Manual do usuário American Dryer Corp. Milnor Phase 7.2.2

Manual para o dispositivo American Dryer Corp. Milnor Phase 7.2.2

Dispositivo: American Dryer Corp. Milnor Phase 7.2.2
Categoria: Placa de rede
Fabricante: American Dryer Corp.
Tamanho: 1.45 MB
Data de adição: 10/27/2013
Número de páginas: 92
Imprimir o manual

Baixar

Como usar?

Nosso objetivo é fornecer-lhe o mais rapidamente possível o acesso ao conteúdo contido no manual de instruções para American Dryer Corp. Milnor Phase 7.2.2. Usando a pré-visualização online, você pode visualizar rapidamente o índice e ir para a página onde você vai encontrar a solução para seu problema com American Dryer Corp. Milnor Phase 7.2.2.

Para sua conveniência

Se a consulta dos manuais American Dryer Corp. Milnor Phase 7.2.2 diretamente no site não for conveniente para você, você tem duas soluções possíveis:

  • Visualização em tela cheia - Para visualizar facilmente o manual do usuário (sem baixá-lo para seu computador), você pode usar o modo de tela cheia. Para começar a visualização do manual American Dryer Corp. Milnor Phase 7.2.2 no modo de tela cheia, use o botão Tela cheia.
  • Download para seu computador - você também pode baixar o manual American Dryer Corp. Milnor Phase 7.2.2 em seu computador e mantê-lo em suas coleções. No entanto, se você não quer perder espaço no seu dispositivo, você sempre pode baixá-lo no futuro a partir de ManualsBase.
American Dryer Corp. Milnor Phase 7.2.2 Manual de instruções - Online PDF
Advertisement
« Page 1 of 92 »
Advertisement
Versão para impressão

Muitas pessoas preferem ler os documentos não na tela, mas na versão impressa. A opção de imprimir o manual também foi fornecida, você pode usá-la clicando na hiperligação acima - Imprimir o manual. Você não precisa imprimir o manual inteiro American Dryer Corp. Milnor Phase 7.2.2, apenas as páginas selecionadas. Respeite o papel.

Resumos

Abaixo você encontrará previews do conteúdo contido nas páginas subseqüentes do manual para American Dryer Corp. Milnor Phase 7.2.2. Se você deseja visualizar rapidamente o conteúdo das páginas subseqüentes, você pode usá-los.

Resumos do conteúdo
Resumo do conteúdo contido na página número 1

PHASE 7.2.2
NON-COIN
USER’S MANUAL
(F.S.S.)
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
ADC Part No. 113193-4

Resumo do conteúdo contido na página número 2

Retain This Manual In A Safe Place For Future Reference Please read this manual carefully to thoroughly familiarize yourself with the Phase 7 non-coin microprocessor controller (computer) system features, operational instructions, and programming characteristics. This manual contains important information on how to employ ALL the features of your new ADC dryer in the safest and most economical way. American Dryer Corporation products embody advanced concepts in engineering, design, and safety.

Resumo do conteúdo contido na página número 3

Table of Contents SECTION I INTRODUCTION....................................................................................................... 3 SECTION II FEATURES.................................................................................................................. 4 A. Dependable Phase 7 Non-Coin Microprocessor Controller (Computer) Solid State Integrated Circuitry 4 B. Fire Suppression System (F.S.S.) ...............................................................................

Resumo do conteúdo contido na página número 4

SECTION IV OPERATING INSTRUCTIONS............................................................................... 14 A. Operating Sequence .............................................................................................................................. 14 B. Operating Notes .................................................................................................................................... 18 C. Fire Suppression System (F.S.S.) Theory Of Operation .....................

Resumo do conteúdo contido na página número 5

SECTION I INTRODUCTION Phase 7 Non-Coin Microprocessor Controller (Computer) Drying System The Phase 7 Non-Coin Microprocessor Controller (Computer) Drying System has been designed with super performance in mind to provide for better temperature regulation, efficiency, performance, consistency, and faster drying times. Among its many amenities, the Phase 7 Non-Coin Microprocessor Controller (Computer) Drying System has a true Automatic Drying Cycle. The Phase 7 Non-Coin Automatic Drying Cycle (

Resumo do conteúdo contido na página número 6

SECTION II FEATURES A. Dependable Phase 7 Non-Coin Microprocessor Controller (Computer) Solid State Integrated Circuitry – Eliminates as many moving parts as possible. B. Fire Suppression System (F.S.S.) – A standard feature, which continually monitors the basket (tumbler) for fires. In the event of a fire, the water supply to the basket (tumbler) will suppress the fire. The Phase 7 non-coin microprocessor controller (computer) will also notify the user that a fire has occurred. C. Program Cha

Resumo do conteúdo contido na página número 7

N. Temperature Conversion Status – Temperature-related programs can be set in either Fahrenheit (°F) or Celsius (°C). ALL temperatures will automatically convert to the corresponding values (+/- 1°) when changes are made. O. High Temperature Protection – If the Phase 7 non-coin microprocessor controller (computer) senses that the temperature in the basket (tumbler) has exceeded 180° F (82° C) for axial airflow, or 220° F (104° C) for radial airflow, it will end the drying cycle and a fault code

Resumo do conteúdo contido na página número 8

SECTION III PROGRAM SELECTIONS A. PREPROGRAMMED CYCLES “A-F” CYCLES The Phase 7 non-coin microprocessor controller (computer) can store in its memory six (6) preprogrammed cycles (keys “A-F” on the keyboard [touch pad]). This allows the user to have the six (6) most commonly used cycles readily available, requiring only the push of a single keyboard (touch pad) entry to start the dryer. “0-40” CYCLES The Phase 7 non-coin microprocessor controller (computer) can store 41 preprogrammed cycles in

Resumo do conteúdo contido na página número 9

PREPROGRAMMED CYCLE MENU SELECTIONS (CYCLES “A-F” or “0-40”): 1. Automatic Drying Cycle (Patent No. 4,827,627) a. The Phase 7 non-coin microprocessor controller (computer) can be programmed to reverse or not reverse. This is done in the “DRYER SETUP” parameter. b. Drying Temperature – Programmable from 160° F to 200° F (71° C to 93° C,), in one-degree increments, and preset at 160° F (71° C) for axial dryers. c. Dryness Level – Programmable for FINISHING, DRY, AND EXTRA DRY. d. Cool Down Time –

Resumo do conteúdo contido na página número 10

B. MANUALLY LOADED CYCLES For occasional or onetime special loads, the operator must enter the specific program features needed. This cycle is not stored within the Phase 7 non-coin microprocessor controller (computer) and must be entered each time. The Manually Loaded Cycle can be set in either the Automatic Drying Mode (Patent No. 4,827,627) or the Timed (Manual) Drying Mode. These modes are selected by pressing the “AUTO” or “MAN” key on the keyboard (touch pad). C. AUTOMATIC DRYING CYCLE

Resumo do conteúdo contido na página número 11

E. LIGHT EMITTING DIODE (L.E.D.) DOT MATRIX DISPLAY The L.E.D. display informs the user of cycle status, program verification, and displays important diagnostic and fault information. A complete listing of the various display messages and their meanings is shown in Section V of this manual. CYCLE IN PROGRESS DISPLAY STATUS During the Drying Cycle, the display will indicate the type of cycle in progress by presenting either one (1) of the following: 1. “AUTO DRYING CYCLE” – Manually Loaded Auto

Resumo do conteúdo contido na página número 12

H. WRINKLE GUARD PROGRAM This program keeps items wrinkle-free when they are not removed from the dryer promptly at the end of the drying and/or cooling cycles. When the drying and cooling cycles are completed, the dryer will shut off, the tone will sound, and the light emitting diode (L.E.D.) display will read “CYCLE DONE”. If the door is not opened or the cycled stopped, the Phase 7 non-coin microprocessor controller (computer) will wait an initial 15 minutes delay time. Once the initial 15

Resumo do conteúdo contido na página número 13

K. REVERSING OPTION This feature helps reduce balling-up or tangling of large items. REVERSING OPTION SELECTIONS: 1. Reverse On or Reverse Off 2. This option can be set to “ON” or “OFF” for each cycle individually. 3. Basket (Tumbler) Spin Time and Dwell (Stop) Time a. Fixed in the Automatic “AUTO” Mode and cannot be changed. 1) Spin Time – 2 minutes forward and 2 minutes reverse. 2) Dwell (Stop) Time – 5-seconds. b. Programmable in the Manual Mode. 1) Spin Time – Programmable from 30-seconds t

Resumo do conteúdo contido na página número 14

0. DRYER SETUP – ALL parameters that pertain to drying are in this menu level. 0. SELECT MODEL – This allows the selection of the heat source applied to the dryer, and whether the dryer is reversing or non-reversing. GAS REVERSING GAS NON-REVERSING STEAM REVERSING STEAM NON-REVERSING ELECTRIC REVERSING ELECTRIC NON-REVERSING 1. SYSTEM TEMP – This selection controls whether the temperature related programs will be operated in Fahrenheit (°F) or Celsius (°C). The programs affected are as follows:

Resumo do conteúdo contido na página número 15

1. REVERSING SETUP – The parameters that pertain to the Reversing Mode are in this menu level. 0. ENTER SPIN TIME 30 TO 120 SECONDS – This parameter (program) is fixed at 2 minutes in the forward direction and 2 minutes in the reverse direction for the Automatic Mode. In the Manual Mode, it is programmable. This Spin Time is programmed here for the Manually Loaded Manual Cycle only. 1. ENTER STOP TIME 5 TO 10 SECONDS – This parameter (program) is fixed at 5-seconds in the Automatic Mode and pr

Resumo do conteúdo contido na página número 16

SECTION IV OPERATING INSTRUCTIONS The Phase 7 non-coin microprocessor controller (computer) allows the operator to choose from six (6) preprogrammed cycles (keys “A-F”). These have been preprogrammed by the factory with the parameters (programs) shown in Section VII. There are also additional (“0-40”) cycles that are preprogrammed by the factory with the parameters (programs) shown in Section VII. For occasional or onetime special loads, the operator must set the specific programs needed, uti

Resumo do conteúdo contido na página número 17

6) Once the Cool Down Cycle begins at the end of the heat cycle, the light emitting diode (L.E.D.) display will read COOL DOWN TEMP ___/___ MINUTES REMAINING. At the end of the heat cycle, the dryer will shut off the heat and continue the fan and basket (tumbler) until the Cool Down Time or temperature is reached. 7) Once the Cool Down Cycle is completed, the Phase 7 non-coin microprocessor controller (computer) will proceed into the Wrinkle Guard Cycle. The Audio Alert tone will sound (for th

Resumo do conteúdo contido na página número 18

7) Once the Cool Down Cycle is completed, the Phase 7 non-coin microprocessor controller (computer) will proceed into the Wrinkle Guard Cycle. The Audio Alert tone will sound (for the amount set in Audio Alert On Time). The light emitting diode (L.E.D.) display will read “CYCLE DONE”. The dryer will wait an initial 15 minute delay before going into a 15-seconds ON, 5 minutes OFF cycle. These times are fixed and are not programmable. During the ON Time, the blower (fan) and the basket (tumbler

Resumo do conteúdo contido na página número 19

NOTE: Press and hold the “DOWN ARROW” to view the basket (tumbler) RPM. 7) Once the preprogrammed percentage of extraction (dryness level) is reached, the drying cycle will end and the Cool Down Cycle will begin. 8) Once the Cool Down Cycle begins at the end of the heat cycle, the light emitting diode (L.E.D.) display will read COOL DOWN TEMP ___/___MINUTES REMAINING. At the end of the heat cycle, the dryer will shut off the heat and continue the fan and basket (tumbler) until the Cool Down Ti

Resumo do conteúdo contido na página número 20

7) The dryer will now display “PRESS START”. Press the “START/ENTER” key to start the dryer. The light emitting diode (L.E.D.) display will read MANUAL DRYING CYCLE, __MINUTES REMAIN. NOTE: The dryer can be stopped at any time by pressing the “STOP/CLEAR” key; at this time the dryer will go into a cycle pause. If the “STOP/CLEAR” key is pressed again at this point, the cycle that was in progress will be cancelled and returned to the “READY” state. 8) Once the programmed drying time has exp


Manuais similares
# Manual do usuário Categoria Baixar
1 Sony BTA-NW1A Manual de instruções Placa de rede 2
2 Sony BKMW-E3000 Manual de instruções Placa de rede 2
3 Sony AC-SQ950D Manual de instruções Placa de rede 0
4 Sony BBV RX100 Manual de instruções Placa de rede 3
5 Sony CLIE A-AVZ-100-11 Manual de instruções Placa de rede 1
6 Sony BTA-NW1 Manual de instruções Placa de rede 11
7 Sony AC-NWUM50 Manual de instruções Placa de rede 1
8 Sony AR-B1474 Manual de instruções Placa de rede 2
9 Sony BKM-FW32 Manual de instruções Placa de rede 1
10 Sony 4000CL-MAV-PBIO Manual de instruções Placa de rede 1
11 Sony FA-ST1AM Manual de instruções Placa de rede 0
12 Sony MVC-FDR3/FDR3E Manual de instruções Placa de rede 1
13 2Wire third-party wireless Ethernet adapters Manual de instruções Placa de rede 1
14 3Com 10/100BASE-T4 PCI Manual de instruções Placa de rede 1
15 3Com 3C389 Manual de instruções Placa de rede 0