Manual do usuário American Standard 2633.1

Resumo do conteúdo contido na página número 1

INSTALLATION INSTRUCTIONS
AFWALL FLUSH VALVE
WALL-MOUNTED TOILETS
Model 3351, 3352, 3353, 3354, 2257.001, 2633.100, 2634.001
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the Physically Challenged
Thank you for selecting American Standard – the benchmark of fine quality for
over 100 years. To ensure thisproduct is installed properly, please read these
instructions carefully before you begin. (Certain installations may require
professional help.) Also be sure

Resumo do conteúdo contido na página número 2

4 3 Place back-up nuts on both bottom bolts, and Using a level, adjust the top left back-up nut so that the top left-hand bolt only. it is in the same vertical plane as the lower left back-up nut. (If wall surface is irregular, the three back-up Adjust the two lower back-up nuts so that front nuts must be positioned to allow a minimum 1/16" face of nuts is flush with finished wall. gap between fixture and wall surface.) Adjust waste horn to project 5/16" (7mm) from FINISHED WALL finished wall. 1