Resumo do conteúdo contido na página número 1
AT-2911GP Network Adapters
Gigabit Fiber Ethernet PoE+ Adapters
AT-2911GP/SXLC
AT-2911GP/SXSC
AT-2911GP/LXLC
AT-2911GP/LXSC
Installation and User’s Guide
613-001872 Rev. A
Resumo do conteúdo contido na página número 2
Copyright © 2013 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. Microsoft and Internet Explorer are registered trademarks of Microsoft Corporation. Netscape Navigator is a registered trademark of Netscape Communications Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Tele
Resumo do conteúdo contido na página número 3
Electrical Safety and Emissions Standards This product meets the following standards: . U.S. Federal Communications Commission Declaration of Conformity Manufacturer Name: Allied Telesis, Inc. Declares that the product: Gigabit Fiber Ethernet PoE+ Adapter Model Numbers: AT-2911GP/SXLC, AT-2911GP/SXSC, AT-2911GP/LXLC, AT-2911GP/LXSC This product complies with FCC Part 15B, Class B Limits: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1
Resumo do conteúdo contido na página número 4
Translated Safety Statements Important: The indicates that a translation of the safety statement is available in a PDF document titled “Translated Safety Statements” posted on the Allied Telesis website at: www.alliedtelesis.com/support/. 4
Resumo do conteúdo contido na página número 5
Contents Preface ..................................................................................................................................................................................9 Safety Symbols Used in this Document................................................................................................................................10 Contacting Allied Telesis ..............................................................................................................
Resumo do conteúdo contido na página número 6
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide Performing the Silent Installation ..........................................................................................................................................60 Installing the Driver Silently ...........................................................................................................................................60 Viewing Supported DPInst Options .........................................
Resumo do conteúdo contido na página número 7
Contents VMQ VLAN Filtering ...........................................................................................................................................................127 Wake Up Capabilities .........................................................................................................................................................128 Wake on Magic Packet...................................................................................................................
Resumo do conteúdo contido na página número 8
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide 8
Resumo do conteúdo contido na página número 9
Preface This manual is the installation and user’s guide for the AT-2911GP Gigabit Fiber Ethernet PoE+ Adapter cards. The adapter cards included in this series are: AT-2911GP/SXLC AT-2911GP/SXSC AT-2911GP/LXLC AT-2911GP/LXSC The Preface contains the following sections: “Safety Symbols Used in this Document” on page 10 “Contacting Allied Telesis” on page 11 9
Resumo do conteúdo contido na página número 10
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide Safety Symbols Used in this Document This document uses the following conventions: Note Notes provide additional information. Caution Cautions inform you that performing or omitting a specific action may result in equipment damage or loss of data. Warning Warnings inform you that performing or omitting a specific action may result in bodily injury. Warning Warnings inform you that an eye and skin hazard exists due to
Resumo do conteúdo contido na página número 11
Preface Contacting Allied Telesis If you need assistance with this product, you may contact Allied Telesis technical support by going to the Support & Services section of the Allied Telesis web site at www.alliedtelesis.com/support. You can find links for the following services on this page: 24/7 Online Support - Enter our interactive support center to search for answers to your questions in our knowledge database, check support tickets, learn about Return Merchandise Authorization (RMA
Resumo do conteúdo contido na página número 12
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide 12
Resumo do conteúdo contido na página número 13
Chapter 1 Introduction This chapter provides an introduction to the Allied Telesis AT-2911GP Gigabit Fiber Ethernet PoE+ Adapter cards. This chapter contains the following sections: “Description” on page 14 “Model Naming Conventions” on page 18 “Supported Operating Systems” on page 19 “Accessing Documents” on page 20 “Contents of Your Shipment” on page 21 “Warranty Registration” on page 22 13
Resumo do conteúdo contido na página número 14
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide Description The AT-2911GP adapter is a Gigabit Ethernet PCI Express (PCIe) card developed based on Broadcom’s BCM5718 Ethernet controller. The adapter card is equipped with one 1000SX or 1000LX fiber optic port and one 10/100/1000T Power over Ethernet Plus (PoE+) copper port capable of providing electrical power to Class 4 devices. The AT-2911GP adapter card can be used as a dual port adapter or a bridge that conne
Resumo do conteúdo contido na página número 15
Chapter 1: Introduction Dual Port The AT-2911GP adapter is a dual port adapter to connect a PC to two separate networks. You can assign an IP address to each port. Adapter After you physically install the AT-2911GP adapter on your Windows operating system, you must install driver software. To install driver software, see Chapter 3, “Installing the Driver Software” on page 35. Note You do not need to install driver software for Linux system because Linux has inbox drivers for the AT-2911GP
Resumo do conteúdo contido na página número 16
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide SC Fiber Optic The AT-2911GP/SXSC and AT-2911GP/LXSC adapter cards are equipped with a 1000BASE-SX or 1000BASE-LX port with the SC Adapter adapter. The SC adapter is shown in Figure 3. Figure 3. SC Fiber Optic Adapter To connect the SC adapter to a network cable, you must have a fiber optic network cable with the SC connector. LC Fiber Optic The AT-2911GP/SXLC and AT-2911GP/LXLC adapter cards are equipped with a 100
Resumo do conteúdo contido na página número 17
Chapter 1: Introduction LED The AT-2911GP adapter card comes with two LED’s built into the copper port as shown in Figure 7. The LED away from the fiber optic port indicates the link and activity status of the copper port; the LED close to the fiber optic port indicates the link and activity status of the fiber optic port. Figure 7. LED’s on the Copper Port Table 1 describes the link states that the LED’s indicate. Table 1. LED Status State Description On Valid link. Off No link. Flashing The
Resumo do conteúdo contido na página número 18
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide Model Naming Conventions The hardware features of the AT-2911GP adapter cards are represented by the letters and numbers in the model names. The conventions for the AT-2911GP adapter cards are identified in Figure 8. Figure 8. AT-2911GP Model Naming Conventions The conventions are defined in Table 2. . Table 2. AT-2911GP Model Naming Conventions Convention Definition 1 Indicates the product name 2 Identifies the physi
Resumo do conteúdo contido na página número 19
Chapter 1: Introduction Supported Operating Systems The AT-2911GP adapter card can be used as a dual port adapter or a bridge to connect two ports. Dual Port The following list shows the supported operating systems to use the AT- 2911GP adapter card as a dual port adapter: Adapter Windows 8 Windows Server 2012 Windows 7 Windows Server 2008 R2 Windows Vista Windows Server 2008 Windows XP Windows Server 2003 Linux The AT-2911GP adapter uses Linux inbox driver software to operate
Resumo do conteúdo contido na página número 20
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide Accessing Documents Documents for AT-2911GP adapter cards are available at Allied Telesis websites. Allied Telesis To access documents for AT-2911GP adapter cards, do the following: Documents 1. Open a web browser, such as Internet Explorer or FireFox, on your system and enter the following: http://www.alliedtelesis.com/ The Allied Telesis home page is displayed. 2. Enter “2911GP” in the search box and press the ente
