Resumo do conteúdo contido na página número 1
Multi-Function Wire-
less Router
Wireless Access Point
Broadband Internet Access
4-Port Switching Hub
Quick Install Guide
This guide covers only the most common
situations. Please refer to the full User Manual
on the CD-ROM if your LAN has any of the
following:
• Router
• Existing DHCP Server
• PCs using Fixed (Static) IP Addresses
M73-APO09-560
Resumo do conteúdo contido na página número 2
Requirements • DSL or Cable modem for broadband Internet access. • Standard Network cables. • TCP/IP network protocol installed on each PC. • Wireless Access Point requires Wireless devices compliant with the IEEE 802.11g specifications. Setup Physical Installation 1. Ensure the Wireless Router and the DSL/Cable modem are powered OFF before commencing. Leave your DSL/Cable modem connected to its wall socket (phone line or cable input). 2. Use standard LAN cables to connect PCs t
Resumo do conteúdo contido na página número 3
4. Connect the supplied Power Adapter and power on. 5. Check the LEDs • The Power, Internet, and WLAN LEDs should be ON. • For each active LAN (PC) connection, the LAN LED should be ON. Configuration The Wireless Router can "Plug and Play" if your DSL/Cable modem connec- tion uses only a dynamic IP address. Testing Plug and Play 1. Power up the DSL/Cable modem. 2. Power up the Wireless Router. 3. Power up the PCs. 4. On the PC, start your Web Browser, and try to connect to a well-k
Resumo do conteúdo contido na página número 4
Manual Configuration 1. Start your PC. If it is already started, restart it. It will then obtain an IP Address from the Wireless Router's DHCP Server. 2. Start your WEB browser. In the Address box, enter the following: HTTP://192.168.1.254 The default user name is 〝admin 〞, the default password is left blank. 3. Press the Setup button to configure the router. 4. Step through the Setup Wizard until finished. Refer to the data from your ISP, and the table below, to ensure your ch
Resumo do conteúdo contido na página número 5
PC Setup - Windows TCP/IP Setup • If using the default Wireless Router settings, and the default Win- dows TCP/IP settings, no changes need to be made. • If using a specified (fixed) IP address on your PC, refer to the user man- ual for details of the required changes: • The Gateway must be set to the IP address of the Wireless Router • The DNS should be set to the address provided by your ISP. Windows 95 On Windows 95, TCP/IP was not installed by default. To check if TCP/IP is insta
Resumo do conteúdo contido na página número 6
4. The option "Obtain an IP address automatically" should be selected, as shown above. Internet Access For Windows 9x/ME/2000 1. Select Start Menu - Settings - Control Panel - Internet Options. 2. Select the Connection tab, and click the Setup button. 3. Select "I want to set up my Internet connection manually, or I want to connect through a local area network (LAN)" and click Next. 4. Select "I connect through a local area network (LAN)" and click Next. 5. Ensure all of the boxe
Resumo do conteúdo contido na página número 7
For Windows XP 1. Select Start Menu - Control Panel - Network and Internet Connections. 2. Select Set up or change your Internet Connection. 3. Select the Connection tab, and click the Setup button. 4. Cancel the pop-up "Location Information" screen. 5. Click Next on the "New Connection Wizard" screen. 6. Select "Connect to the Internet" and click Next. 7. Select "Set up my connection manually" and click Next. 8. Check "Connect using a broadband connection that is always on" and click
Resumo do conteúdo contido na página número 8
Macintosh Setup Internet Access 1. Open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via pop-up menu. 3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank. 4. Close the TCP/IP panel, saving your settings. Note: If using manually assigned IP addresses instead of DHCP, the required changes are: • Set the Router Address field to the Wireless Router's IP Address. • Ensure your DNS settings are correct. Page 7
Resumo do conteúdo contido na página número 9
Linux Setup using X Windows Internet Access Follow this procedure to set your system to act as a DHCP client, obtaining an IP Address and related data from the Wireless Router's DHCP Server. 1. Start your X Windows client. 2. Select Control Panel - Network 3. Select the "Interface" entry for your Network card. Normally, this will be called "eth0". 4. Click the Edit button, set the "protocol" to "DHCP", and save this data. 5. To apply your changes • Use the "Deactivate" and "Activa
Resumo do conteúdo contido na página número 10
Wireless Access Point Setup In order to use the Access Point, other Wireless devices must use the same SSID and WEP settings as the Wireless Router. The Wireless Router's default settings are as follows. Setting Wireless Router SSID Default value: Untitled This may be changed on the Wireless screen, on the Wireless Router's main menu. WEP Default value: Disabled Use the Wireless screen, on the Wireless Router's main menu, to enable and config- ure WEP. Ensure the Wireless Router
