Manual do usuário LOREX Technology External IDE HDD Bay ACC-HDB80

Resumo do conteúdo contido na página número 1

MODEL: ACC-HDB / ACC-HDB80
EXTERNAL IDE HDD BAY
THIS PACKAGE CONTAINS: NOTE::
1 - HDD (Hard Disk Drive) Bay Model ACC-HDB does not
include a HDD
1 - 12V DC Power supply
1 - 2 keys for cartridge Model ACC-HDB80
includes a 80 GB HDD
1 - 40 pin interface cable
1 - Owner’s Manual
INTRODUCTION:
Congratulations on purchasing the External IDE HDD Bay. This external hard drive bay facilitates recording to
a Slave HDD from a DVR system with an IDE Sub input. The system has a 12V DC power supply, pow

Resumo do conteúdo contido na página número 2

IDE-SUB VIDEO AUDIO INSTALLATION: Back of Unit IDE Sub Output (40 pin) 12V DC Power Adapter Connection Power Switch 1. Connect the 40 pin interface cable to the IDE Sub output on the External IDE Bay Unit. Connect the other end of this cable to the IDE Sub input on the back of the DVR or DVR combo unit 2. Follow the procedure in the DVR or DVR Combo owner’s manual for installing the HDD unit. Important Note: If you are using your own HDD, please set the jumper to SLAVE. Refer to the instruct

Resumo do conteúdo contido na página número 3

TROUBLESHOOTING: If the system does not function properly, please check the following points: PROBLEM SOLUTION Slave HDD not readable Check the jumper PIN connection. Activate the Slave HDD in the DVR or DVR Combo’s Menu options. (See the Owner’s Manual for the DVR or DVR Combo). HDD not found Re-insert HDD as per instructions on “Installing the HDD”. Make sure that the HDD cartridge is locked. Check the jumper setting, it must be set to SLAVE. Keypad doesn’t work Remove the Key Lock Recordi