Resumo do conteúdo contido na página número 1
HS-3000/4M
386 ISA Bus SBC
•CRT/Panel•RS-232/422/485•4 COM•
•PC/104•DOC•WDT•Single +5V•
ISA Bus Industrial Single Board Computer
Resumo do conteúdo contido na página número 2
Copyright Disclaimers Copyright Disclaimers Copyright Disclaimers The accuracy of contents in this manual has passed thorough checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The manufacturer will not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if adv
Resumo do conteúdo contido na página número 3
Table of Contents Chapter 1 General Description..............................1 1.1 Major Features.................................................................. 2 1.2 Specifications ................................................................... 3 1.3 Board Dimensions............................................................ 4 Chapter 2 Unpacking .............................................5 2.1 Opening the Delivery Package........................................ 5 2.2 Inspect
Resumo do conteúdo contido na página número 4
Chapter 4 AMI BIOS Setup.................................27 4.1 Starting Setup................................................................. 27 4.2 Using Setup..................................................................... 28 4.3 Main Menu....................................................................... 29 4.4 Standard CMOS Setup ................................................... 30 4.5 Advanced CMOS Setup ................................................. 31 4.6 Advanced
Resumo do conteúdo contido na página número 5
Safety Instructions Safety Instructions Safety Instructions Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This helps to discharge any
Resumo do conteúdo contido na página número 6
This page is intentionally left blank.
Resumo do conteúdo contido na página número 7
Chapter 1 General Description The HS-3000/4M is ISA Bus ALi M6117C chipset industrial single board computer. The board design combine together with all necessary input and output effects interfaces which makes it an ideal all-in-one industrial single board computer. The board design with 40MHz Bus clock rate architecture. The HS-3000/4M supports one SIMM socket with a max. capacity of 16MB and 4MB RAM onboard. The IDE interface with LBA mode access to IDE drive interface architectur
Resumo do conteúdo contido na página número 8
The board design with 65545 CRT/Panel display controller provides internal connections to CRT or Panel. The VGA provides up to 1024 x 768 x 16 colors resolution. If a non-expect program cause halts, the onboard Watchdog Timer (WDT) will automatically reset the CPU or generate an interrupt. The WDT is designed with pure hardware and doesn’t need any arithmetical functions of a real-time clock chip. This ensures the reliability in an unmanned or standalone system. 1.1 Major Features T
Resumo do conteúdo contido na página número 9
1.2 Specifications CPU: 386SX-40 embedded in ALi M6117C chipset Bus Interface: ISA Bus Memory: One SIMM socket with a max. capacity of 16MB and 4MB RAM onboard Chipset: ALi M6117C I/O Chipset: SMC 37C669 x 2 VGA: C&T 65545 with 1MB memory supporting CRT/Panel displays up to 1024 x 768 at 16 colors IDE: Two IDE disk drives supporting LBA mode and with a transfer rate of 11MB/sec. FDD: Supports up to two floppy disk drives Parallel: One enhanced bi-directional parallel port
Resumo do conteúdo contido na página número 10
1.3 Board Dimensions 4
Resumo do conteúdo contido na página número 11
Chapter 2 Unpacking This chapter explains unpacking the board, checking the equipment and documentation and where to go from there. 2.1 Opening the Delivery Package The HS-3000/4M is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety Instructions in front of this manual describe anti-static precautions and procedures. 2.2 Inspection After unpacki
Resumo do conteúdo contido na página número 12
It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product. In case you discover any missing and/or damaged items from the list of items, please contact your dealer immediately. 6
Resumo do conteúdo contido na página número 13
Chapter 3 Hardware Installation This chapter provides the information on how to install the hardware using the HS-3000/4M. This chapter also contains information related to jumper settings of switch, watchdog timer, and the DiskOnChip address selection etc. 3.1 Before Installation After confirming your package contents, you are now ready to install your hardware. The following are important reminders and steps to take before you begin with your installation process. 1. Make sure that
Resumo do conteúdo contido na página número 14
3.2 Board Layout 8
Resumo do conteúdo contido na página número 15
3.3 Jumper List Jumper Definition Setting Page COM 4 Use RS-232 or RS-422/485 Select: JP1 Open 17 RS-232 JP8 IRQ12 Enabled/Disabled Select: Enabled Short 18 JP9 WDT Active Type Select: Reset System Short 1-210 TM JP11 DiskOnChip Address Select: D000 Short 1-210 RS-422/485 Receiver Enabled/Disabled Select: JP12 Short 1-2 17 Always Enabled RS-422/485 Transmitter Enabled/Disabled JP13 Short 1-2 17 Select: Always Enabled JP14 WDT Out Period Select: 1 sec. Short 5-610 JP15 Flash ROM
Resumo do conteúdo contido na página número 16
3.5 DiskOnChip Address Setting TM The DiskOnChip function allows the system to boot or operate TM without a FDD or a HDD. DiskOnChip modules may be formatted as TM drive C or A. With DiskOnChip , user may also execute DOS commands such as FORMAT, SYS, COPY, XCOPY, DISCOPY and DISKCOMP etc. The U9 location onboard the HS-3000/4M is the DiskOnChip module socket. Jumper JP11 assigns the address setting of the installed module. Setting the 8 pins of JP11 allows you to select the startin
Resumo do conteúdo contido na página número 17
JP9: Watchdog Timer Active Type Select 1 JP9 Description Short 1-2 (default) System Reset Short 2-3 Active NMI Open Disabled 3 JP14: Watchdog Timer Out Period Select Period PINS 1-2 PINS 3-4 PINS 5-6 PINS 7-8 1 sec Open Open Short Open (default) 2 8 2 sec Open Open Short Short 1 7 10 sec Open Short Open Open 20 sec Open Short Open Short 110 sec Short Open Open Open 220 sec Short Open Open Short The watchdog timer is disabled after the system power-on. The watchdog tim
Resumo do conteúdo contido na página número 18
WT_Refresh PUSH AX ; keep AX, DX PUSH DX MOV DX,WDT_ET_RF ; refresh the WDT IN AL,DX POP DX ; get back AX, DX POP AX RET WT_DISABLE PUSH AX PUSH DX MOV DX,WDT_DIS ; disable the WDT IN AL,DX POP DX ; get back AX, DX POP AX RET 3.7 VGA Controller The onboard C&T 65545 CRT/Panel display controller provides up to 1024 x 768 at 16 colors resolution. The HS-3000/4M provides two connection methods of CRT and Panel device. CN18 offers a 1
Resumo do conteúdo contido na página número 19
CN11 Description CN11 Description 13 P 14 P 4 5 15 P 16 P 6 7 17 P 18 P 8 9 19 P 20 P 10 11 21 P 22 P 12 13 23 P 24 P 14 15 P P 25 26 16 17 27 P 28 P 18 19 29 P 30 P 20 21 31 P 32 P 22 23 33 GND 34 GND 35 SHFCLK 36 FLM 37 M 38 LP 39 GND 40 ENABKL 41 GND 42 ASHFCLK 43 VCC 44 VCC 2 44 1 43 3.7.1 Connectors for Standard LCDs Sharp LM64183P (640 x 480 DSTN MONO LCD) Sharp LM64P83(CN1) HS-3000/4M(CN11) PIN Description PIN Description 1 S 36 FLM 2 CP1 38 LP 3 CP2 35 SHFCLK
Resumo do conteúdo contido na página número 20
Sharp LM64C35P (640 x 480 DSTN STN Color) Sharp LM64C35P(CN1) HS-3000/4M(CN11) PIN Description PIN Description 1 DL4 16 P7 2 VSS 3 GND 3 DL5 15 P6 4 TD 36 FLM 5 DL6 14 P5 6 LP 38 LP 7 DL7 13 P4 8 VSS 4 GND 9 VSS 8 GND 10 XCK 35 SLFCHK 11 DL0 24 P15 12 VCON - Contrast Adjust 13 DL1 23 P14 14 VDD 5 +5V 15 VSS 33 GND 16 VDD 6 +5V 17 DL2 22 P13 18 DISP 6 +5V 19 DL3 21 P12 20 N/C - - 21 VSS 34 GND 22 DU3 17 P8 23 DU4 12 P3 24 DU2 18 P9 25 DU5 11 P2 26 DU1 19 P10 27 VSS
