Resumo do conteúdo contido na página número 1
SpotLine TM M110
User Guide
Resumo do conteúdo contido na página número 2
SpotLine M110 User Guide All Rights Reserved. This document, as well as the software and data described in it, is furnished under license and may only be used or copied in accordance with the terms of the license. Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, electronic, mechanical, optical, recording or otherwise, without the prior written permission of Spo
Resumo do conteúdo contido na página número 3
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment had been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection ag
Resumo do conteúdo contido na página número 4
SpotLine M110 User Guide Table of Contents 1.0 Introduction...................................................................................6 2.0 Specifications................................................................................8 3.0 Getting Started........................................................................... 10 3.1 Installation............................................................................................................... 10 3.2 Setup......
Resumo do conteúdo contido na página número 5
6.1 Terminal to Host Cabling........................................................................................ 45 6.2 Serial Printer Cabling.............................................................................................. 46 7.0 Emulation.................................................................................. 47 7.1 General.................................................................................................................... 47 7.2 Keyboard Control C
Resumo do conteúdo contido na página número 6
1.0 Introduction The SpotLine M110 is part of a new generation of asynchronous/LAN terminals designed for all multi-user environments, from microcomputers to minis to mainframes. And why is this concept new? It is new and original because the SpotLine M110 demonstrates six key characteristics: Color, Performance, Expandability, Intelligence, Standardization and Integration. Color: The color can be controlled completely by the host computer, with the application program setting w
Resumo do conteúdo contido na página número 7
Standardization: The SpotLine M110 is designed to work with industry standard keyboards, monitors and printers, enabling simple replacement and maintenance of any component. Integration: The SpotLine M110 has been designed for fast, friendly and simple setup, allowing for immediate and easy integration with your host computer. The resulting system will then use homogenous peripherals, monitors and keyboards. 7
Resumo do conteúdo contido na página número 8
1.0 Specifications The principal characteristics of the SpotLine M110 are: EMULATION: The SpotLine M110 has a number of built-in emulation modes designed to fully support the demands of the principal multi-user operating systems available in the marketplace. Emulations include SCO/ANSI, Pcterm, IBM 3151, DEC VT family, and others. LAN: The SpotLine M110 uses industry standard Ethernet TCP/IP to provide: - ARP/ICMP/IP/TCP/UDP/Telnet/LPR services. - Up to 8 simultaneous Telnet s
Resumo do conteúdo contido na página número 9
PARALLEL PRINTER: The parallel printer port supports a local printer off the terminal. The buffer allows for the rapid transmission of data from the host computer. Printers may then be used as local or system wide devices. SERIAL PRINTER: A serial printer may be connected to the Serial 1 or Serial 2 ports, or both, on the SpotLine M110. The buffer for print functions allows for efficient use of the chosen port, and printers may then be local or system wide resources. 9
Resumo do conteúdo contido na página número 10
2.0 Getting Started 3.1 Installation Follow these steps to install your SpotLine M110: v Connect a VGA monitor to the monitor port. v Connect your chosen keyboard v Connect your terminal to the host server via the LAN using RJ-45 UTP Ethernet, if you wish to use it as a TCP/IP terminal. There are no switches to set. The terminal will automatically detect which connector you have used. v Connect a suitable cable to either the SERIAL 1 or SERIAL 2 RS- 232 connectors, and the prim
Resumo do conteúdo contido na página número 11
3.2 Setup There are a number of configuration parameters that can be setup for your terminal. If you are only using it as a serial asynchronous devices, proceed to the next chapter. If you will use the SpotLine M110 as a LAN terminal, you must first set the IP address for the terminal (see 4.1.4). As is normal for LAN devices, all those on the same LAN segment must have the same 3 first digits, and a unique last digit. To confirm that the IP address is set correctly, and that t
Resumo do conteúdo contido na página número 12
3.0 Usage 4.1 Configuration Setup All the parameters of the terminal are accessible from on-screen menus, once you have powered up the unit. To access the menu and configuration parameters, press the following keys simultaneously. ALT + Esc (Please note: If the system key has been changed to Scroll Lock, then you must use Scroll Lock + Esc to access the setup menu) The main menu will appear as follows: Staff V5.3dM Copyright © SpotLine, Inc. 1999, 2000 USA-0212-0
Resumo do conteúdo contido na página número 13
While the menus are all different, the following keys always work the same: v Press the TAB and UP/DOWN keys to navigate to any menu item. The current selection will be shown in reverse video. v Press the ENTER key to accept any valid choice. v Press ESC to return to the preceding menu. v Press the LEFT or RIGHT arrow keys to select alternative values for any parameters. v Press the F1 function key to see a full list of the possible choices. v Use the Space Bar to cycl
Resumo do conteúdo contido na página número 14
Language Language: Specify the language set you will use. French English Keyboard Keyboard: Specify the keyboard nationality. French German Italian Spanish Swiss German Portuguese American Belgium Swiss French Color Setup Color Setup: Select Color or Monochrome No Yes Default Sessions 1 Default Sessions: Specifies the session number you 2 wish to default to. 3
Resumo do conteúdo contido na página número 15
Beeper Beeper: Allows you to select the volume of the beeper. High Medium Low Off 15
Resumo do conteúdo contido na página número 16
Status Line: Allows you to select the position of the Status Line Status Line Bottom Top None Screen Saver: Allows you to activate or de-activate the screen power saver, and set the time (in minutes) of no activity after which it should be activated. Note: Screen Saver message is limited to 16 characters. 4.1.2 Port Configuration This menu is used to set all the parameters relative to the two serial ports: Staff V5.3dM Copyright SpotLine, 1
Resumo do conteúdo contido na página número 17
The F1 Menu Selections for this screen are: Type Type: Specifies the usage type (Terminal, Printer, Rtelnet, Rtty) Not Used Terminal Printer Rtelnet Rtty Speed Speed: Specify the baud rate for the port 115200 (1200 to 115,000) 57600 38400 19200 9600 4800 2400 1200 600 300 150 110 50 Data Data: Specify the number of data bits (7/8) 8 bits 7 bits Parity Parity: Parity type (none, odd, even)
Resumo do conteúdo contido na página número 18
Flow Flow: Specifies the transmission protocol None (NONE, DTR, XON/XOFF, XPC.) DTR XON/XOFF XPC Line Line: Specify the nature of the connection to the serv ( Direct ) Direct Host Hostname: Name from the Host Table (in Reverse Telnet mode only) None Term: < See Section 4.1.3a > 18
Resumo do conteúdo contido na página número 19
4.1.3 Sessions This menu specifies the different parameters relative to the different simultaneous sessions: Staff V 5.3dM Copyright © SpotLine, Inc. 1999, 2000 USA-0212-000003 Sessions Sn Emulation Keyb. Monit. Media Printer Host Auto. Term 1 [ Ansi/SCO ] [ Asc ] [ Colo ] [ Telnet ] [ Parallel ] [ None ] [ No ] ( Default ) 2 [ Ansi/SCO ] [ Asc ] [ Colo ] [ None ] [ None ] [ None ] [ No ] ( Default ) 3 [ Ansi/SCO ] [ Asc ] [ Colo ]
Resumo do conteúdo contido na página número 20
Keyboard Keyboard: Specifies the codes to use for the keyboard Scn (Scan (Scan Codes or ASCII) Codes) Ascii Monitor Monitor: Specifies color or monochrome Monochrome Color Media Media: Specifies which port to use for this session None (None, Ser. 1, Ser. 2, Telnet) Ser. 1 Ser. 2 Telnet Printer Printer: Specifies the local printer port for this session None (None, Parallel, Serial 1, Serial 2) Parallel Serial 1 Serial 2
