIO R USING THE REMOTE CONTROLLER WITH INFRARED RAYS The remote controller uses infrared (IR) signals to operate devices. This means that you have to point the IR send
Resumo do conteúdo contido na página número 6
ENGLISH NAMES AND FUNCTIONS REMOTE CONTROLLER q POWER ON and OFF buttons q These buttons are used when controlling devices that have been set with separately powered on w and off remote commands. e w SOURCE ON/OFF button This button is used when controlling devices that have been set with a single power on/off remote command. r r e LCD Display Remote controller display r Programmable soft buttons These buttons are used by the Wizz.it 3 editor t software to make LCD display and button opera
Resumo do conteúdo contido na página número 7
! USB 0 port This port is used to connect the remote controller and a PC with the supplied USB cable to enable editing with the Wizz.it 3 editor software. !0 REMOTE CONTROLLER LCD A Mode display area Home: This is displayed during Home mode. A Device Name: This displays the device mode name that is currently active. This area is always highlighted. B Command display area This displays the information that has been set for the display items in the device modes. B C Battery indicator This di
Resumo do conteúdo contido na página número 8
ENGLISH SLEEP TIMER BASIC OPERATION The SLEEP TIMER is a function that sends a preset remote command after the sleep time has RC2001 BUTTON SETTINGS elapsed. The Wizz.it 3 editor software can be used to � The setting is made using the Wizz.it 3 editor, make the settings for the IR Command, LINK, and the buttons that are assigned to the sleep JUMP, One Touch Operation (Macro) and other timer are operated as shown below. functions in the RC2001. � This is a convenient function for devices th
Resumo do conteúdo contido na página número 9
1. LEARNING FUNCTION OTHER OPERATION Place the remote controller so that its 1. MAIN MENU infrared signal transmitter is facing the infrared signal receiver on the Marantz The various settings for the remote device are remote controller at a distance of about 2 made in the main menu. inches (0.05 m). ENTERING THE MAIN MENU Press the Home button to enter Home 1. mode for the RC2001. Hold down the Home button and Menu 2. button at the same time for three seconds to display MAIN MENU
Resumo do conteúdo contido na página número 10
ENGLISH This screen changes to HOME mode. The remote controller has completed 4. 7. Press the button next to the displayed learning when LEARN OK is displayed on device name whose commands you want the LCD. to learn. � Pressing the ENTER button enables you to continue learning commands for another button in the same device mode. � When the learning mode is completed, press the Home button three times to return the LCD to the MAIN MENU. Notes: • If learning could not be performed, LE
Resumo do conteúdo contido na página número 11
OPERATION SETTINGS 2. TIMER Press the button next to the TIMER SET The timer function of the RC2001 can be used 1. indicator in the LCD in the TIMER menu to send a preset remote controller command at a programmed time. screen to display the timer programming The Wizz.it 3 editor can be used to operate setting screen. multiple devices. One Touch Operation (Macro) can also use the timer function for transmission. CHECKING THE SETTINGS Display the MAIN MENU on the LCD of the 1. RC2001,
Resumo do conteúdo contido na página número 12
ENGLISH Home mode is shown in the LCD. Select the Press a button next to the EVERYDAY or 3. 4. commands and devices for the commands ONE TIME indicators on the LCD to set that will be sent by timer programming. timer operation to either everyday or one- time only operation. � If a command assigned to the HARD button is to be sent by timer programming, press the HARD button when selecting the command to make the setting. � If a command assigned to the SOFT button is to be sent by ti
Resumo do conteúdo contido na página número 13
OPERATION ON/OFF SETTINGS Either press the ENTER button or wait 3. three seconds so that COMPLETED is Press the button next to the ON/OFF 1. displayed on the LCD and the operation indicator in the TIMER menu screen on the settings are automatically completed. LCD to display the timer operation ON/OFF setting screen. � Either press the ENTER button or wait three seconds for the LCD to Press the button next to the TIMER 2. automatically return to the MAIN menu. ON (Enable) or
Resumo do conteúdo contido na página número 14
ENGLISH 3. SYS.SETUP Use the numeric buttons (0 to 9) and cursor 2. buttons (t and u) to set the current time. Display the MAIN MENU on the LCD of the After setting the correct time, press the RC2001, then press the button next to the SYS. ENTER button. SETUP indicator. The items below can be set in the SYS.SETUP screen. � CLOCK (Clock setting) � BACK LIGHT (Backlight illumination time setting) � LCD (LCD setting) � BEEP (Beep sound setting) � MEM CLEAR (Initialization setting) The mes
Resumo do conteúdo contido na página número 15
BACK LIGHT (BACKLIGHT ILLUMINA TION The message COMPLETED is displayed 3. TIME SETTING) on the LCD to indicate that the illumination time setting is completed. Press the LIGHT button on the RC2001 to turn on the backlight, then set the time until the backlight turns off. Press the button next to the BACKLIGHT 1. indicator in the SYS.SETUP menu screen in the LCD to display the backlight illumination time setting screen. � Either press the ENTER button or wait three seconds for th
Resumo do conteúdo contido na página número 16
ENGLISH LCD (LCD SETTING) The message COMPLETED is displayed 3. on the LCD to indicate that the display time Press the button next to the LCD indicator in the setting is completed. SYS.SETUP menu screen in the LCD. The LCD setting menu is displayed. � Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS.SETUP LCD TIMER (LCD timer setting) menu. This sets the time that the LCD remains on, after a button is pressed on the RC2001. � Pressi
Resumo do conteúdo contido na página número 17
CONTRAST BEEP (BEEP SOUND SETTING) (LCD CONTRAST ADJUSTMENT) This sets the built-in beep sound in the RC2001. This enables the LCD contrast to be adjusted. Press the button next to the BEEP Adjust for maximum visibility according to your 1. viewing environment. indicator in the SYS.SETUP menu screen in the LCD to display the beep setting The LCD setting menu is displayed, and so 1. screen. press the buttons next to CONTRAST in the LCD display. Press the side buttons (right: +, l
Resumo do conteúdo contido na página número 18
ENGLISH Note: MEM CLEAR (INITIALIZATION SETTING) The LEARNING and CLOCK settings are not This returns the settings made in the RC2001 to initialized. their initial settings. Press the button next to the MEM CLEAR 1. indicator in the SYS.SETUP menu screen in the LCD to display the initialization setting screen. Press the button next to the NO (Disable) 2. or YES (Enable) indicators on the LCD to either enable or disable initialization. � Either press the ENTER button or wait thr
Resumo do conteúdo contido na página número 19
4. STATUS INDICATOR 5. RESET This displays the settings made in the MAIN If the RC2001 is not operating properly, use the MENU and the status of the remote device. procedure below to perform a reset (restart). Performing a reset does not erase the settings in the RC2001. CHECKING THE STATUS Display the MAIN MENU on the LCD of the Remove the battery case cover. 1. 1. RC2001, then press the button next to the STATUS indicator. Use a paper clip or other object to press the 2. reset bu
Resumo do conteúdo contido na página número 20
9 ins. (228mm) 1ins. (25mm) ENGLISH SPECIFICATIONS RC2001 LCD Resolution .............................................“11x81pixel x6 line ................................................9x81pixel x1line” Backlight ...............................................EL backlight Transmission ........................................................IR Learning .......................... Capability: MAX 1000code Operating/ learning IR frequency range ......................................
