Manual do usuário Grizzly T10668

Resumo do conteúdo contido na página número 1

MODEL T10667/T10668
BALD EAGLE FLOATING
REAMER HOLDER KIT
INSTRUCTIONS
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction Inventory
The T10667/T10668 Bald Eagle Floating Reamer Description Qty
Holder Kit provides excellent accuracy and con- A. Floating Reamer Holder ............................. 1
trol when chambering gun barrels. The holder B. Round-Nose Dead Center .......................... 1
compensates for a small amou

Resumo do conteúdo contido na página número 2

To use the floating reamer holder when cham- 6. Move the tailstock forward until the rounded bering a gun barrel: end of the dead center begins to enter the reamer holder (see Figure 3). 1. Set up the barrel in your lathe, per your nor- mal method, centering the bore of the barrel as accurately as possible. 2. Assemble the reamer (not included) and holder by inserting the reamer shank into the holder and tightening the set screws against the reamer flats with a 3mm hex wrench (see Fi