Manual do usuário American Standard TOWNSQUARE T555.500

Resumo do conteúdo contido na página número 1

Installation
Instructions
TOWNSQUARE
T555.500
BATH/SHOWER TRIM KIT
T555.501
PRESSURE BALANCING BATH
T555.502
AND SHOWER TRIM KIT
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Certified to comply with ANSI A112.18.1
M968235 Rev. 1.5
Required Tools
Phillips Screwdriver Flat Blade Screwdriver
Adjustable Wrench
Channel Locks
Plumbers' Putty or C

Resumo do conteúdo contido na página número 2

7 5 3 1 1 1 5 5 0 1 1 3 3 1 1 1 1 9 9 7 7 5 5 3 3 1 1 INSTALL HANDLE INSTALL TRIM 1 2 CAUTION: Protect finish on SHOWER ARM, SHOWER HEAD and TUB SPOUT when installing. Install HANDLE BUSHING (1) onto CAP (2). When finished tiling the wall, remove PLASTER GUARD (A) and turn off water supply. Find correct position of HANDLE (3) and push HANDLE (3) onto VALVE STEM (4). Push CAP (1) over VALVE CARTRIDGE (2). Install HANDLE SCREW (5) and push in INDEX Mount ESCUTCHEON (3) to valve body with SC

Resumo do conteúdo contido na página número 3

TO GAIN ACCESS TO VALVE FOR SERVICING 4 Pull INDEX CAP, unscrew HANDLE SCREW and pull HANDLE off valve stem. Remove two SCREWS holding ESCUTCHEON and remove ESCUTCHEON. Remove COVER by pulling straight out. Shut off water supply by either closing off main water supply, or closing off the hot and cold CHECK STOPS on valve. VALVE LEAKS WHEN SHUT OFF Remove CARTRIDGE (1) by removing CARTRIDGE SCREWS (2). Remove three SCREWS (3) from FIXATION RING (4) and pull out PRESSURE BALANCING (5) unit. Clean